Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Steel Toe vs Soft Toe Welding Boots: Which One Should You Buy?

Steel toe protects against falling objects and compression, soft toe skips the cap, and four listings show how the trade-off plays out in real boots.

Steel Toe vs Soft Toe Welding Boots: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1NORTIV 8 Men's Steel Toe Work Boots Side Zipper SafetyNORTIV 8 Men's Steel Toe Work Boots Side Zipper Safety9.6/10View on Amazon
  2. 2KELODON Waterproof Steel Toe Boots For Men Safety Work ShoesKELODON Waterproof Steel Toe Boots For Men Safety Work Shoes9.5/10View on Amazon
  3. 3Furuian Steel Toe Boots for Men Women Lightweight Work BootsFuruian Steel Toe Boots for Men Women Lightweight Work Boots9.5/10View on Amazon
  4. 4NORTIV 8 Men's Waterproof Steel Toe Work BootsNORTIV 8 Men's Waterproof Steel Toe Work BootsView on Amazon
  5. 5ZBVB Slip On Steel Toe Chelsea Work BootsZBVB Slip On Steel Toe Chelsea Work BootsView on Amazon
  6. 6TOUGHSTEPS Soft Toe Work Boots for Men 6" Comfort Leather NonTOUGHSTEPS Soft Toe Work Boots for Men 6" Comfort Leather NonView on Amazon
  7. 7GUBANGDUN Steel Toe Work Boots for Men Slip-on Welding WorkGUBANGDUN Steel Toe Work Boots for Men Slip-on Welding WorkView on Amazon
  8. 8SFSDOUN Welding Boots for MenSFSDOUN Welding Boots for MenView on Amazon
  9. 9ARIAT Men's Sierra Wide Square Toe Work BootARIAT Men's Sierra Wide Square Toe Work BootView on Amazon

A grinder kicks, a cutoff wheel drops, a length of angle iron slides off the bench. That is the moment the toe cap earns its keep. Steel toe vs soft toe welding boots comes down to one question: does your floor carry falling weight that can crush a toe, or does it ask for footwear with no cap that you can wear all shift? Steel toe guards against heavy falling objects and compression; soft toe skips the cap. This guide compares the two on protection, water resistance, grip, weight and comfort, using four boots from the listings.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Steel toe vs soft toe welding boots in one paragraph

A steel toe boot carries a hard cap over the toes, and the NORTIV 8 listing states its cap meets the ASTM F2413-18 standard for toe protection against heavy falling objects and compression. A soft toe boot has no cap: the Wolverine and CAT listings describe ordinary work boots with no toe standard stated. The ZBVB listing states 204J impact resistance and a Kevlar midsole, which puts it on the steel side even though it slips on like a Chelsea boot. In short, steel toe buys stated impact protection; soft toe buys a boot with no cap at all.

Side by side

NORTIV 8 Steel Toe ZBVB Steel Toe Chelsea Wolverine Floorhand CAT Second Shift
Toe Steel, ASTM F2413-18 Steel, 204J impact resistance Soft toe Soft toe
Water protection Suede and membrane barrier Leather, sealed seams Full-grain leather Not stated
Outsole and grip Rubber lug outsole Wear-resistant rubber outsole, 3D anti-slip texture Rubber outsole Slip-resistant (stated)
Insole and comfort MD cushioned insole Shock-absorbing cushioning Cushioned footbed Not stated
Midsole Not stated Kevlar midsole Not stated Not stated
Weight (listed) Not stated Not stated 1.9 lb 3.0 lb
Height and style Not stated Slip-on Chelsea 6 inch boot Not stated
Listing size 10.5 8 men, 9.5 women 10 9.5

Sizes and weights here are the sizes of the listed items, not size ranges: the NORTIV 8 listing is a 10.5, the ZBVB listing is an 8 for men and 9.5 for women, the Wolverine listing is a 10 and the CAT listing is a 9.5. Weights are listed only for the two soft toe boots, at 1.9 lb and 3.0 lb.

When steel toe is the better choice

  • Falling weight. Your floor has plate, pipe or tools that can land on a toe.
  • A rated toe is required. Your site or employer asks for a stated standard, and the NORTIV 8 listing states ASTM F2413-18.
  • Sharp scrap on the floor. The ZBVB listing pairs its steel toe with a Kevlar midsole.
  • Fast on and off with protection. The ZBVB Chelsea slips on with no laces and states 204J impact resistance.

When soft toe is the better choice

  • Lowest listed weight. The Wolverine lists 1.9 lb, the lowest weight stated among the four listings here.
  • All-day wear. You want full-grain leather and a cushioned footbed, both stated in the Wolverine listing.
  • A plain boot. The CAT listing is a slip-resistant soft toe with little else stated, for a floor with no crush hazard.
  • No hard cap. You climb, kneel or drive often and want no hard cap over your toes.

How to read a boot listing

Four things decide a boot before you order. First, the toe standard: look for a stated standard such as ASTM F2413-18, which the NORTIV 8 listing gives, or a stated impact figure such as the ZBVB listing’s 204J. The Wolverine and CAT titles state soft toe outright, and their listings give no toe standard and no impact figure. Second, the midsole: only the ZBVB listing names one, a Kevlar midsole. Third, water protection: the NORTIV 8 listing describes suede and a membrane, the Wolverine full-grain leather, and the ZBVB leather with sealed seams, while the CAT listing states none. Fourth, weight: only the Wolverine and CAT listings state one, at 1.9 lb and 3.0 lb.

The four boots in this guide

The NORTIV 8 Paladin-Steel has the fullest listing here: a steel toe that meets ASTM F2413-18, water resistant suede with a membrane, a rubber lug outsole, an MD cushioned insole, an impact-resistant rubber toe and a reinforced heel. The listing names construction, welding, maintenance and warehousing as its ground. Its size is a 10.5, and no weight is stated.

The ZBVB Chelsea is the steel toe for fast on and off: a slip-on with no laces, a steel toe with 204J impact resistance, a Kevlar midsole, a wear-resistant rubber outsole with 3D anti-slip texture, and water resistant leather with sealed seams. The listing fits construction, welding, maintenance and outdoor work, in a size 8 for men and 9.5 for women.

The Wolverine Floorhand has the lowest stated weight: 1.9 lb, in a 6 inch height, with full-grain water resistant leather, a rubber outsole and a cushioned footbed. The listing is short and plain: no toe standard, no midsole and no warranty term are stated. Its size is a 10.

The CAT Second Shift is the plainest listing here: a soft toe work boot in dark brown, size 9.5, with a stated weight of 3.0 lb and a single bullet that says slip-resistant. Nothing else is stated: no water protection, no insole, no midsole and no warranty term. It is the boot to pick when the floor needs grip and nothing else is required.

Can one pair do both jobs?

No single boot here does both. A steel toe cap is built into the boot, not added later, so a soft toe boot here cannot gain a rated cap. If your week splits between a fab floor with falling plate and a shop with no crush hazard, the honest answer is a pair for each kind of day: a rated steel toe for the heavy days and a soft toe for the light ones. The NORTIV 8 and ZBVB cover the heavy days; the Wolverine and CAT cover the days with no crush hazard.

Sparks, slag and fumes. Welding throws sparks and hot slag that can burn through ordinary clothing and melt synthetic fabrics, so wear leather or flame-resistant layers and keep cuffs clear of the work. Fumes rise from the arc, so weld with ventilation or outdoors with your head out of the plume, and clear dry grass and anything flammable from the area. Check the boot listing for a stated toe standard before you rely on it for crush protection.

FAQ for welders

Do I need steel toe boots for welding?

It depends on the hazards on your floor. If plate, pipe or tools can fall on your feet, a rated steel toe such as the NORTIV 8 listing’s ASTM F2413-18 cap is the call. If nothing heavy can land on a toe, the crush case for a steel toe goes away, and the Wolverine and CAT listings are the soft toe examples here.

Are soft toe boots allowed on a job site?

That depends on the site, not the boot. Some sites require a rated toe, and a soft toe boot has no toe standard to show. Check the site rules before you buy: the Wolverine and CAT listings state no toe standard at all.

What does ASTM F2413-18 mean?

It is the standard the NORTIV 8 listing states for its steel toe, covering toe protection against heavy falling objects and compression. A listing that states a standard gives you a figure to check; a listing that states none gives you no figure to check.

Is a steel toe boot heavier than a soft toe boot?

The listings here do not say: only the two soft toe boots state a weight, at 1.9 lb for the Wolverine and 3.0 lb for the CAT, while the steel toe listings state no weight. Do not assume a weight the listing does not give.

Can I wear steel toe boots all day?

Comfort depends on the insole and the fit, not the cap alone. The NORTIV 8 listing describes an MD cushioned insole for long hours on foot, and the ZBVB listing describes shock-absorbing cushioning. Break in any new pair before a long shift, and check the listing for the size you need.

Do welding boots need to keep water out?

It depends on your floor. The NORTIV 8, Wolverine and ZBVB listings all describe water resistant leather or a membrane, while the CAT listing states no water protection. If you work in wet conditions, pick a listing that states it; if your floor stays dry, it matters less.

Related: high top vs low top welding boots, welding gloves for a snug fit and heavy duty welding boot laces.

More buying guides