Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tig Collets for Aluminum (2026): 5 Kits Compared

TIG collet kits for aluminum work compared by size range, torch fit, kit contents and materials, with stated specs only.

Best Tig Collets for Aluminum (2026): 5 Kits Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1RIVERWELD 46pc KitBest OverallRIVERWELD 46pc Kit9.5/10View on Amazon
  2. 2GZTIGWELD 10N24 KitBest 3/32 KitGZTIGWELD 10N24 Kit9.5/10View on Amazon
  3. 3RIVERWELD 9pc JumboBest Jumbo CupsRIVERWELD 9pc Jumbo9.4/10View on Amazon
  4. 4Mtsooning 10pc 3/32Best Replacement SetMtsooning 10pc 3/329.4/10View on Amazon
  5. 5Mtsooning 10pc 1/8Best 1/8 ColletsMtsooning 10pc 1/89.3/10View on Amazon

Aluminum work on the bench usually means a TIG torch in hand and a collet that grips the tungsten without slipping, and the best tig collets for aluminum are the ones that match the torch series and the tungsten size on the job. This roundup compares collet kits from the listings, with sizes, torch fit and kit contents stated as each maker lists them, from a full kit for small torches to matched collet-and-body sets for larger torch series.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall RIVERWELD 46pc Kit: 46 pieces: cups, collets, bodies, gas lens bodies, back caps, gasket Check price on Amazon
  • Best 3/32 Kit GZTIGWELD 10N24 Kit: 5 collets plus 5 bodies, 150A to 350A range stated Check price on Amazon
  • Best Jumbo Cups RIVERWELD 9pc Jumbo: Jumbo cups to 3/4 inch with gas lens and insulator Check price on Amazon
  • Best Replacement Set Mtsooning 10pc 3/32: 10 pieces for WP 17, 18 and 26 torches Check price on Amazon
  • Best 1/8 Collets Mtsooning 10pc 1/8: 10 copper collets at 1/8 inch, 3.2 mm Check price on Amazon

The machines

RIVERWELD TIG Gas Lens Collet Body Ceramic Cups

RIVERWELD TIG Gas Lens Collet Body Ceramic Cups

RIVERWELD9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

46-piece kit for SR WP 9, 20 and 25 torches: 23 alumina cups, 10 collets, 5 collet bodies, 4 gas lens bodies, 3 back caps and 1 cup gasket.

Pros

  • Widest size range here, from 0.020 to 1/8 inch
  • Cups, bodies, back caps and gasket in this kit
  • Gas lens bodies included for gas lens setups
  • Fits SR WP 9, 20 and 25 torches

Cons

  • No warranty term is stated
  • Heaviest kit here at 1.1 pounds
  • No gas lens insulator is named
  • Fit list centers on 9, 20 and 25, not 17, 18 or 26 torches
TIG Collet Body 10N32 (3/32")

TIG Collet Body 10N32 (3/32")

GZTIGWELD9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10-piece kit with 5 collets and 5 collet bodies at 3/32 inch for TIG torch 17, 18 and 26 regular setups.

Pros

  • Matched collets and bodies, same size
  • Stated amperage range of 150A to 350A
  • Fits 17, 18 and 26 torches from Lincoln, Miller, Weldcraft and others
  • Copper collets and bodies

Cons

  • Single size only, 3/32 inch
  • No cups included, only compatibility with 10N-series cups
  • No warranty term is stated
  • No back caps named
RIVERWELD TIG Gas Lens Collet Bodies 45V64 10N24

RIVERWELD TIG Gas Lens Collet Bodies 45V64 10N24

RIVERWELD9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

9-piece jumbo kit for SR WP 17, 18 and 26 torches: 3/32 inch collets, gas lens, insulator and large-diameter ceramic cups.

Pros

  • Jumbo cups to 3/4 inch diameter
  • Gas lens and insulator included
  • Collets for 3/32 inch tungsten electrodes
  • Fits QQ300, DB, PTA, SR, WP and CK torches in 17, 18 and 26

Cons

  • No warranty term is stated
  • Single electrode size, 3/32 inch
  • No back caps named
10PCS 3/32"(2.4mm) TIG Collet Tips & Bodies Kit

10PCS 3/32"(2.4mm) TIG Collet Tips & Bodies Kit

Mtsooning9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10-piece collet tips and bodies kit at 3/32 inch for WP 17, 18 and 26 torches, in copper.

Pros

  • Tips and bodies together in this kit
  • Copper collet tips and bodies
  • Fits Lincoln PTA, Miller Diamondback and Weldcraft torches
  • 10 pieces for replacement needs

Cons

  • Single size only, 3/32 inch
  • No cups or back caps named
  • No warranty term is stated
1/8" 10N25 TIG Collet Tips,10PCS 3.2mm Copper TIG

1/8" 10N25 TIG Collet Tips,10PCS 3.2mm Copper TIG

Mtsooning9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10-piece copper collet kit at 1/8 inch for WP 17, 18 and 26 torches.

Pros

  • 1/8 inch size, above the 3/32 inch picks here
  • Copper collets
  • 10 pieces for replacement needs
  • Fits Lincoln PTA, Miller Diamondback and Weldcraft torches

Cons

  • Collets only, no bodies or cups
  • Single size only, 1/8 inch
  • No warranty term is stated
  • No amperage range stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Pieces Sizes Torch fit Material Weight
RIVERWELD 46pc Kit 9.5/10 46 0.020 to 1/8 in SR WP 9, 20, 25 Copper, ceramic, brass 1.1 pounds
GZTIGWELD 10N24 Kit 9.5/10 10 3/32 in 17, 18, 26 Copper 3.84 ounces
RIVERWELD 9pc Jumbo 9.4/10 9 3/32 in SR WP 17, 18, 26 Copper, ceramic, brass 6.7 ounces
Mtsooning 10pc 3/32 9.4/10 10 3/32 in WP 17, 18, 26 Copper 0.07 kg
Mtsooning 10pc 1/8 9.3/10 10 1/8 in WP 17, 18, 26 Copper 2.08 ounces

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 28 October 2026.

How to choose the best tig collets for aluminum

Torch fit

Collets fit torch series, not torches in general. The 46-piece RIVERWELD kit fits SR WP 9, 20 and 25 torches, while the other kits here fit 17, 18 and 26 torches, with air cooled and water cooled variants named in the listings. The Mtsooning listing advises checking that the collet size matches the equipment before ordering, and that check covers series, then size.

Collet size and tungsten

The collet must match the tungsten electrode diameter. The 46-piece kit spans 0.020, 0.040, 1/16, 3/32 and 1/8 inch, while the GZTIGWELD, jumbo and Mtsooning 3/32 kits sit at 3/32 inch, 2.4 mm, and the Mtsooning 1/8 kit sits at 1/8 inch, 3.2 mm. The GZTIGWELD listing states use with 3/32 inch tungsten electrodes, and the RIVERWELD jumbo listing states work with 3/32 inch tungsten electrodes. For the electrode side, see the tungsten welding electrode picks.

Kit contents

Kits here range from collets only to a full consumables set. The 46-piece kit holds cups, collets, bodies, gas lens bodies, back caps and a gasket, while the GZTIGWELD kit holds matched collets and bodies and the Mtsooning 1/8 kit holds collets only. Gas lens setups use the gas lens bodies named in the RIVERWELD kits, while the GZTIGWELD kit suits a regular setup with 10N-series ceramic cups. For cups, see the tig cup for aluminum picks.

Copper and ceramic

Collets here are copper, and cups are ceramic aluminum oxide where stated. The RIVERWELD kits also name brass and phenolic among their materials. Copper carries current to the tungsten and the ceramic cup shields gas flow.

Before You Strike an Arc

  • Match the collet to the torch series: 9, 20 and 25 for the 46-piece kit, 17, 18 and 26 for the rest.
  • Match the collet size to the tungsten electrode: 3/32 inch for the 3/32 kits here, 1/8 inch for the Mtsooning 1/8 kit.
  • Check the kit contents on arrival: cups, bodies, back caps and gasket in the 46-piece kit; collets only in the Mtsooning 1/8 kit.
  • Gas lens setups use the gas lens bodies and insulator named in the RIVERWELD kits; regular setups use the 10N-series cups named by GZTIGWELD.

FAQ for welders

What size TIG collet do I need for aluminum?

Match the collet to the tungsten electrode diameter, not to the metal alone. Sizes here run from 0.020 to 1/8 inch in the 46-piece kit, with 3/32 inch the common size across the 3/32 kits and 1/8 inch in the Mtsooning 1/8 kit. No listing here states an aluminum-only size.

Do TIG collets fit any torch?

No. Collets fit torch series: the 46-piece kit fits SR WP 9, 20 and 25 torches, while the other kits here fit 17, 18 and 26 torches. Check the series on the torch before ordering, as the Mtsooning listing advises.

What is the difference between a collet and a collet body?

The collet grips the tungsten electrode, and the collet body holds the collet in the torch. Kits here sell them together or apart: the GZTIGWELD kit holds matched collets and bodies, while the Mtsooning 1/8 kit holds collets only.

What comes in a TIG collet kit?

It varies by kit. The 46-piece kit holds cups, collets, bodies, gas lens bodies, back caps and a gasket, the jumbo kit holds collets, a gas lens, an insulator and cups, and the smaller kits hold collets and bodies or collets only. A collet-only kit leaves bodies and cups to buy separately.

Do I need a gas lens for aluminum?

No listing here states a gas lens requirement for aluminum. The RIVERWELD kits include gas lens bodies, and the GZTIGWELD kit suits a regular setup with 10N-series ceramic cups. Either setup appears here, so the choice sits with the kit contents.

See every welding consumables guide.

Also see our tig vs stick for aluminum. Also see our tig gas lens kit for stainless steel. Also see our ceriated tungsten electrode.

Scoring, line by line

Each pick is scored on performance, build, value, safety listing and warranty. Collets here state no safety listing, so the safety criterion adds nothing for any pick here; the ranking comes from the remaining criteria. No listing here states a warranty term either. How We Pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
RIVERWELD 46pc Kit 9.5 32 21 22 0 0
GZTIGWELD 10N24 Kit 9.5 29 21 20 0 0
RIVERWELD 9pc Jumbo 9.4 28 20 20 0 0
Mtsooning 10pc 3/32 9.4 27 20 20 0 0
Mtsooning 10pc 1/8 9.3 26 19 19 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides