Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Sand Blast Cabinet (2026): 4 Picks for Rust, Paint and Restoration

Four sand blast cabinets from 25 to 90 gallons, compared on media capacity, working pressure, air use, visibility and the warranty each listing states.

Best Sand Blast Cabinet (2026): 4 Picks for Rust, Paint and Restoration
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Eastwood B60Best OverallEastwood B609.7/10View on Amazon
  2. 2Parts-Diyer 90 GallonLargest CapacityParts-Diyer 90 Gallon9.6/10View on Amazon
  3. 3VEVOR SBC200 60 GallonBest Floor CabinetVEVOR SBC200 60 Gallon9.6/10View on Amazon
  4. 4VEVOR SBC90 25 GallonBest BenchtopVEVOR SBC90 25 Gallon9.5/10View on Amazon

A rusted bracket, a painted fender or a valve cover caked in old paint all ask for the same thing: a way to strip the surface clean without spending the afternoon with a wire wheel. A cabinet keeps the media and the dust inside while you work through the gloves, and the best sand blast cabinet for a home shop is the one that fits the parts you blast, the air your compressor delivers and the space you have. This guide compares the cabinets on what each listing states: capacity, working pressure, air use, media load, visibility and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Eastwood B60: A 36 by 24 by 23 inch work area, up to 120 lb of media, and the only stated warranty here, 1 year. Check price on Amazon
  • Largest Capacity Parts-Diyer 90 Gallon: A 90 gallon cabinet with four ceramic nozzles in the sizes the listing states, oversized rubber gloves and a top access door of 18.7 by 28.7 inches. Check price on Amazon
  • Best Floor Cabinet VEVOR SBC200 60 Gallon: A 60 gallon cabinet on a stand that holds up to 203.4 lb of media, runs at 5 cfm and 40 to 120 PSI, and includes 4 lens protectors. Check price on Amazon
  • Best Benchtop VEVOR SBC90 25 Gallon: A 25 gallon benchtop cabinet that holds up to 33 lb of media, with LED lighting, 4 lens protectors and an air filter. Check price on Amazon

The machines

Eastwood B60 Sand Blasting Cabinet

Eastwood B60 Sand Blasting Cabinet

Eastwood9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A steel blast cabinet with a 36 by 24 by 23 inch work area that holds up to 120 lb of abrasive media, with a V hopper, LED lighting and a 1-year limited warranty.

Pros

  • 36 by 24 by 23 inch work area fits alloy wheels up to 20 inches
  • Holds up to 120 lb of abrasive media
  • V hopper design with LED lighting over the work area
  • 1-year limited warranty and 90-day return, plus lifetime tech support

Cons

  • Working pressure and air use are not stated
  • No nozzle count or size is stated
  • No lens protectors or window films are listed as included
  • At 149.0 lb it is heavy to move and set up
VEVOR 60 Gallon Sandblasting Cabinet 40-120PSI

VEVOR 60 Gallon Sandblasting Cabinet 40-120PSI

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60 gallon steel cabinet on a stand that holds up to 203.4 lb of media, runs at 5 cfm and 40 to 120 PSI, and ships with a blasting gun and 4 ceramic nozzles.

Pros

  • Holds up to 203.4 lb of blasting media, the most here
  • Runs at 5 cfm and 40 to 120 PSI
  • LED lighting and a large acrylic window, with 4 lens protectors included
  • Cold-rolled steel with a powder-coated finish, on a stand

Cons

  • A 37.1 by 22.9 by 54.5 inch cabinet needs a fixed spot in the shop
  • No warranty term is stated
  • No grit size guidance is given for the media
  • No gloves are listed as included
Parts-Diyer 90 Gallon Sandblasting Cabinet, Blue

Parts-Diyer 90 Gallon Sandblasting Cabinet, Blue

Parts-Diyer9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 90 gallon steel cabinet with 4 ceramic nozzles in the sizes the listing states, oversized rubber gloves and a top access door of 18.7 by 28.7 inches.

Pros

  • 90 gallon capacity, the largest cabinet here
  • Four ceramic nozzles in the sizes the listing states
  • Oversized rubber gloves included for working the blast gun
  • Top access door of 18.7 by 28.7 inches, with 5 protective films for the window

Cons

  • No warranty term is stated
  • Item weight is not stated
  • Runs at 40 to 80 PSI, a narrower range than the VEVOR cabinets
  • No media load in pounds is stated
VEVOR 25 Gallon Sandblasting Cabinet

VEVOR 25 Gallon Sandblasting Cabinet

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25 gallon benchtop cabinet that holds up to 33 lb of media, runs at 5 cfm and 40 to 120 PSI, and includes a blasting gun, 4 ceramic nozzles and an air filter.

Pros

  • Benchtop size at 24.41 by 19.09 by 19.09 inches, the smallest footprint here
  • Holds up to 33 lb of media at 5 cfm and 40 to 120 PSI
  • LED lighting, large acrylic window and 4 lens protectors
  • Sealing strip, sealant and an air filter keep dust in

Cons

  • 33 lb media load is the smallest here, so refills come sooner
  • Benchtop size limits the parts that fit inside
  • No gloves are listed as included
  • Steel thickness is not stated

Spec sheet comparison

Model Gear Score Capacity Working pressure Air use Media capacity Nozzles Warranty
Eastwood B60 9.7/10 Not stated Not stated Not stated 120 lb Not stated 1 year
VEVOR SBC200 60 Gallon 9.6/10 60 gallon 40-120 PSI 5 cfm 203.4 lb 4 ceramic None stated
Parts-Diyer 90 Gallon 9.6/10 90 gallon 40-80 PSI 5 cfm Not stated 4 ceramic None stated
VEVOR SBC90 25 Gallon 9.5/10 25 gallon 40-120 PSI 5 cfm 33 lb 4 ceramic None stated

Ratings in this table are the makers’ own claims taken from each product page (19 November 2026).

How the scores work

Each cabinet is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No cabinet here states a safety standard, so every cabinet here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Eastwood B60 9.7 30 21 20 n/a 2
VEVOR SBC200 60 Gallon 9.6 29 21 21 n/a 0
Parts-Diyer 90 Gallon 9.6 28 20 20 n/a 0
VEVOR SBC90 25 Gallon 9.5 26 19 20 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

Best sand blast cabinet buying guide: what matters in a home shop

Capacity and media load

Capacity sets how long you can blast before refilling and how large a part fits. The stated capacities here run from 25 to 90 gallons, with stated media loads from 33 lb to 203.4 lb. The Eastwood states its load as 120 lb of media with a 36 by 24 by 23 inch work area, so match the work area to the parts you blast most.

Working pressure and air use

Three cabinets here state 5 cfm, the two VEVOR cabinets at 40 to 120 PSI and the Parts-Diyer at 40 to 80 PSI. The Eastwood does not state air use, so check its manual before matching it to a compressor. A cabinet that asks for more air than the compressor delivers will not hold pressure, and the blast will cut slowly.

Visibility and dust control

The VEVOR and Parts-Diyer cabinets state an acrylic or glass window with LED lighting, and the Eastwood states LED lighting over the work area. The VEVOR cabinets include 4 lens protectors and the Parts-Diyer includes 5 protective films, which keep the window clear as media hits it. Sealing strips, sealant and air filters keep dust inside the cabinet, and a supplied-air or rated respirator is still needed when blasting.

Nozzles and media

Nozzles set the blast pattern, and the Parts-Diyer is the only cabinet here that states its nozzle sizes. The VEVOR cabinets include 4 ceramic nozzles each, and the Eastwood gives no nozzle count. Listings here name glass beads, silicon sand and aluminum oxide as media, and Eastwood recommends 60 grit or finer. Do not use silica sand, and use a supplied-air or rated respirator when blasting, per the OSHA silica rule.

Size and fit in the shop

The benchtop VEVOR measures 24.41 by 19.09 by 19.09 inches and weighs 28.3 lb, while the floor-standing VEVOR measures 37.1 by 22.9 by 54.5 inches and weighs 79.37 lb. The Eastwood weighs 149.0 lb, so it needs a fixed spot and a clear path to move it in. Check the door and the work area against your largest part before ordering.

Use as directed. Wear a supplied-air or rated respirator and eye protection when blasting, never use silica sand, and keep the cabinet sealed and the work area ventilated. Check the manual for the air supply and media the maker states, keep flammable material away from the cabinet, and never exceed the stated media load. See the OSHA silica rule and the site Safety Disclaimer.

Before You Strike an Arc

  • Check the compressor first: the cabinets that state air use ask for 5 cfm, so confirm the compressor delivers it at the working pressure the listing states.
  • Fit the nozzles, gloves and lens protectors before loading media, and check the sealing strip sits flat around the door.
  • Load glass beads or aluminum oxide, the media the listings name, and leave silica sand out.
  • Check the LED lighting, the window films and the air filter on arrival, and keep spares of the lens protectors and films.
  • Keep the gloves inside the cabinet and the door latched while blasting, and clear media from the seal before closing.

FAQ for welders

What is a blast cabinet?

A blast cabinet is a sealed box with gloves built into the front, a window to see through and a gun that sprays abrasive media at the part inside. It strips paint, rust and scale while keeping the media and dust inside the box. The cabinets here are kits with a gun, nozzles and lighting, sized from a 25 gallon benchtop to a 90 gallon floor model.

What is the best media for a blast cabinet?

It depends on the part and the finish you want, and the listings here name glass beads, silicon sand and aluminum oxide. Eastwood recommends 60 grit or finer media for its cabinet. Never use silica sand, and use a supplied-air or rated respirator when blasting.

What size blast cabinet do I need?

Match the work area to the largest part you blast. The Eastwood states a 36 by 24 by 23 inch work area, and the stated capacities here run from 25 to 90 gallons. A benchtop cabinet suits small parts, while a floor cabinet with a 90 gallon capacity suits larger work.

How much air does a blast cabinet need?

Three cabinets here state 5 cfm: the two VEVOR cabinets at 40 to 120 PSI and the Parts-Diyer at 40 to 80 PSI. The Eastwood does not state air use, so check its manual. Size the compressor to the pressure and air use the listing states.

Do I need a respirator when sandblasting?

Yes. Sandblasting needs a supplied-air or rated respirator, and silica sand must not be used, per the OSHA silica rule. The cabinets here keep dust inside with sealing strips and filters, but that does not replace respiratory protection.

Related: metal finishing hub, sandblasting hub, best air compressor for sandblasting, best sandblasting gun, and glass bead blasting media size chart.

More buying guides