Carbon Felt vs Fiberglass Welding Blanket: Which One Should You Buy?
Carbon felt and fiberglass welding blankets compared by material, size, thickness, and stated temperature figure, with 4 carbon felt picks for bench and floor use.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Large 40x40Inch Welding Blanket Pad Fireproof Flame Retardant9.5/10View on Amazon - 2
2 Pack Welding Blanket 6x8 ft9.7/10View on Amazon - 3
Welding Blanket Fireproof 6x8 Feet9.4/10View on Amazon - 4
Carbon Felt Welding BlanketView on Amazon - 5
HFP 3 Layer Carbon Felt and Fiberglass Welding Blanket 60x70View on Amazon - 6
FLASLD Welding Blanket Fireproof Mat Heat Resistant MaterialView on Amazon - 7
FLASLD Welding Blanket Fireproof Mat 36×48 inch HeatView on Amazon - 8
FLASLD 18×24 inch Welding Blanket Fireproof Mat 5mm HeatView on Amazon - 9
Welding BlanketView on Amazon
Sparks and hot slag leave the joint and land somewhere, so the mat under the work matters. This guide compares carbon felt vs fiberglass welding blanket options using 4 carbon felt picks as the working examples, with fiberglass judged on its own listing figures rather than on a category claim.
Other welders and gear to compare
Carbon Felt Welding BlanketCheck price on Amazon
HFP 3 Layer Carbon Felt and Fiberglass Welding Blanket 60x70Check price on Amazon
FLASLD Welding Blanket Fireproof Mat Heat Resistant MaterialCheck price on Amazon
FLASLD Welding Blanket Fireproof Mat 36×48 inch HeatCheck price on Amazon
FLASLD 18×24 inch Welding Blanket Fireproof Mat 5mm HeatCheck price on Amazon
Welding BlanketCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The difference in one paragraph: carbon felt vs fiberglass welding blanket
Carbon felt blankets are mats of carbon fiber felt, sold in thicknesses from 3.5 mm to 5 mm across the picks here, and they cut to fit a bench or floor area. Fiberglass blankets are the other side of this comparison: glass fiber mats whose stated thickness, temperature figure, size, and cut-to-fit wording must be checked on their own listings. The practical differences come down to stated thickness, stated temperature figure, size, and whether the listing states cut-to-fit or foldable storage, not the material name alone.
Side by side
| Carbon felt | Fiberglass | Notes | |
|---|---|---|---|
| Material | Carbon fiber felt | Glass fiber mat | Check the fiberglass listing for its stated use |
| Thickness stated | 3.5 mm to 5 mm | Varies by listing | Matace states thicker felt helps reduce heat transfer |
| Temperature figure stated | Up to 1800°F or 2200°F on stated picks; Matace states none | Varies by listing | Listings state their own maximums |
| Cut to fit | Matace, Waylander, and TOPDC state it | Check the listing | VEVOR does not state it |
| Foldable storage | Matace, VEVOR, and TOPDC state it | Check the listing | Waylander does not state it |
| Sizes in the picks | 12×12 inch to 40×40 inch | Varies by listing | Measure the bench first |
| Pack | 1 pack or 2 pack | Varies by listing | 2 packs cover bench and floor |
| Warranty stated | Matace states 1 Year Manufacturer | Varies by listing | Others state none |
Temperature figures in the table are the listings’ own maximums for the carbon felt picks that state one. Fiberglass figures vary by listing, so check the fiberglass listing before comparing it with a carbon felt pick.
The gear: 4 carbon felt picks
TOPDC 12×12 Inch 2 Pack. The highest stated temperature figure here, up to 2200°F, in a 5 mm thick carbon felt pad, UL94 fire-retardant certified, at 12×12 inches and 6.7 ounces. It cuts to fit with scissors or a utility knife and folds for storage. The small size suits bench work and stove shielding rather than full floor coverage.
Matace 20×47 Inch 2 Pack. A 5 mm thick carbon felt mat, 20×47 inches, 2 pack, at 1.4 pounds, with a 1 Year Manufacturer warranty. It trims to fit benches, floors, or equipment and folds for storage. The listing also names ASTM D6413 for its felt.
VEVOR 40×40 Inch. The largest coverage here at 40×40 inches, 3.5 mm thick, at 1.08 pounds, with a stated figure up to 1800°F. Reinforced heat-sealed edges resist unraveling, and the mat folds with minimal creasing for storage. It does not state cut-to-fit, so treat trimming as unconfirmed for this pick.
Waylander 24×24 Inch. A 4 mm thick carbon felt mat, 24×24 inches, rated up to 1800°F, with hand wash only care. It cuts easily to fit and works as a welding blanket, heat shield mat, or stove heat shield. No weight or warranty is stated for this pick.
When carbon felt is the better choice
- Cut-to-fit bench coverage. Matace, Waylander, and TOPDC state trimming or easy cutting for benches, floors, or equipment.
- High stated temperatures. TOPDC states up to 2200°F, and Waylander and VEVOR state up to 1800°F.
- Foldable storage. Matace, VEVOR, and TOPDC state foldable designs for moving between job sites.
- 2 pack coverage. Matace at 20×47 inches and TOPDC at 12×12 inches come as 2 packs.
Our best carbon felt welding blanket guide covers more carbon felt picks.
What to check on a fiberglass listing
- Stated temperature figure. Compare it with the carbon felt figures here, up to 1800°F on Waylander and VEVOR and up to 2200°F on TOPDC, before deciding.
- Cut-to-fit wording. Check whether the listing states cutting or trimming, since Matace, Waylander, and TOPDC state it.
- Stated size. Check the size against the bench or floor area, the way the carbon felt picks here run from 12×12 inches to 40×40 inches.
- Pack count. Check whether the listing covers a single mat or a pack, since the carbon felt picks here come as 1 pack or 2 pack.
How to pick the size
Match the mat to the area it must cover. TOPDC at 12×12 inches suits small bench spots and stove shielding, Waylander at 24×24 inches covers a bench section, Matace at 20×47 inches covers a longer bench or floor run, and VEVOR at 40×40 inches covers a wide floor or wall area. A mat that is too small leaves gaps for slag to reach the surface below, so measure the bench or floor before ordering. See welding blanket sizes for more on sizing.
Sparks, slag, and ventilation. A welding blanket catches sparks and slag, but it does not replace ventilation, eye protection, or clearing flammables from the area. Keep the work area clear of dry material, and check the blanket for wear before each use. See our welding safety gear checklist for beginners.
FAQ for welders
Can you cut a carbon felt welding blanket to size?
Matace states trimming for custom fitting, Waylander states easy cutting, and TOPDC states cutting with scissors or a utility knife. VEVOR does not state cut-to-fit, so check that listing before trimming it. For Matace, Waylander, and TOPDC, cutting lets a mat fit the project shape its own listing describes.
What temperature can these carbon felt blankets handle?
TOPDC states up to 2200°F, and Waylander and VEVOR state up to 1800°F. Matace states no temperature figure, so compare it on thickness and size instead. Temperature figures are the listings’ own maximums, so check the listing for the conditions behind them.
Do carbon felt blankets come in a 2 pack?
Matace at 20×47 inches and TOPDC at 12×12 inches come as 2 packs. Waylander at 24×24 inches and VEVOR at 40×40 inches are single packs. Pack count matters when one mat must cover a bench and a floor area at once.
Can a welding blanket replace a fire extinguisher?
No. A blanket catches sparks and slag on a bench, floor, or equipment surface, but it is not a fire extinguisher and does not replace ventilation or clearing flammables from the area. Keep an extinguisher rated for the work nearby and check it before welding.
How do you store a carbon felt blanket?
Matace, VEVOR, and TOPDC state foldable designs for storage and moving between job sites. Waylander states hand wash only care, so clean it by hand, and Waylander does not state a foldable design, so check that listing before folding it away. VEVOR states its mat folds with minimal creasing.
Related: best carbon felt welding blanket, best welding blanket material, welding blanket sizes, fiberglass vs cotton welding blanket, and the welding safety gear hub.




