Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Safety Glass With Wire Mesh: What to Know

Safety glass with wire mesh uses woven wire lenses instead of solid polycarbonate. This guide sets the one mesh pair beside solid-lens glasses that state ANSI Z87.1+ ratings, anti-fog and UV protection, and shows what each listing actually states.

Safety Glass With Wire Mesh: What to Know
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MAGID Y50 Safety Glasses for ConstructionMAGID Y50 Safety Glasses for Construction9.7/10View on Amazon
  2. 2DEWALT DPG94-1D Dominator Z87+ Safety GlassesDEWALT DPG94-1D Dominator Z87+ Safety Glasses9.6/10View on Amazon
  3. 3Ergodyne Skullerz AEGIR Anti Scratch SafetyErgodyne Skullerz AEGIR Anti Scratch Safety9.6/10View on Amazon
  4. 4Crossfire 19218 Wire Mesh Safety GlassesCrossfire 19218 Wire Mesh Safety Glasses9.2/10View on Amazon

Grinding, cutting and chipping throw sparks and chips toward the face, and the eyes need a barrier that stays put while the hands work. Safety glass with wire mesh answers that need with lenses of fine woven wire instead of a solid sheet, so the lens is a screen rather than a pane. This guide sets the one mesh pair beside solid polycarbonate glasses that state impact ratings, anti-fog coatings and UV protection.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

MAGID Y50 Safety Glasses for Construction

MAGID Y50 Safety Glasses for Construction

MAGID9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Gray polycarbonate lenses with integrated clear side shields, anti-fog and scratch-resistant coatings, and 99.9% UV protection, in a black nylon frame with temple pads. Each pair ships with a wiper case with a microfiber interior.

Pros

  • ANSI Z87.1+ high-impact rating and CSA Z94.3 compliance
  • Anti-fog and scratch-resistant gray polycarbonate lenses
  • Integrated clear side shields for peripheral protection
  • 99.9% UV protection and a wiper case included

Cons

  • No warranty term is stated in the listing
  • Gray lenses dim the view in dim shops
  • Permanent side shields cannot be taken off
  • No spare lens is included
DEWALT DPG94-1D Dominator Z87+ Safety Glasses

DEWALT DPG94-1D Dominator Z87+ Safety Glasses

DEWALT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Clear-lens safety glasses with a wide wraparound frame, rubber-tipped temples and a rubber nosepiece, rated ANSI Z87.1+ for high impact with 99.9% UVA, UVB and UVC protection.

Pros

  • ANSI Z87.1+ high-impact rating
  • 99.9% protection against UVA, UVB and UVC rays
  • Rubber-tipped temples and nosepiece hold the fit
  • 90 Day Limited Manufacturer warranty stated

Cons

  • No anti-fog treatment is stated
  • No scratch-resistant coating is stated
  • No side shields are stated
  • Clear lens gives no tint for bright work
Ergodyne Skullerz AEGIR Anti Scratch Safety

Ergodyne Skullerz AEGIR Anti Scratch Safety

Ergodyne9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Clear-lens safety glasses with an oversized blade-style design, Fog-Off+ anti-fog, EN166 scratch resistance and 99.9 percent UV protection, on a vented frame. The listing meets ANSI/ISEA Z87.1-2020 with the Z87.1+ mark.

Pros

  • Meets ANSI/ISEA Z87.1-2020 with the Z87.1+ mark
  • Fog-Off+ anti-fog beyond ANSI/ISEA Z87.1-2020 and EN166
  • EN166 scratch resistance requirements stated
  • 99.9 percent protection against UVA, UVB and UVC rays

Cons

  • No warranty term is stated in the listing
  • No side shields are stated
  • Clear lens gives no tint for bright work
  • Brow vent stays open to airflow from above
Crossfire 19218 Wire Mesh Safety Glasses

Crossfire 19218 Wire Mesh Safety Glasses

Crossfire9.2/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Wire mesh safety glasses with a matte black frame, the only mesh-lens pair in this guide. The listing states the frame and the dimensions, and states no impact rating, no anti-fog treatment and no UV protection.

Pros

  • Wire mesh lenses, the only mesh pair here
  • Matte black frame stated in the listing
  • Dimensions stated: 9.0 inches x 4.0 inches x 2.0 inches
  • Part number 19218 matches the model number

Cons

  • No ANSI or other impact rating is stated
  • No anti-fog treatment is stated
  • No UV protection is stated
  • No bullets or feature detail beyond the title

Safety glass with wire mesh in one paragraph

A mesh lens is a screen of woven wire, and a solid lens is one sheet of polycarbonate. The Crossfire 19218 (on Amazon) is the mesh pair here, and its listing names a matte black frame with dimensions of 9.0 inches x 4.0 inches x 2.0 inches. The listing states no impact rating, no anti-fog treatment and no UV protection. The solid-lens picks state far more: the MAGID Y50, the DEWALT DPG94-1D (on Amazon) and the Ergodyne Skullerz AEGIR (on Amazon) each state an ANSI Z87.1+ rating and UV protection of 99.9% or 99.9 percent. That gap matters, because a rating is the only check for impact work the listing gives.

Side by side

Lens ANSI rating Anti-fog UV protection
MAGID Y50 Gray polycarbonate ANSI Z87.1+, CSA Z94.3 Anti-fog coating 99.9%
DEWALT DPG94-1D Clear lens ANSI Z87.1+ Not stated 99.9% UVA/UVB/UVC
Ergodyne Skullerz AEGIR Clear lens ANSI/ISEA Z87.1-2020 (Z87.1+) Fog-Off+ anti-fog 99.9% UVA/UVB/UVC
Crossfire 19218 Wire mesh Not stated Not stated Not stated

The table shows the split: the solid-lens picks state a rating and, for the MAGID and Ergodyne listings, an anti-fog treatment, while the mesh pair states none of those.

When solid polycarbonate is the better choice

  • Rated impact work. The MAGID Y50 states ANSI Z87.1+ high-impact protection and CSA Z94.3 compliance, the DEWALT DPG94-1D meets ANSI Z87.1 high impact, and the Ergodyne Skullerz AEGIR meets ANSI/ISEA Z87.1-2020.
  • Anti-fog. The MAGID listing states an anti-fog coating, and the Ergodyne listing states Fog-Off+ anti-fog beyond the ANSI/ISEA Z87.1-2020 and EN166 requirements.
  • UV protection. The MAGID listing states 99.9% UV protection, and the DEWALT and Ergodyne listings state 99.9% or 99.9 percent protection against UVA, UVB and UVC rays.
  • Side coverage. The MAGID Y50 states integrated clear side shields for peripheral protection.

When wire mesh is the better choice

Pick the mesh pair when the job calls for a mesh lens. The Crossfire 19218 is the only mesh listing here, and its matte black frame and stated dimensions are all the listing gives. It states no impact rating, so where the job needs a rated lens, pick from the solid-lens listings.

How to tell what a pair supports

  • The ANSI mark. Look for the Z87.1+ mark in the title or bullets. The MAGID, DEWALT and Ergodyne listings state it; the Crossfire listing does not.
  • Anti-fog wording. The MAGID listing states an anti-fog coating, and the Ergodyne listing states Fog-Off+ anti-fog. The DEWALT and Crossfire listings state no anti-fog treatment.
  • UV wording. The MAGID, DEWALT and Ergodyne listings state 99.9% or 99.9 percent UV protection. The Crossfire listing states no UV protection.
  • Side shields and fit. The MAGID listing states integrated clear side shields, the DEWALT listing states a wraparound frame, and the Ergodyne listing states an oversized blade-style design.
  • The warranty line. Only the DEWALT listing states a warranty with a length, 90 Day Limited Manufacturer. The Ergodyne warranty text ends mid-sentence.

The gear for this guide

The pairs below put the mesh lens beside the solid-lens picks, so the choice rests on stated ratings, not guesswork.

For more options, see our welding safety gear guides.

FAQ for welders

Is wire mesh safety glass rated for impact?

The Crossfire listing states no ANSI rating, so it gives no rated basis for impact work. The MAGID, DEWALT and Ergodyne listings state ANSI Z87.1+ ratings, with the MAGID listing adding CSA Z94.3.

Does wire mesh fog like a solid lens?

The Crossfire listing states no anti-fog treatment. The MAGID listing states an anti-fog coating, and the Ergodyne listing states Fog-Off+ anti-fog.

Can I wear wire mesh safety glasses for grinding?

Grinding throws chips and sparks at the face, and a rated lens is the check the listing gives. The MAGID, DEWALT and Ergodyne listings state ANSI Z87.1+ ratings for flying debris and projectiles, while the Crossfire listing states no rating.

What does ANSI Z87.1+ mean on these glasses?

The MAGID listing states ANSI Z87.1+ as a high-impact standard for flying debris and projectiles. The DEWALT and Ergodyne listings state they meet ANSI Z87.1 and ANSI/ISEA Z87.1-2020.

Do these glasses block UV?

The MAGID listing states 99.9% UV protection, and the DEWALT and Ergodyne listings state 99.9% or 99.9 percent protection against UVA, UVB and UVC rays. The Crossfire listing states no UV protection.

Related: welding goggles vs safety glasses and Yeswelder True Color welding helmet review. Also see the best safety glasses with side shields picks.

More buying guides