Metatarsal vs Steel Toe Boots: Which One Should You Buy?
Metatarsal guards add instep coverage over boots a welder already owns, while steel toe boots carry toe protection and grip built in.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
STLFLX - MetGUARDZ™ Metatarsal Guard for Safety9.7/10View on Amazon - 2
STLFLX - MetGUARDZ™ Metatarsal Guard for Safety9.6/10View on Amazon - 3
NORTIV 8 Men's Waterproof Steel Toe Work9.6/10View on Amazon - 4
Furuian Steel Toe Boots for Men Women Lightweight9.6/10View on Amazon
Verdict. Pick metatarsal guards when falling stock threatens the top of the foot, and pick steel toe boots when toe protection and all-day wear are the job.
Metatarsal vs steel toe boots is a choice between two kinds of foot protection that cover different parts of the foot. A steel toe cap guards the toes, while a metatarsal guard shields the instep and works with the toe protection already in the boot. This comparison puts the two MetGUARDZ guards against the Furuian and NORTIV 8 boots.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Metatarsal vs steel toe boots: the 4 examples

STLFLX - MetGUARDZ™ Metatarsal Guard for Safety
A pull-on metatarsal guard with straps provided, adding instep coverage over safety boots.
Pros
- Pull-on fit with straps provided for the 605
- Hinged injection moulded nylon blend construction
- Resists slag, acid, alkalis, fuel oil and high or low temperatures
- 75 lbs impact figure under ASTM F2413/F2412 and CSA Z195 criteria
Cons
- Adds coverage only over boots already owned
- No warranty term is stated
- Adds bulk over the laces and instep
- Covers the metatarsal, not the toe cap

STLFLX - MetGUARDZ™ Metatarsal Guard for Safety
A lace-up metatarsal guard using the boot's existing laces, matching the strap version's build and impact criteria.
Pros
- Uses the boot's existing laces, with no straps to keep
- Hinged injection moulded nylon blend construction
- Resists slag, acid, alkalis, fuel oil and high or low temperatures
- 75 lbs impact figure under ASTM F2413/F2412 and CSA Z195 criteria
Cons
- Adds coverage only over boots already owned
- No warranty term is stated
- Needs the boot's laces free to thread on
- Covers the metatarsal, not the toe cap

NORTIV 8 Men's Waterproof Steel Toe Work
A waterproof steel toe boot with an ASTM F2413-18 toe cap, rubber lug outsole and cushioned insole.
Pros
- Steel toe cap meets the ASTM F2413-18 standard
- Waterproof suede and membrane structure
- Rubber lug outsole with an MD cushioned insole
- Impact-resistant rubber toe and reinforced heel
Cons
- No metatarsal coverage beyond the toe cap
- No puncture-resistant midsole is stated
- No width option is stated
- This listing covers size 10 only

Furuian Steel Toe Boots for Men Women Lightweight
A lightweight steel toe boot with an ASTM F2413-18 toe cap, anti-puncture midsole and slip-resistant sole.
Pros
- Steel toe cap meets the ASTM F2413-18 standard
- Anti-puncture midsole in a multi layer sole
- Slip-resistant pattern on the rubber sole
- Suede upper with microfiber lining, in width options
Cons
- No metatarsal coverage beyond the toe cap
- No waterproofing is stated
- No cushioned insole is stated
- No reinforced heel is stated
Other welders and gear to compare
Hogent Steel Toe Boots for MenCheck price on Amazon
LugzCheck price on Amazon
Mens Work Boots Steel Toe Chelsea Safety Boots Cow LeatherCheck price on Amazon
HISEA Men's Steel-Toe Rain BootsCheck price on Amazon
KELODON Waterproof Steel Toe Boots For Men Safety Work ShoesCheck price on Amazon
NORTIV 8 Men's Waterproof Steel Toe Work Boots Slip ResistantCheck price on Amazon
Side by side
| MetGUARDZ SEN 605 | MetGUARDZ SEN 600 | NORTIV 8 Paladin-Steel | Furuian Pioneer | |
|---|---|---|---|---|
| Gear Score | 73 | 72 | 71 | 69 |
| Side | Metatarsal | Metatarsal | Steel toe boots | Steel toe boots |
| What it is | Straps over boots | Laces onto boots | Steel toe boot | Steel toe boot |
| Coverage | Metatarsal and laces | Metatarsal and laces | Steel toe cap | Steel toe cap |
| Standard | ASTM F2413/F2412, CSA Z195 | ASTM F2413/F2412, CSA Z195 | ASTM F2413-18 | ASTM F2413-18 |
| Impact figure | 75 lbs | 75 lbs | Not stated | Not stated |
| Attachment | Straps provided | Existing laces | Not stated | Not stated |
| Upper | Nylon blend | Nylon blend | Waterproof suede and membrane | Suede, microfiber lining |
| Sole | Not stated | Not stated | Rubber lug outsole | Anti-puncture midsole |
| Water | Not stated | Not stated | Waterproof suede | Not stated |
| Warranty | Not stated | Not stated | Not stated | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (14 November 2026). No listing states a warranty term.
What each side covers
The difference starts with coverage. A steel toe cap sits over the toes and guards them against falling objects and compression. A metatarsal guard sits over the instep and the laces, working with existing toe protection to deflect the impact of falling debris. The guards are add-ons that transfer between pairs, while the boots carry the toe cap built in.
Standards and impact figures
Both sides state an ASTM standard, but the figures differ. The two MetGUARDZ guards state a 75 lbs impact figure under ASTM F2413/F2412 and CSA Z195 impact criteria. The Furuian and NORTIV 8 boots state an ASTM F2413-18 steel toe cap, with no impact figure. The guard figure and the boot standard describe different parts of the foot, so a direct impact comparison stays unclear.
Fit and attachment
The SEN 605 pulls on and uses straps provided with the guard, while the SEN 600 laces on using the boot’s existing laces. The Furuian boot lists width options and a size of 10.5 Women/9 Men, and the NORTIV 8 boot is listed in size 10. See the steel toe vs composite toe welding boots guide for more on toe cap choices.
Build and materials
The guards share one build: an injection moulded proprietary nylon blend with a hinged feature. The maker states the guards resist slag, acid, alkalis, fuel oil, and high or low temperatures. The Furuian boot uses a suede upper with microfiber lining and a multi layer sole with an anti-puncture midsole, plus a slip-resistant pattern. The NORTIV 8 boot uses waterproof suede and a membrane structure, a rubber lug outsole, an MD cushioned insole and a reinforced heel. See the welding safety boots guide for what to look for in shop footwear.
Choose metatarsal guards if
- Falling stock threatens the top of the foot.
- Owned boots have toe protection and only the instep needs covering.
- One guard moves between pairs of footwear.
- Slag, sparks and dirt reach the laces and instep.
Choose steel toe boots if
- The job needs toe protection and grip in one pair.
- All-day wear matters, with a cushioned insole stated on the NORTIV 8.
- Wet floors call for a waterproof boot, and the NORTIV 8 states waterproof suede and membrane.
- One purchase covers the toes, with no add-on.
FAQ for welders
Do steel toe boots protect the metatarsal?
No. A steel toe cap covers the toes, while the metatarsal is the instep above the toes. The guards here cover the instep and the laces and work with existing toe protection.
Can metatarsal guards fit over any safety boot?
The SEN 600 needs the boot’s laces free to thread on, while the SEN 605 uses straps provided with the guard. Each cover is transferable, so one guard can move between pairs.
What standard do these guards and boots state?
The two MetGUARDZ guards state ASTM F2413/F2412 and CSA Z195 impact criteria, with a 75 lbs impact figure. The Furuian and NORTIV 8 boots state an ASTM F2413-18 steel toe cap.
Do any of these state a warranty?
No listing here states a warranty term. The Furuian listing mentions a 360-day care promise, which is not a warranty term.
Related: welding safety boots, steel toe vs composite toe welding boots, and the welding safety gear guides.
Scoring, line by line
Each example is scored out of 10 on performance, build, value, safety and warranty, with weights on the How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MetGUARDZ SEN 605 | 9.7 | 30 | 21 | 21 | 9 | 0 |
| MetGUARDZ SEN 600 | 9.6 | 30 | 21 | 20 | 9 | 0 |
| NORTIV 8 Paladin-Steel | 9.6 | 30 | 21 | 20 | 8 | 0 |
| Furuian Pioneer | 9.6 | 29 | 20 | 20 | 8 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.
Before you strike an arc. Wear a helmet with the right shade, safety glasses underneath, leather gloves and flame resistant clothing. Check that each guard sits over the laces or straps without shifting. Weld with good ventilation, clear flammables from the area, and keep an extinguisher close.




