Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Welding Safety Boots: What to Look For

Welding safety boots need a protective toe that meets a stated impact standard, slip resistance and electrical hazard protection, and two NORTIV 8 boots show how those standards and weights compare.

Welding Safety Boots: What to Look For
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1NORTIV 8 Men's Composite Toe Work Boots SlipNORTIV 8 Men's Composite Toe Work Boots Slip9.6/10View on Amazon
  2. 2NORTIV 8 Men's Composite Toe Work Boots SideNORTIV 8 Men's Composite Toe Work Boots Side9.6/10View on Amazon

A hot offcut slides off the bench and lands on your boot, a bead of slag bounces off the toe, and the shop floor is slick where cutting oil spilled. Welding safety boots are the gear that stands between that work and your feet: a boot with a protective toe that meets a stated impact standard, slip resistance for slick floors, and electrical hazard protection for shop work. This guide explains what each of those standards means on the listing, and shows the boots that state them.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

NORTIV 8 Men's Composite Toe Work Boots Slip

NORTIV 8 Men's Composite Toe Work Boots Slip

NORTIV 89.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A composite toe work boot with a zipper and lace-up closure, an E-TPU midsole and ASTM F2413-24 impact, electrical hazard and slip resistance standards stated.

Pros

  • ASTM F2413-24 I/75 impact resistance with a nano composite toe
  • ASTM F2413-24 EH and SR standards for electrical hazard and slip resistance
  • Approx. 22.5 oz per boot with a thick E-TPU midsole for energy return
  • Zipper for easy wear plus a lace-up closure for adjustable fit

Cons

  • No warranty term is stated
  • Heavier per boot than the Peakforce-Nano at approx. 22.5 oz against 21.83 oz
  • No outsole material is stated
NORTIV 8 Men's Composite Toe Work Boots Side

NORTIV 8 Men's Composite Toe Work Boots Side

NORTIV 89.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A composite toe work boot with a side zipper, an EVA midsole and a lugged rubber outsole, stating ASTM F2413-24 impact, electrical hazard and slip resistance.

Pros

  • Approx. 21.83 oz per boot, the lighter boot here
  • ASTM F2413-24 I/75 impact resistance with a nano composite toe
  • ASTM F2413-24 EH and SR standards for electrical hazard and slip resistance
  • Lugged rubber outsole and a mesh-covered latex insole for airflow

Cons

  • No warranty term is stated
  • Only a side zipper is stated, with no lace-up closure
  • The title names ASTM F2412-24 and ASTM F2913-24 while the bullets name ASTM F2413-24
  • No item weight is stated in the spec table

Welding safety boots: what the standards mean

Both boots here state ASTM F2413-24, and the letters after it name what the boot is rated for. I/75 names the impact resistance the toe meets: the listing states the nano composite toe meets it, so the toe is rated for impact rather than just shaped like a safety toe. EH names the electrical hazard protection the boot meets, which the maker ties to a lower risk of electric shock. SR names the slip resistance the boot meets: both listings state it, and the Terrascope-nano listing ties it to slippery and muddy conditions while the Peakforce-Nano listing ties it to a lugged rubber outsole on slippery ground. A boot that states each of them shows a standard for toe impact, electrical hazard and slip resistance in one listing, which is what to look for.

Side by side

Boot Gear Score Toe Weight Closure Standards
NORTIV 8 Terrascope-nano 9.6/10 Nano composite Approx. 22.5 oz per boot Zipper and lace-up ASTM F2413-24 I/75, EH, SR
NORTIV 8 Peakforce-Nano 9.6/10 Nano composite Approx. 21.83 oz per boot Side zipper ASTM F2413-24 I/75, EH, SR

The two boots state the same standards and the same kind of toe, so the differences are weight, closure, midsole, upper, outsole and insole. The Terrascope-nano lists a thick E-TPU midsole with a zipper and a lace-up closure, while the Peakforce-Nano lists an EVA midsole with a side zipper only. Check the size on the box before ordering: the Terrascope-nano listing is size 9.5 with its weight based on size 9, and the Peakforce-Nano listing is size 11 with its weight based on size 9.

What to look for in a welding safety boot

  • A stated toe standard. Look for ASTM F2413-24 I/75 on the listing, as both boots here state it, rather than a toe that only looks protective.
  • Electrical hazard protection. Both listings state ASTM F2413-24 EH, which the makers tie to a lower risk of electric shock.
  • Slip resistance. Both listings state ASTM F2413-24 SR. The Terrascope-nano listing ties it to slippery and muddy conditions, and the Peakforce-Nano listing ties it to a lugged rubber outsole.
  • Weight per boot. The listings state approx. 22.5 oz per boot for the Terrascope-nano and approx. 21.83 oz per boot for the Peakforce-Nano, each based on size 9.
  • Closure and fit. The Terrascope-nano pairs a zipper with a lace-up closure for an adjustable fit, while the Peakforce-Nano uses a side zipper for fast wear and removal.
  • Arch support and airflow. The Terrascope-nano lists a synthetic leather insole with contoured arch support, and the Peakforce-Nano lists a mesh-covered latex insole that promotes airflow.

The boots

The boots below cover the standards above: both state a composite toe, electrical hazard and slip resistance, so the choice comes down to closure, midsole, weight and the rest of the build.

FAQ for welders

Do welding safety boots need a composite toe?

Not necessarily. Both boots here use a nano composite toe that meets ASTM F2413-24 I/75 for impact resistance, per the listings, and the composite toe gives toe protection with heat and cold insulation, per the listings. The Peakforce-Nano listing calls its boots lighter than traditional steel toe boots. A toe that states the standard is what to look for, rather than a toe that only looks protective.

What does ASTM F2413-24 mean on a work boot?

Per the listings here, ASTM F2413-24 is the standard the boots meet, with I/75 for impact resistance, EH for electrical hazard resistance and SR for slip resistance. Both boots state each of them. The Terrascope-nano listing also states the toe gives heat and cold insulation, and the Peakforce-Nano listing states the same.

Are these boots lighter than steel toe boots?

The Peakforce-Nano listing states its boots are lighter than traditional steel toe boots, and lists approx. 21.83 oz per boot based on size 9. The Terrascope-nano listing lists approx. 22.5 oz per boot based on size 9. Neither listing states a steel toe boot weight to compare against, so the lighter claim is the maker’s own.

Which boot fits a welder who wants fast on and off?

The Peakforce-Nano, per its listing: a smooth side zipper enables fast wear and removal, and the listing names construction workers, machine operators, security staff, electricians, truck drivers and carpenters. The Terrascope-nano pairs its zipper with a lace-up closure for an adjustable fit.

Do these boots have a warranty?

No. Neither listing states a warranty term, so both boots score zero on warranty. The Terrascope-nano listing states a smooth zipper and a lace-up closure, and the Peakforce-Nano listing states a smooth side zipper, but neither listing puts a warranty in writing.

Related: the welding safety gear hub, our welding safety gear checklist for beginners, the best welding jacket picks and the best welding gloves for beginners.

Scoring, line by line

Each boot is scored on performance, build, value, safety and warranty. How we pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
NORTIV 8 Terrascope-nano 9.6 30 21 21 7 0
NORTIV 8 Peakforce-Nano 9.6 29 21 21 7 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

Hot slag and sparks on boots. Sparks and hot slag land on boots as well as on jackets, so check the uppers after a session and brush off slag before it sits. Weld with good ventilation or outdoors with your head out of the plume, and clear dry grass and anything flammable from the area. Fasten gas cylinders upright with a chain, and check hoses and connections before lighting the torch.

More buying guides