Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Ryobi vs Makita Angle Grinder: Which One Should You Buy?

Ryobi vs Makita Angle Grinder: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Makita 9565CV 5" SJS™ High-Power Angle GrinderMakita 9565CV 5" SJS™ High-Power Angle Grinder9.5/10View on Amazon
  2. 2MAKITA 18V LXT Lithium-ION BRUSHLESS CordlessMAKITA 18V LXT Lithium-ION BRUSHLESS Cordless9.4/10View on Amazon
  3. 3Ryobi ZRAG403G 5.5 Amp 4-1/2 in. Angle GrinderRyobi ZRAG403G 5.5 Amp 4-1/2 in. Angle Grinder9.3/10View on Amazon

Verdict. Pick the Makita side for the broader feature set: one cordless X-Lock grinder with the longer stated warranty, and one variable speed grinder with an SJS clutch. Pick the Ryobi only if a renewed grinder with a handle that adjusts for left or right-handed use fits the job and the missing warranty and speed figures do not matter.

A grinder earns its place on the bench when a weld needs cleaning, a cut needs finishing, or a bracket needs trimming to fit. This comparison of ryobi vs makita angle grinder puts the Ryobi listing against the Makita listings on what each listing states, and on what each listing leaves unclear.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The three grinders

Makita 9565CV 5" SJS™ High-Power Angle Grinder

Makita 9565CV 5" SJS™ High-Power Angle Grinder

Makita9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13.0 AMP, 5 in angle grinder with variable speed, an SJS clutch, constant speed control and soft start.

Pros

  • 13.0 AMP motor with variable speed control
  • Speed range stated at 2,800 - 10,500 RPM
  • SJS clutch helps prevent motor and gear damage if the wheel stops
  • Constant speed control maintains speed under load

Cons

  • 1 year warranty, less than the 3-year term on the XAG25Z
  • Single 5 in disc size stated, unlike the dual size XAG25Z
  • No brushless motor or X-Lock system stated
MAKITA 18V LXT Lithium-ION BRUSHLESS Cordless

MAKITA 18V LXT Lithium-ION BRUSHLESS Cordless

Makita9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18V LXT lithium-ion brushless cordless X-Lock angle grinder for 4-1/2 in and 5 in discs, with a 3-year limited warranty.

Pros

  • 18V cordless brushless motor for work away from an outlet
  • X-Lock disc system stated in the title
  • Fits both 4-1/2 in and 5 in discs
  • 3-year limited warranty, the longest term stated here

Cons

  • Bullets describe replacement parts, not the grinder
  • No speed figure stated anywhere in the listing
  • Weight appears only in the spec table at 1.0 pounds
  • Listing does not state whether a battery or charger is included
Ryobi ZRAG403G 5.5 Amp 4-1/2 in. Angle Grinder

Ryobi ZRAG403G 5.5 Amp 4-1/2 in. Angle Grinder

RYOBI9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A renewed 5.5 Amp, 4-1/2 in angle grinder in green, with a 3-position handle for left or right-handed use.

Pros

  • 5.5 Amp motor for a 4-1/2 in disc
  • 3-position handle for left or right-handed use
  • Package weight listed at 5.11 Pounds
  • Stated dimensions help check bench and storage fit

Cons

  • Renewed unit, not a new grinder
  • No warranty term stated in the listing
  • No speed figure stated in the listing
  • Box contents beyond one item are not listed

Other welders and gear to compare

Side by side

Makita 9565CV Angle Grinder Makita XAG25Z Angle Grinder Ryobi ZRAG403G Angle Grinder
Gear Score 63 62 51
Power 13.0 AMP 18V 5.5 Amp
Disc size 5 in 4-1/2 in / 5 in 4-1/2 in
Speed 2,800 – 10,500 RPM Not stated Not stated
Cordless or corded Not stated Cordless Not stated
Weight 8.0 Pounds 1.0 pounds (spec table only) 5.11 Pounds
Warranty 1 year 3-year limited warranty Not stated
Standout feature SJS clutch, soft start X-Lock, brushless motor 3-position handle

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 4 November 2026. None of the listings states a CSA, UL or ETL listing.

Ryobi vs Makita Angle Grinder: Power and Disc Size

The Ryobi ZRAG403G is rated at 5.5 Amp for a 4-1/2 in disc. The Makita XAG25Z is an 18V cordless brushless grinder with X-Lock, sized for 4-1/2 in and 5 in discs. The Makita 9565CV is rated at 13.0 AMP for a 5 in disc. An amp rating and a volt rating do not compare directly, so the listings do not settle which side delivers more power, and only the Makita side states a cordless option, on the XAG25Z. See our best cordless angle grinder for home garage guide for cordless picks.

Speed Control

Only the 9565CV states speed figures. Its listing gives a variable speed dial, a range of 2,800 – 10,500 RPM, constant speed control that applies additional power to maintain speed under load, and soft start for smooth start-ups. Neither the Ryobi listing nor the XAG25Z listing states a speed figure, so speed control cannot be compared across all three. Our fixed vs variable speed angle grinder guide explains the difference.

Weight and Handling

The Ryobi listing states a 3-position handle for left or right-handed use and a spec table weight of 5.11 Pounds. The 9565CV spec table states 8.0 Pounds. The XAG25Z spec table states 1.0 pounds, well below the other two table figures, but its title and bullets state no weight at all, so treat that figure with care. Handling is where the Ryobi listing is strongest on paper, with the adjustable handle, while the Makita listings state no handle adjustment.

Warranty

The warranty gap is clear. The XAG25Z listing states a 3-year limited warranty, the 9565CV listing states 1 year, and the Ryobi listing states no warranty term. A buyer who weighs warranty terms will rank the XAG25Z first on this point alone, but the XAG25Z listing is also the one with off-topic bullets, so its warranty figure comes from the spec table, not from a detailed warranty description.

Choose the Ryobi ZRAG403G if

  • You want a 4-1/2 in grinder with a handle that adjusts for left or right-handed use.
  • A renewed unit is acceptable for the job.
  • You do not need a stated warranty or stated speed figures.
  • You work with a single disc size.

Choose the Makita side if

  • You want cordless work, on the 18V XAG25Z with X-Lock.
  • You want variable speed, on the 9565CV at 2,800 – 10,500 RPM.
  • You want a stated warranty term, with 3-year limited on the XAG25Z or 1 year on the 9565CV.
  • You want a dual disc size option, on the XAG25Z at 4-1/2 in and 5 in.

Before You Strike an Arc

  • Wear safety glasses and a face shield for grinding work, plus gloves and flame resistant clothing.
  • Work with good ventilation, clear anything flammable from the area, and keep an extinguisher close.
  • Check the disc size against the grinder: 4-1/2 in or 5 in as each listing states.
  • On the Ryobi, set the handle for left or right-handed use before starting, and confirm the guard and disc are fitted per the manual.
  • Check on arrival that the disc size, handle and stated features match the listing, and confirm the warranty term in writing.

FAQ for welders

Which Makita grinder is cordless?

The Makita XAG25Z is the cordless pick here, an 18V LXT lithium-ion brushless grinder with X-Lock. It is sized for 4-1/2 in and 5 in discs. The 9565CV listing states a 13.0 AMP rating and no cordless claim.

What does SJS do on the Makita 9565CV?

SJS is a mechanical clutch system that lets the drive shaft slip if the wheel is forced to stop. The listing says it helps prevent motor and gear damage. It is stated only on the 9565CV, not on the other two listings.

Is the Ryobi ZRAG403G a new grinder?

No, the title states that it is renewed. It is a green 5.5 Amp, 4-1/2 in disc grinder with a 3-position handle. The listing states no warranty term, so a buyer should confirm the renewed terms before buying.

Which listing states the longer warranty?

The XAG25Z states a 3-year limited warranty, against 1 year on the 9565CV. The Ryobi listing states no warranty term at all. Warranty alone favors the XAG25Z, but its bullets are off-topic, so read the title and spec table for its facts.

Why is the Makita XAG25Z listing hard to judge?

Its bullets describe replacement parts that are a favorite among lawn and landscape professionals, which does not describe this grinder. The useful facts come from the title and spec table: 18V cordless, brushless, X-Lock, 4-1/2 in and 5 in discs, and a 3-year limited warranty. Its weight appears only in the spec table, at 1.0 pounds.

Related: best angle grinder side handle, Bosch vs Ryobi angle grinder, angle grinder vs rotary tool, and best safety glasses for grinding.

Scoring, line by line

Each grinder is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Makita 9565CV Angle Grinder 9.5 29 21 20 0 2
Makita XAG25Z Angle Grinder 9.4 26 20 18 0 3
Ryobi ZRAG403G Angle Grinder 9.3 23 20 19 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides