Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best TIG Rod for Exhaust Work (2026): 3 Compared

Three TIG rod listings compared for exhaust work: ER70S-2, ER70S-6 and ER308L ranked by Shop Score.

Best TIG Rod for Exhaust Work (2026): 3 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TOOLIOM ER70S-6 RodBest OverallTOOLIOM ER70S-6 Rod9.7/10View on Amazon
  2. 2SUA ER308L RodBest for StainlessSUA ER308L Rod9.6/10View on Amazon
  3. 3Weldcote ER70S-2 RodBasic PickWeldcote ER70S-2 Rod9.4/10View on Amazon

Exhaust work means thin tubing, often rusty, sometimes stainless. The best tig rod for exhaust work matches the base metal: ER70S-2 or ER70S-6 for mild steel, ER308L for stainless. We compared three listings on rod type, diameter and pack size, ranked by our scores.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall TOOLIOM ER70S-6 Rod: 5-lb ER70S-6 with vehicles and automotive uses stated; copper-coated. Check price on Amazon
  • Best for Stainless SUA ER308L Rod: ER308L for 304L/308L stainless; x-ray quality welds stated. Check price on Amazon
  • Basic Pick Weldcote ER70S-2 Rod: 1-lb ER70S-2 1/16 in rod; thinnest listing here. Check price on Amazon

The machines

TOOLIOM ER70S-6 Copper-Coated Mild Steel TIG

TOOLIOM ER70S-6 Copper-Coated Mild Steel TIG

TOOLIOM9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-lb pack of 3/32 by 16 in copper-coated ER70S-6 mild steel TIG rod with vehicles and automotive uses stated.

Pros

  • Vehicles and automotive uses stated
  • Copper-coated to resist rust stated
  • 5-lb pack in a plastic case stated
  • Stable arc and less spatter stated

Cons

  • No warranty term is stated
  • Mild steel only, not stainless
  • 16 in length, shorter than 36 in rods
  • High current suitability is a stated claim
SÜA - ER308L - TIG Stainless Steel Welding Rod

SÜA - ER308L - TIG Stainless Steel Welding Rod

SÜA9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-lb pack of 5/32 by 36 in ER308L stainless TIG rod for 304L and 308L stainless, with x-ray quality welds stated.

Pros

  • For 304L/308L stainless stated
  • X-ray quality welds stated
  • Carbon under 0.03% stated
  • DCEN parameters and gas stated

Cons

  • No warranty term is stated
  • 5/32 in is large for thin exhaust tubing
  • Stainless only, not mild steel
  • Main image is for reference only stated
Weldcote Metals ER70S-2 1/16" X 36" Tig Welding

Weldcote Metals ER70S-2 1/16" X 36" Tig Welding

Weldcote Metals9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1-lb pack of 1/16 by 36 in ER70S-2 mild steel TIG rod; the thinnest listing of the three.

Pros

  • ER70S-2 for mild steel
  • 1/16 by 36 in, handy for thin tubing
  • 1-lb pack for small jobs
  • 1.1 lb stated weight

Cons

  • Thinnest listing here, one-line bullets
  • No warranty term is stated
  • No use cases are stated

Other welders and gear to compare

Spec sheet comparison

Model Shop Score Type Size Pack Best for Warranty
TOOLIOM ER70S-6 Rod 9.7/10 ER70S-6 mild steel 3/32 x 16 in 5 lb Mild steel exhaust Not stated
SUA ER308L Rod 9.6/10 ER308L stainless 5/32 x 36 in 2 lb Stainless exhaust Not stated
Weldcote ER70S-2 Rod 9.4/10 ER70S-2 mild steel 1/16 x 36 in 1 lb Mild steel Not stated

All specs here repeat what the maker rates and the listing prints, copied down 21 October 2026.

How to choose the best tig rod for exhaust work

Match the rod to the exhaust metal

Mild steel exhausts take ER70S-2 or ER70S-6; the TOOLIOM listing states vehicles and automotive components among its uses. Stainless exhausts take ER308L; the SÜA listing states 304L and 308L among others.

ER70S-2 vs ER70S-6

Both are mild steel rods. The TOOLIOM ER70S-6 is copper-coated to resist rust with a stated stable arc and less spatter, in a 5-lb pack. The Weldcote ER70S-2 is a 1-lb pack with the thinnest listing here.

Rod diameter and length

Diameters here run 1/16 in (Weldcote) to 3/32 in (TOOLIOM) to 5/32 in (SÜA). Thinner rod suits thin exhaust tubing; the 5/32 in SÜA is the largest here. Lengths are 16 in for the TOOLIOM and 36 in for the other two.

What the listings leave unclear

The Weldcote listing is thin, with a spec table that reads like another product category; trust its title. No listing states a wire feed or amperage range. None of the three listings states a warranty term. Check the rod count per pack on arrival, since only the SÜA listing addresses quantity per pound.

Shielding gas and polarity stated

The TOOLIOM listing states Ar and CO2 mix or 100% CO2 as the shielding gas, with suitability for high welding currents and a stable arc with less spatter. The SÜA listing states DCEN polarity with 100% argon or argon/helium shielding, and names 2% thoriated, 2% ceriated, 2% or 1.5% lanthanated or rare earth tungsten use. The Weldcote listing states no shielding gas and no polarity, so check the machine settings for that rod before striking an arc.

Stated uses beyond exhausts

The TOOLIOM listing names vehicles, shipbuilding, bridges, automotive components and machine engineering, with low alloy steel and mild steel among its uses. The SÜA listing names dairy, food and restaurant equipment, chemical tanks and general purpose work, with cryogenic applications listed as suitable. The Weldcote listing states no use cases, so its fit for exhaust work rests on its type, ER70S-2 mild steel, rather than on stated uses. An exhaust shop that also welds food equipment or tanks gets more use from the SÜA listing, while a shop that welds vehicles and bridges gets more use from the TOOLIOM listing.

Before You Strike an Arc

  • Confirm the exhaust metal first: mild steel takes ER70S-2 or ER70S-6, stainless takes ER308L.
  • The SÜA listing states DCEN polarity with 100% argon or argon/helium; the TOOLIOM states Ar and CO2 mix or 100% CO2.
  • Clean the joint to bare metal; exhaust tubing is often rusty or coated.
  • Thin tubing burns through fast: start low and practice on scrap of the same thickness.

FAQ for welders

Which rod for a mild steel exhaust?

ER70S-2 or ER70S-6. The TOOLIOM ER70S-6 states vehicles and automotive components among its uses.

Which rod for a stainless exhaust?

ER308L. The SÜA listing states 304L and 308L stainless among its uses.

What diameters are these rods?

1/16 in for the Weldcote, 3/32 in for the TOOLIOM, and 5/32 in for the SÜA.

Which of these states a warranty?

None of these states a warranty term.

Scoring, line by line

The Shop Score weighs rod type against the exhaust use case, build and pack quality, value, safety and warranty. None of the three listings states a warranty term, so all three score zero on warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TOOLIOM ER70S-6 Rod 9.7 32 21 21 n/a 0
SUA ER308L Rod 9.6 29 21 20 n/a 0
Weldcote ER70S-2 Rod 9.4 26 19 18 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More welding guides

Also see our best tungsten electrode for steel, pure tungsten vs thoriated tungsten and wired vs wireless TIG foot pedal guides.

More buying guides

Welding Consumables ·

Best Rust Remover for Chrome (2026)

5 rust removers for chrome compared on stated size, form, chrome use and warranty, from sprays and liquid polish to a gallon iron remover.