Best Wall Mounted Magnetic Tool Holder (2026): 4 Holders Compared
Four wall-mounted magnetic tool holders compared by length, hold, mounting and steel for garage and workshop walls.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Double-sidedBEILITEMAG 17 Inch9.7/10View on Amazon - 2
Strongest stated holdDGSL 16 Inch 5-Pack9.6/10View on Amazon - 3
Most piecesSEDY 7-Piece 12 Inch9.6/10View on Amazon - 4
CR-V steelSWANLAKE 4-Piece 12 in9.6/10View on Amazon
A wrench slides off a crowded bench, a screwdriver rolls behind the toolbox, and the next job starts with a search instead of work. A wall mounted magnetic tool holder keeps the hand tools in sight and off the bench, which is the whole point of the best wall mounted magnetic tool holder for a small shop. This guide compares the holders by length, hold, mounting and steel, using only what each maker lists.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Double-sided BEILITEMAG 17 Inch: Magnets on both sides grip a metal surface without drilling, with screws included for other surfaces. Check price on Amazon
- Strongest stated hold DGSL 16 Inch 5-Pack: A single 16 inch strip holds up to 22 lbs, and the 5-pack covers a full bench wall. Check price on Amazon
- Most pieces SEDY 7-Piece 12 Inch: 7 strips of 12 inch alloy steel with a trouser clip and an 11 kg vertical hold. Check price on Amazon
- CR-V steel SWANLAKE 4-Piece 12 in: 4 strips of 12 inch CR-V steel with mounting screws for walls, slatwalls and workbenches. Check price on Amazon
The machines

BEILITEMAG 17 Inch Double Sided Magnetic Tool
A 17 inch double-sided magnetic tool holder, sold as a 2-pack, with magnets on both sides and a 0.94 inch wall gap for knuckle clearance.
Pros
- Magnets on both sides grip a metal surface without drilling
- Mounting screws included for non-magnetic surfaces
- 0.94 inch wall gap protects knuckles during removal
- 17 inch bar holds knives, wrenches, screwdrivers, scissors and saw blades
Cons
- No hold weight is stated
- Metal surface must be thicker than 0.047 inches (1.2 mm) or the holder slides off
- No warranty term is stated
- Sold as a 2-pack, with no single-bar option listed

DGSL Heavy Duty Magnetic Tool Holder
A 5-pack of 16 inch magnetic strips with a steel frame, each strip rated to hold up to 22 lbs, with mounting hardware for wood, drywall or other solid surfaces.
Pros
- A single strip holds up to 22 lbs
- 5 strips of 16 inches cover a full bench wall
- Mounting hardware included; installs horizontally or vertically
- Holds hammers, screwdrivers, pliers, wrenches and sockets
Cons
- No warranty term is stated
- Slatwall mounting is not stated for these strips
- No double-sided mount: the strips fix with screws, not magnets
- No key-holder use is stated, unlike the SWANLAKE and SEDY strips

SEDY Magnetic Tool Holder Storage Organizer
A 7-piece set of 12 inch alloy steel magnetic strips with mounting screws, slatwall mounting, a key-holder use and a magnetic trouser clip.
Pros
- 7 strips give the most pieces here
- Mounts on any slatwall, plus walls, workbenches and vans
- Strips double as a key holder
- Magnetic trouser clip holds screws, bits and small tools on a belt
Cons
- No hold weight is stated for the wall strips
- 12 inch strips are shorter than the 16 and 17 inch strips here
- Steel grade beyond alloy steel is not stated
- No double-sided mounting is stated

SWANLAKE GARDEN TOOLS 4-Piece 12" Magnetic Tool
A 4-piece set of 12 inch magnetic strips in CR-V steel with mounting screws, for walls, slatwalls and workbenches, doubling as key holders.
Pros
- CR-V steel with reinforced magnet strips
- Mounting screws included for walls, slatwalls and workbenches
- 12 inch strips hold wrenches, pliers and screwdrivers
- Strips double as key holders
Cons
- No hold weight is stated
- 4 strips cover less wall than the 5 and 7 piece sets here
- 12 inch strips are shorter than the 16 and 17 inch strips here
- No double-sided mounting is stated
Spec sheet comparison
| Model | Gear Score | Length | Pieces | Hold | Mount | Material |
|---|---|---|---|---|---|---|
| BEILITEMAG 17 Inch | 9.7/10 | 17 in | 2 | Not stated | Screws or metal surface | Not stated |
| DGSL 16 Inch 5-Pack | 9.6/10 | 16 in | 5 | 22 lbs per strip | Mounting hardware | Steel frame |
| SEDY 7-Piece 12 Inch | 9.6/10 | 12 in | 7 | 11 kg vertical | Mounting screws | Alloy steel |
| SWANLAKE 4-Piece 12 in | 9.6/10 | 12 in | 4 | Not stated | Mounting screws | CR-V steel |
Ratings in this table are the makers’ own claims taken from each product page (21 November 2026).
Buying guide: best wall mounted magnetic tool holder
The right holder matches the wall space, the tools on it and the surface it mounts to. Start with length and piece count, then the stated hold, then the mount and the steel.
Length and piece count
Length decides how many tools fit on one strip. The BEILITEMAG bar measures 17 inches and comes as a 2-pack. The DGSL strips measure 16 inches and come as a 5-pack. The SWANLAKE strips measure 12 inches and come as a 4-piece set, while the SEDY strips measure 12 inches and come as a 7-piece set. A longer bar suits a row of wrenches and screwdrivers, while more pieces suit a wall with separate zones for hand tools, keys and small parts. Measure the wall space against the stated lengths before ordering.
Hold strength
Only two listings state a hold figure, so compare those directly and treat the rest as unstated. The DGSL listing rates a single strip at up to 22 lbs, and names hammers, screwdrivers, pliers, wrenches and sockets among the tools it holds. The SEDY listing states a hold of up to 11 kilograms vertically for the magnetic trouser clip, which holds screws, bits and small tools on a belt. The SWANLAKE and BEILITEMAG listings describe powerful magnets without a weight figure, so their hold is not stated.
Mounting
Mounting decides where a strip can live. The SWANLAKE, SEDY and BEILITEMAG listings state mounting screws are included. The DGSL listing includes mounting hardware for wood, drywall or other solid surfaces, and its strips install horizontally or vertically. The SWANLAKE and SEDY strips mount on most slatwall systems, which suits vans, shelving units and mobile workshops. The BEILITEMAG bar is the only one here that sticks to a ferrous metal surface without drilling, and its listing states the metal must be thicker than 0.047 inches (1.2 mm), or the holder slides off.
Double-sided or single-sided
Only the BEILITEMAG bar has magnets on both sides: the inner side grips a metal surface, while the outer side holds metal tools. That suits a steel cabinet, a machine housing or a jobsite toolbox, where drilling is not wanted. The SWANLAKE, DGSL and SEDY strips fix to the wall with screws, so they suit a fixed bench wall, a slatwall or a workbench back. A double-sided bar moves with the metal it sticks to; a screwed strip stays where it is put.
Steel and finish
Steel grade shapes how a strip survives daily use. The SWANLAKE strips use CR-V steel with reinforced magnet strips, and the SEDY strips use alloy steel. The DGSL strips use a durable steel frame with strong magnets. The BEILITEMAG listing names robust materials without a steel grade, so its steel is not stated. A named steel grade is the only material claim to compare across listings; the rest is the maker’s wording, not a figure.
Use as directed. Mount each strip with the screws the maker includes and into a solid surface, and keep the load under the stated hold. The BEILITEMAG listing states the metal surface must be thicker than 0.047 inches (1.2 mm), or the holder slides off. A strip that lets go drops steel tools on feet and benches, so hang the heaviest tool and check it holds before loading the strip.
Before You Strike an Arc
- Check the mounting surface: the DGSL listing names wood, drywall or other solid surfaces, and the BEILITEMAG listing states the metal must be thicker than 0.047 inches (1.2 mm).
- Count the screws in the box on arrival: the SWANLAKE, SEDY and BEILITEMAG listings state mounting screws are included.
- Plan the layout before drilling: the DGSL strips install horizontally or vertically, and the SWANLAKE and SEDY strips mount on most slatwall systems.
- Hang the heaviest tool and check it holds before loading a strip: the DGSL listing rates a single strip at up to 22 lbs.
FAQ for welders
Will a magnetic strip hold a hammer?
The DGSL listing states its strips hold hammers, screwdrivers, pliers, wrenches and sockets, with a single strip rated at up to 22 lbs. The other listings name wrenches, pliers and screwdrivers without a weight figure. Hang the heaviest tool and check it holds before loading the strip.
Do magnetic tool holders need screws?
It depends on the surface. The BEILITEMAG bar sticks to a ferrous metal surface without drilling, and mounting screws come in the box for non-magnetic surfaces. The SWANLAKE and SEDY listings state mounting screws are included, and the DGSL listing includes mounting hardware for wood, drywall or other solid surfaces.
Can I mount a magnetic strip on slatwall?
The SWANLAKE and SEDY listings state their strips mount on most slatwall systems, which suits vans, shelving units and mobile workshop setups. The DGSL listing names wood, drywall or other solid surfaces instead, with no slatwall mounting stated. Check the listing for the strip you buy, since slatwall fit is stated per product.
What tools fit on a magnetic strip?
Every listing here names wrenches, pliers and screwdrivers. The DGSL listing adds hammers, sockets, drill bits and scissors, while the BEILITEMAG listing adds knives, saw blades and screws. The SEDY strips double as a key holder, and the SWANLAKE strips do the same. Match the tool list to the tools on your bench.
How long should a magnetic tool holder be?
The holders here measure 12 inches, 16 inches and 17 inches, in packs of 4 pieces, 5 strips, 7 pieces and a 2-pack. A 17 inch bar suits a long row of tools, while a 7-piece set of 12 inch strips suits separate zones on one wall. Measure the wall space and the tools against the stated lengths before ordering.
Related: the best F clamp rack, the best turning tool holder, the magnetic clamp vs toggle clamp guide, our sheet metal and tubing hub and the best steel workbench.
Scoring, line by line
Each holder is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Magnetic tool holders have no electrical safety listing to state, so every holder here scores zero on that criterion, and no listing here states a warranty term, so the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BEILITEMAG 17 Inch | 9.7 | 32 | 22 | 21 | n/a | 0 |
| DGSL 16 Inch 5-Pack | 9.6 | 30 | 21 | 21 | n/a | 0 |
| SEDY 7-Piece 12 Inch | 9.6 | 29 | 20 | 20 | n/a | 0 |
| SWANLAKE 4-Piece 12 in | 9.6 | 28 | 20 | 20 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




