Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Hobart 770096 Review: Pros, Cons & Who It’s For

A Hobart 770096 review from the listing: rigid 50 mm dual-cup oxy-acetylene welding goggles with a number-5 shade, snug fit, gaps, and who they suit.

Hobart 770096 Review: Pros, Cons & Who It’s For
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Hobart 770096 Welding Oxy-Acetylene GoggleHobart 770096 Welding Oxy-Acetylene Goggle9.5/10View on Amazon
  2. 2Hobart E71T-11 Flux-Cored Welding Wire 0.030 inHobart E71T-11 Flux-Cored Welding Wire 0.030 inView on Amazon
  3. 3Hobart AirForce 12ci Plasma Cutter 120V with Built-In AirHobart AirForce 12ci Plasma Cutter 120V with Built-In AirView on Amazon
  4. 4Plasma Cutting Consumables for Hobart Airforce 12ci TorchPlasma Cutting Consumables for Hobart Airforce 12ci TorchView on Amazon
  5. 5Hobart 770457 6011 StickHobart 770457 6011 StickView on Amazon
  6. 6Hobart 770460 6011 StickHobart 770460 6011 StickView on Amazon
  7. 7HobartHobartView on Amazon

When you fire up an oxy-acetylene torch to heat rusted farm pins, braze copper fittings, or slice through salvage angle on the welding table, heavy electric hoods get in the way. This hobart 770096 review looks at Hobart’s classic 50 mm eye cup welding goggles: a lightweight, full-rim pair built with a rigid dual cup and a number-5 shade for gas welding and cutting. We have not used these goggles ourselves; this review is based on Hobart’s Amazon listing for style 770096 and the specs published there.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The goggles

Hobart 770096 Welding Oxy-Acetylene Goggle

Hobart 770096 Welding Oxy-Acetylene Goggle

Hobart9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pair of rigid 50 mm dual-cup oxy-acetylene welding goggles with a number-5 shade filter, elastic headband, 4-ounce weight, and a snug fit.

Pros

  • Rigid 50 mm dual cups protect eyes during oxy-acetylene welding and cutting
  • Number-5 shade filter shields against brightness from gas torch cutting and brazing
  • Lightweight 4-ounce build with compact 5 x 0.7 x 5 inch dimensions
  • Elastic headband provides a snug fit to keep goggles in place

Cons

  • No ANSI or other safety certification stated on the listing
  • No warranty term is stated on the listing
  • Shade 5 is not safe for electric arc welding processes like MIG, TIG, or stick

Other welders and gear to compare

Hobart 770096 review: the short verdict

The Hobart 770096 is a dedicated pair of oxy-acetylene welding goggles designed for gas welding, torch cutting, and brazing. Unlike full-coverage welding hoods that shield the entire face from electric arc rays, these classic cup goggles focus strictly on shielding your eyes from the bright glare and scattered sparks of open torch flames. The model number on the listing is 770096.

Several stated features carry the case for these goggles. The rigid 50 mm dual cups house round filter plates that shield your line of sight during torch work. The number-5 shade filter cuts down the glare of burning fuel gas while keeping your puddle and cut line visible. And the lightweight 4-ounce build combined with an elastic headband holds the plastic full-rim frame in a snug fit against your face without dragging on your neck.

The weak spot is what the listing confuses and omits. The spec table lists clear lenses and states acetylene as the lens material, which directly contradicts the number-5 shade filter bullet and the polycarbonate material listed elsewhere. Furthermore, no ANSI safety certification and no warranty term are stated. For shop owners who require documented safety marks, those gaps mean checking with Hobart before buying.

Key specs

Product Filter Shade Eye Cup Weight
Hobart 770096 Number-5 shade 50 mm 4 ounces

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 15 October 2026. Eye cup size describes the diameter of the circular lens housing; visible light transmission percentage measures the proportion of visible light that passes through the filter.

What the Hobart 770096 does well

Rigid 50 mm dual cups for torch work

The 50 mm circular eye cups give you a centered, focused view directly down your torch tip. In tight quarters under a tractor chassis or inside an equipment frame, large hoods bang against frame rails and exhaust pipes. These compact 50 mm cups sit close to your eyes, keeping your field of view clear without awkward bulk. If you are weighing whether to wear a full hood or cup goggles for shop tasks, our welding helmet vs welding goggles guide breaks down the shop trade-offs.

Number-5 shade for fuel gas cutting and brazing

The listing highlights a number-5 shade filter that shields against brightness. A number-5 shade filter is widely used for oxy-fuel torch cutting and light gas welding, shielding against infrared radiation and visible glare while allowing you to watch the molten puddle or cut line form. For the Hobart 770096, the spec table lists a visible light transmission percentage of 1, indicating that approximately 1 percent of visible light passes through the lens. If you replace worn filter discs later, our guide to the best fixed welding lens options covers compatible 50 mm round plates.

Lightweight 4-ounce frame for long cutting sessions

At an item weight of 4 ounces, these goggles put almost no pressure on the bridge of your nose. Long jobs with a cutting torch produce enough radiant heat to make heavy gear miserable. The lightweight plastic full-rim frame keeps bulk to a minimum, measuring 5 x 0.7 x 5 inches. You can wear them through extended cutting and heating chores without the neck strain that comes from balancing a heavy hood.

Snug fit with an elastic headband

Hobart lists an elastic headband designed to keep the goggles firmly in place. The listing rates the fit type as snug, which helps create a physical barrier around your eye sockets against flying slag and burning scale. The simple elastic strap pulls the cups straight against your brow and cheeks, preventing the eye cups from slipping down your nose when you bend over a piece of scrap metal on the floor.

Limitations

  • No safety certification stated: the listing does not state compliance with ANSI, CSA, or any other impact or optical standard. Commercial shops that require certified personal protective gear on paper cannot verify compliance from this listing alone.
  • No warranty term stated: unlike many brand-name welding tools that carry published coverage terms, this listing lists no warranty period. If the frame cracks or the strap snaps early, you are reliant on standard retailer return windows.
  • Listing contradictions on lens details: the listing contains obvious errors in the spec table, claiming clear lenses and listing acetylene as the lens material. While the bullets confirm a number-5 shade filter and polycarbonate construction, buyers should not have to untangle conflicting data.
  • Strictly unsafe for electric arc welding: the listing vaguely calls these goggles ideal for welding applications, but a number-5 shade is far too light for electric arc processes. Using shade 5 for MIG, TIG, or stick welding risks severe arc flash and eye damage; see our guide on what shade for MIG welding to understand safe lens densities.
  • Uncoated lenses: the spec table lists the lens coating as uncoated. Without an anti-fog or hard anti-scratch coating, perspiration in a warm shop can fog the lenses, and abrasive grinding dust can scratch the surface over time.

How we scored it

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Hobart 770096 9.5 28 19 20 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

The Gear Score weighs performance, build, value, safety and warranty, as explained on our how we pick page. The Hobart 770096 earns solid performance marks for its rigid 50 mm cups and proven number-5 shade for torch cutting, along with fair build marks for its light 4-ounce body and snug elastic strap. Build is held back by the listing’s careless data contradictions regarding lens material and color. Safety and warranty both score zero because the listing publishes neither an ANSI safety standard nor a stated warranty duration.

Who should buy the Hobart 770096, and who should skip it

Buy it if

  • You run an oxy-acetylene torch for heating, bending, brazing, or flame cutting.
  • You want a lightweight 4-ounce pair of goggles that will not cause neck fatigue during long sessions.
  • You work in cramped locations where a full-size welding hood cannot fit.
  • You prefer classic 50 mm round cups that accept standard replacement filter plates.

Skip it if

  • You weld with electric arc processes such as MIG, TIG, or stick, which require full-face arc flash protection.
  • Your workplace mandates an explicit ANSI safety certification stamp on your eye protection.
  • You want built-in anti-fog coatings to keep your vision clear in humid shop conditions.
  • You need a product backed by a stated manufacturer warranty term.

Alternatives

Before You Strike an Arc

Before lighting a torch or stepping near hot metal with these goggles, run through these basic setup and inspection checks on your bench:

  • Inspect the 50 mm eye cups upon arrival to ensure the threaded plastic retaining rings seat evenly and the lenses have no cracks or chips.
  • Verify that clear cover lenses are installed in front of the dark number-5 shade filter plates to protect them from hot sparks and spatter.
  • Adjust the elastic headband to establish a snug, light seal around your eyes so scale cannot slip behind the full-rim frame.
  • Confirm your scheduled job uses oxy-acetylene or fuel gas; never strike an electric arc while wearing shade 5 eye protection.

FAQ for welders

Can the Hobart 770096 goggles be used for MIG or TIG welding?

No, you should never use these goggles for MIG, TIG, or stick welding. The number-5 shade is designed strictly for gas welding, torch cutting, and brazing, making it far too light to shield your eyes from high-intensity electric arcs. In addition, goggles leave your cheeks, forehead, and neck completely exposed to harmful radiation and spatter, creating a severe risk of arc flash and skin burns.

What size lenses do the Hobart 770096 welding goggles use?

The Hobart 770096 uses standard 50 mm circular eye cups. This size allows you to swap out scratched lenses or change filter shades by unscrewing the threaded front retaining rings. Most welding supply shops carry compatible 50 mm replacement filter plates and clear protective discs.

What does a number-5 shade protect against?

A number-5 shade filter protects against the intense glare, infrared radiation, and ultraviolet rays produced by oxy-fuel torches. On this Hobart model, the listing specifies a visible light transmission percentage of 1, cutting down the glare of burning fuel gas so you can track your work. This shade level suits general oxy-fuel cutting and light gas welding.

Are the Hobart 770096 goggles ANSI approved?

The Amazon listing does not state an ANSI certification for the Hobart 770096. While the spec table notes ultraviolet light protection and a polycarbonate build, no official safety standard is referenced in the specifications. If your employer or job site requires certified eye protection on paper, verify the certification with Hobart before purchasing.

Related: welding helmet vs welding goggles, what shade for MIG welding, best fixed welding lens, and the welding helmets hub.

More buying guides