How to Use Weld Through Primer on Bare Steel
How to use weld through primer on bare steel, from prep to the first bead, with the primers that protect the joint between the parts.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Eastwood Durable Organic Binders Self Etching Weld9.6/10View on Amazon - 2
LAUCO Zinc Coat Weld-Thru Primer 15.5 oz9.6/10View on Amazon - 3
Dominion Sure Seal 24080 Copper Weld-Thru Primer9.6/10View on Amazon
A patch panel goes back on bare steel, and the seam will rust from the inside if nothing protects it. Weld through primer is the coat you spray on the joint before you weld, so the metal between the parts stays protected after the bead cools. This guide shows how to use weld through primer on bare steel, from prep to the first bead, and compares the primers here on base, processes and can size.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Eastwood Durable Organic Binders Self Etching Weld
A self-etching gray primer that covers MIG, TIG and Arc welding and helps paint stick to the repair.
Pros
- Covers MIG, TIG and Arc welding
- Self-etching formula enhances paint adhesion
- Helps prevent corrosion on welded and repaired metal
- Reduces weld spatter and heat-related distortion
Cons
- One can per pack, so a big job needs more than one
- No warranty term is stated
- Only gray is offered, so it can show under a light topcoat
- Aerosol only, so it suits spraying and not brush touch-ups

LAUCO Zinc Coat Weld-Thru Primer 15.5 oz
A high zinc coat primer in a 15.5 oz can for MIG and spot welding, made to protect the joint from rust after the weld.
Pros
- High zinc content for corrosion protection between metal surfaces
- Made for MIG and spot welding
- Maintains conductivity while minimizing spatter and heat-affected zones
- Controlled spray pattern for smooth, even coverage
Cons
- No warranty term is stated
- Transparent color, so coverage is hard to see on bare steel
- Aimed at contractors and workshops, so it may be more than a small repair needs
- Made for MIG and spot welding, so TIG and Arc welders need another primer

Dominion Sure Seal 24080 Copper Weld-Thru Primer
A copper-enriched aerosol primer in a 14.46 oz can, made to coat bare metal between welded parts and limit the heat zone.
Pros
- Copper-enriched formula with conductive properties
- Limits the heat zone, distortion and weld spatter
- Adheres to bare metal before welding
- Corrosion protection for welded areas between substrates
Cons
- The maker offers no warranty
- One can per pack, so a big job needs more than one
- Smallest can here at 14.46 oz
- Copper color, so it can show under a light topcoat
How to use weld through primer on bare steel
Start with bare steel. The LAUCO primer adheres to steel and untreated metal, and the Dominion primer provides adhesion to bare metal before welding, so the joint must be bare before you spray. Clean the joint of paint, rust and mill scale, then wipe it so the coat has a clean surface to grip.
Shake the can and spray a thin, even coat over the joint. The LAUCO primer has a controlled spray pattern for smooth, even coverage, and the other primers here are aerosols too. Let the coat dry, then weld through it with the process the primer suits. Follow the can directions for dry time and recoat.
Keep the coat on the parts you weld. The primer sits between the metal surfaces, so it protects the joint after the bead cools. Do not paint over the weld until the joint has cooled and you have cleaned the bead.
Side by side
| Eastwood Self Etching Weld Thru Primer | LAUCO Zinc Coat Weld-Thru Primer | Dominion Sure Seal Copper Weld-Thru Primer | |
|---|---|---|---|
| Base | Self-etching, organic binders | Zinc rich | Copper enriched |
| Can size | 16.1 oz | 15.5 oz | 14.46 oz |
| Pack | 1 | 6 | 1 |
| Welding processes | MIG, TIG and Arc | MIG and spot | Not stated |
| Spatter | Reduces spatter | Minimizes spatter | Helps limit spatter |
| Adhesion | Enhances paint adhesion | Adheres to steel and untreated metal | Adheres to bare metal |
| Warranty | Not stated | Not stated | No warranty |
The Eastwood primer covers MIG, TIG and Arc welding, and the LAUCO primer covers MIG and spot welding. For the Dominion primer, follow the can directions for the processes it suits.
The primers
The primers below tie to the steps above: each one coats the joint before you weld, and they differ in base, processes and can size.
FAQ for welders
Can I weld through primer with a MIG welder?
Yes. The LAUCO primer is made for MIG and spot welding, and the Eastwood primer covers MIG, TIG and Arc welding. Weld through the coat with the process the primer suits, and follow the can directions for prep.
Do I need to remove weld through primer before painting?
No. The Eastwood primer is made to enhance paint adhesion, so paint can go over the primed metal once the weld has cooled and the bead is cleaned. The LAUCO primer also adheres to steel and untreated metal before welding or painting.
Does weld through primer stop rust between welded parts?
It is made to help prevent it. The LAUCO primer is made to protect against corrosion between metal surfaces even after welding, and the Dominion primer is intended for welded areas where corrosion can form between substrates. Keep the coat on the joint and weld through it as the can directs.
Can I use weld through primer on painted metal?
No. The primers here are made for bare metal: the Dominion primer provides adhesion to bare metal before welding, and the LAUCO primer adheres to steel and untreated metal. Remove paint from the joint before you spray.
Related: best flux core welder, best welding table height for standing work, how to choose a MIG welder, and the welding consumables hub.
Scoring, line by line
The Gear Score scores each primer on performance, build, value, safety and warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Eastwood Self Etching Weld Thru Primer | 9.6 | 30 | 21 | 21 | n/a | 0 |
| LAUCO Zinc Coat Weld-Thru Primer | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Dominion Sure Seal Copper Weld-Thru Primer | 9.6 | 28 | 20 | 20 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.
Weld through primer fumes and fire. Primer fumes and welding smoke need ventilation, so use exhaust ventilation or a fume extractor that pulls fumes away from your breathing zone, and keep your head out of the plume. Keep the can away from the arc and hot metal, and clear anything flammable from the area. Follow the can directions and safety precautions, and see the OSHA welding overview.




