Best Tape Measure with Fractions (2026): 5 Picks for the Shop
Five 25 ft tape measures with fraction markings compared by accuracy, standout, lock and hook, from a WORKPRO pink tape to a reverse-read FastCap.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWORKPRO 25FT Pink9.6/10View on Amazon - 2
Best LockingWORKPRO 25-FT 3-Brake9.6/10View on Amazon - 3
Best ReadabilityCRAFTSMAN CMHT37443S9.6/10View on Amazon - 4
Best Reverse ReadingFastCap ProCarpenter9.5/10View on Amazon
A cut lands where the mark lands, and a tape that prints fractions in plain sight saves a recheck and a spoiled board. This guide looks at the best tape measure with fractions for shop and site work, comparing tapes by fraction markings, accuracy, standout, lock and hook, from a pink WORKPRO to a reverse-read FastCap.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall WORKPRO 25FT Pink: 1/8 fractions with 1/32 accuracy, magnetic hook and 7.2 ft standout. Check price on Amazon
- Best Locking WORKPRO 25-FT 3-Brake: Three brakes, fractions and 1/32 accuracy with a magnetic hook. Check price on Amazon
- Best Readability CRAFTSMAN CMHT37443S: Fractions in alternating colors and heights with 13 ft reach. Check price on Amazon
- Best Reverse Reading FastCap ProCarpenter: Reverse scale reads from right or left, with 1/16 inch markings. Check price on Amazon
The machines

WORKPRO 25FT Pink Tape Measure
A 25 ft pink tape with 1/8 inch fraction markings, 1/32 inch accuracy, a 1 inch wide nylon-coated blade, a magnetic hook and a thumb lock.
Pros
- 1/8 inch markings with 1/32 inch accuracy
- Blade stands out 7.2 feet without bending
- Magnetic hook and thumb lock
- Nylon coating resists rust and wear
Cons
- No warranty term is stated
- Pink color only on this listing
- Magnet only grips metal surfaces
- Only a 25 ft length is offered

WORKPRO 25-FT Tape Measure with Fractions
A 25 ft pink tape with fractions printed on the blade, 1/32 inch accuracy, three brakes, a magnetic hook and a nylon-coated blade.
Pros
- Three brakes: thumb lock and two finger brakes
- Fractions printed on the blade with 1/32 inch accuracy
- Magnetic hook and nylon-coated blade
- Passes a 1.5m drop
Cons
- No warranty term is stated
- Pink color only on this listing
- Magnet only grips metal surfaces
- Only a 25 ft length is offered

CRAFTSMAN 25-Ft Tape Measure with Fraction
A 25 ft tape with fractions printed in alternating colors and heights, a manual-locking blade, 13 ft of reach and a rubber overmold.
Pros
- Fractions in alternating colors and heights
- 13 ft of reach for solo measuring
- Manual-locking blade with rubber overmold
- Compact size fits a tool belt
Cons
- Manual lock, not self-locking
- Only a 25 ft length is offered
- Black and red color only
- Reach is 13 ft, not the full blade length

FastCap ProCarpenter Standard Reverse Measuring
A 25 ft reverse-reading tape with 1/16 inch markings, a 1 inch wide blade, a four-rivet nose clip, a built-in notepad and a pencil sharpener.
Pros
- Reads from right or left hand
- Markings down to 1/16 inch
- Built-in notepad and pencil sharpener
- Four-rivet nose clip and rubber boot
Cons
- Markings only to 1/16 inch, coarser than 1/32 inch
- Black color only
- Only a 25 ft length is offered
- Reverse scale reads opposite to a standard tape

CRAFTSMAN 25-Ft Tape Measure with Fraction
A 25 ft tape with fractions printed on the blade, a self-locking blade and a rubber overmold for grip.
Pros
- Fractions printed on the blade
- Self-locking blade
- Rubber overmold for added grip
- Compact size at 5.75 x 3.5 inches
Cons
- Red and black color only
- Only a 25 ft length is offered
- Self-locking only, no manual lock
- No thumb brake to slow retraction
Other welders and gear to compare
DEWALT Atomic Compact Series 30 ft. Tape MeasureCheck price on Amazon
Spec Ops Elite Heavy Duty Tape MeasureCheck price on Amazon
DEWALT Atomic Compact Series 16 ft. Tape MeasureCheck price on Amazon
DEWALT Atomic Compact Series 25 ft. Tape MeasureCheck price on Amazon
CRAFTSMAN 30-ft Tape Measure with Fraction MarkingsCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Length | Fractions | Blade width | Standout / Reach | Lock | Warranty (stated) |
|---|---|---|---|---|---|---|---|
| WORKPRO 25FT Pink | 9.6/10 | 25 ft | 1/8 in, 1/32 in accuracy | 1 in | 7.2 ft standout | Thumb lock | Not stated |
| WORKPRO 25-FT 3-Brake | 9.6/10 | 25 ft | Fractions, 1/32 in accuracy | Not stated | Not stated | 3 brakes | Not stated |
| CRAFTSMAN CMHT37443S | 9.6/10 | 25 ft | Fractions, alternating colors | Not stated | 13 ft reach | Manual lock | Not stated |
| FastCap ProCarpenter | 9.5/10 | 25 ft | 1/16 in increments | 1 in | Not stated | Not stated | Not stated |
| CRAFTSMAN CMHT37225 | 9.5/10 | 25 ft | Fractions printed | Not stated | Not stated | Self-locking | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (19 November 2026).
Buying guide: the best tape measure with fractions
Fraction markings
Fractions are the point of this guide. The WORKPRO pink tape prints markings every 1/8 inch with 1/32 inch accuracy, and the WORKPRO 3-brake tape prints fractions with 1/32 inch accuracy. The CRAFTSMAN CMHT37443S prints fractions in alternating colors and heights for quick reads, and the CRAFTSMAN CMHT37225 prints fractions on the blade. The FastCap marks down to 1/16 inch increments and reads from the right or the left. Finer markings help when the cut has to land on a sixteenth or a thirty-second, so match the markings to the work.
Standout and reach
Standout is how far the blade holds straight before it folds. The WORKPRO pink tape stands out 7.2 feet without bending, and the CRAFTSMAN CMHT37443S gives 13 ft of reach for measuring alone. The WORKPRO 3-brake, FastCap and CRAFTSMAN CMHT37225 listings state no standout or reach figure, so the blade length is the only reach figure they give: all five run 25 ft. Long standout matters when you measure alone across a sheet or a room; without it, the blade folds and the mark moves.
Lock and hook
A lock holds the blade while you mark, and a hook holds the end while you pull. The WORKPRO pink tape has a thumb lock and a magnetic hook, and the WORKPRO 3-brake tape has three brakes: a thumb lock, a side finger brake and a bottom finger brake, plus a magnetic hook. The CRAFTSMAN CMHT37443S has a manual-locking blade, and the CRAFTSMAN CMHT37225 has a self-locking blade. The FastCap states no lock; it has a four-rivet nose clip and a belt clip instead. The thumb lock on the pink WORKPRO also slows blade retraction to prevent accidental injury.
Blade and coating
Blade width and coating decide how the tape survives the shop. The WORKPRO pink tape has a 1 inch wide blade, 0.0047 inch thick, with a nylon coating that prevents rust and wear. The WORKPRO 3-brake tape has a nylon-coated blade with a rubber overmold. The FastCap has a 1 inch wide blade with a heavy-duty rubber boot. The CRAFTSMAN tapes have rubber overmold grips; the CMHT37443S is a compact tape that fits a tool belt, and the CMHT37225 measures 5.75 x 3.5 inches.
A tape with fractions earns its keep when the markings read fast and the blade holds straight. For the full read on tape markings, see measuring tape measurements, and for a smaller tape, see the best compact tape measure. Layout work pairs with a square: see the best combination square set and the best machinist square.
Use as directed. Keep fingers clear of the blade as it retracts, and lock the blade before the tape goes back in a pocket or a tool belt. The thumb lock on the pink WORKPRO slows retraction to prevent accidental injury. Hook the end on the work before pulling the blade out, and wipe the blade clean before it retracts so grit does not wear the markings.
Before You Strike an Arc
- Check the fraction markings read clearly along the whole blade before the first cut.
- Seat the hook on the work and set the lock before marking a measurement.
- Check the blade retracts smoothly and the lock holds before measuring alone.
- Keep the blade dry and clean so the markings stay readable.
FAQ for welders
How do I read a tape measure with fractions?
Fractions are printed on the blade: the WORKPRO pink tape marks every 1/8 inch with 1/32 inch accuracy, and the CRAFTSMAN CMHT37443S prints fractions in alternating colors and heights. The FastCap marks down to 1/16 inch increments. Read the largest fraction mark at the edge of the work, then count the smaller marks to the exact line.
How long is a standard measuring tape?
All five tapes here run 25 ft. That length covers a full room span from one end, and the tape still fits a tool belt.
Is a tape measure accurate for height?
These tapes mark to 1/32 inch on the WORKPRO tapes and 1/16 inch on the FastCap, and all five run 25 ft, so the blade covers a full height reading. Hold the hook at the floor and read the mark at the top of the head.
What does the magnetic hook do?
The magnetic hook holds the end of the tape on metal surfaces, so the blade stays put while you pull it out. The WORKPRO pink tape and the WORKPRO 3-brake tape both have a magnetic hook. On wood or other non-metal surfaces, the hook still catches the edge of the work.
Related: measuring tape measurements, best compact tape measure, best combination square set, and the measuring and layout hub. Also see the best machinist square. Also see the uses for a combination square. Also see the weld size gauge.
Scoring, line by line
Each tape is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Tape measures have no safety listing to state and none of these listings states a warranty term, so every tape here scores zero on safety and warranty; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| WORKPRO 25FT Pink | 9.6 | 30 | 21 | 21 | n/a | 0 |
| WORKPRO 25-FT 3-Brake | 9.6 | 29 | 21 | 21 | n/a | 0 |
| CRAFTSMAN CMHT37443S | 9.6 | 28 | 20 | 20 | n/a | 0 |
| FastCap ProCarpenter | 9.5 | 27 | 20 | 20 | n/a | 0 |
| CRAFTSMAN CMHT37225 | 9.5 | 26 | 19 | 20 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




