Best Lever Hoist (2026): 5 Come Alongs Compared
Five lever hoists from 1/4 ton to 3 tons compared on rated capacity, lift, chain, brake, weight, and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJET JLP-050A-59.8/10View on Amazon - 2
Best Heavy CapacityVEVOR 3T Lever Hoist9.6/10View on Amazon - 3
Best 1-TonVEVOR 1T Lever Hoist9.6/10View on Amazon - 4
Best 3-Ton Come AlongYELLOW JACKET 3 Ton9.5/10View on Amazon - 5
Best CompactFITHOIST 1/4 Ton Hoist9.5/10View on Amazon
A lever hoist earns its keep when a beam needs nudging into place, a load needs tensioning, or a machine needs inching across a shop floor. The best lever hoist pulls and lifts with a brake that holds, a chain that runs free in neutral, and hooks that swivel without twisting the chain. This roundup compares the lever hoists below by rated capacity, lift, chain, brake, and the warranty each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall JET JLP-050A-5: Checked to 125% of rated capacity, ANSI/ASME B30.21, lifetime warranty Check price on Amazon
- Best Heavy Capacity VEVOR 3T Lever Hoist: 3T capacity with 10 mm G80 chain and dual pawl brake Check price on Amazon
- Best 1-Ton VEVOR 1T Lever Hoist: 1T capacity, 10 ft lift, G80 chain, dual pawl brake Check price on Amazon
- Best 3-Ton Come Along YELLOW JACKET 3 Ton: 3-ton capacity with Weston double-pawl brake and G80 chain Check price on Amazon
- Best Compact FITHOIST 1/4 Ton Hoist: 1/4 ton mini hoist with storage bag for garages Check price on Amazon
The machines

JET 1/2-Ton Mini-Puller Lever Hoist
A 1/2-ton mini-puller with a 5 ft lift, Grade 80 alloy chain, an enclosed Weston brake with a wear indicator, and a limited lifetime warranty.
Pros
- Checked to 125% of rated capacity, with a certificate in the box
- ANSI/ASME B30.21 and HST-3 compliance is stated
- Enclosed Weston brake with two pawls and a wear indicator
- Alloy steel hooks swivel 360° and close with cast-steel safety latches
Cons
- 1,000 lb capacity suits lighter loads than the 1-ton and 3-ton picks
- 5 ft lift is less than the 10 ft lift on the other picks
- No storage case is included
- 10-1/16 in headroom needs room above the load to rig

VEVOR Manual Lever Chain Hoist
A 3T lever hoist with a 10 ft lift, 10 mm G80 alloy chain, a Weston dual pawl brake, and 360° rotating hooks.
Pros
- Highest rated capacity here at 3T (6,600 lb)
- 10 mm G80 alloy chain, galvanized for corrosion resistance
- Weston dual pawl brake for precise control
- 360° rotating handle and 360° swivel hook for multi-angle use
Cons
- No warranty term is stated
- 46.63 lb weight is the heaviest here
- No brake wear indicator is stated
- 20.5 in length is the longest here

VEVOR Manual Lever Chain Hoist
A 1T lever hoist with a 10 ft lift, 6 mm G80 alloy chain, a Weston dual pawl brake, and 360° rotating hooks.
Pros
- 1T capacity with a 10 ft lift on G80 alloy chain
- 6 mm G80 alloy chain, galvanized for corrosion resistance
- Weston dual pawl brake for precise control
- 360° rotating handle and 360° swivel hook for multi-angle use
Cons
- No warranty term is stated
- 16.76 lb weight is heavier than the JET and FITHOIST picks
- No brake wear indicator is stated
- No headroom figure is stated

YELLOW JACKET 3 Ton Manual Lever Chain Hoist
A 3-ton manual lever chain hoist with a 10 ft lift, G80 galvanized manganese steel chain, and a Weston double-pawl brake.
Pros
- 3-ton lifting capacity
- G80 manganese steel chain, galvanized for corrosion resistance
- Weston double-pawl brake spreads the load across two gears
- 360° rotation for easy hoisting
Cons
- No weight is stated
- No chain thickness is stated
- No dimensions are stated
- No safety latch is stated for the hooks

FITHOIST Mini Chain Hoist 1/4 ton 550Lbs Capacity
A 1/4-ton mini chain hoist with a 10 ft lift, G80 chain, 2 heavy duty hooks, and a storage bag.
Pros
- Compact, lightweight design for narrow spaces with no power supply
- Storage bag included for easy carry
- Non-slip rubber handle for a steady hold
- Single step reduction gear for load holding, with a chain guide for smooth, quiet guiding
Cons
- 1/4-ton capacity is the lowest here
- No chain thickness is stated
- No dimensions are stated
- No safety latch is stated for the hooks
Spec sheet comparison
| Hoist | Gear Score | Capacity | Lift | Chain | Weight | Brake | Warranty |
|---|---|---|---|---|---|---|---|
| JET JLP-050A-5 | 9.8/10 | 1/2 ton (1,000 lb) | 5 ft | Grade 80 alloy, 4.3 x 12 mm | 5.2 lb | Weston, 2 pawls | Lifetime |
| VEVOR 3T Lever Hoist | 9.6/10 | 3T (6,600 lb) | 10 ft | G80 alloy, 10 mm | 46.63 lb | Weston dual pawl | Not stated |
| VEVOR 1T Lever Hoist | 9.6/10 | 1T (2,200 lb) | 10 ft | G80 alloy, 6 mm | 16.76 lb | Weston dual pawl | Not stated |
| YELLOW JACKET 3 Ton | 9.5/10 | 3 tons | 10 ft | G80 manganese steel | Not stated | Weston double-pawl | Not stated |
| FITHOIST 1/4 Ton Hoist | 9.5/10 | 1/4 ton (550 lb) | 10 ft | G80 alloy steel | 6.44 lb | Single step reduction gear | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026.
Buying guide: how to choose the best lever hoist
Capacity and lift
Capacity is the first number to match to the job. The picks here run from 1/4 ton (550 lb) to 3T (6,600 lb), with the JET at 1/2 ton (1,000 lb) and the VEVOR 1T at 2,200 lb in between. Lift runs from 5 ft on the JET to 10 ft on the other four. Quote the rated capacity exactly as listed and never exceed it, and never lift people or loads over people.
Chain and hooks
Every pick here states Grade 80 or G80 alloy chain. The JET states 4.3 x 12 mm chain, single fall; the VEVOR 1T states 6 mm chain and the VEVOR 3T states 10 mm chain, both galvanized for corrosion resistance. Hooks matter as much as chain: the JET hooks swivel 360°, stretch slowly to warn of overload, and close with cast-steel safety latches, while the VEVOR hooks swivel 360° for multi-angle use. The FITHOIST includes 2 heavy duty hooks.
Brake and selector
The brake holds the load when the lever stops. The JET uses a fully enclosed Weston-style automatic brake with two pawls that split the load across opposite sides of the ratchet gear, plus a brake wear indicator on the handwheel. The VEVOR hoists and the YELLOW JACKET use a Weston dual pawl brake, and the FITHOIST uses a single step reduction gear for load holding. A three-position selector switches between lifting, neutral, and lowering; the JET selector free-wheels the chain in neutral.
Weight and headroom
Hoist weight decides how far it travels in a tool bag. The JET weighs 5.2 lb, the FITHOIST 6.44 lb, the VEVOR 1T 16.76 lb, and the VEVOR 3T 46.63 lb; the YELLOW JACKET does not state a weight. Headroom matters when rigging under a beam: the JET states 10-1/16 in of headroom, and no other pick states a headroom figure. A lighter hoist suits carry work, while a heavier one stays put on a fixed rig.
Use as directed. Never exceed the stated rated capacity, and never lift people or loads over people. Keep the work area clear, check the brake and hooks before each lift, and store the chain clean and dry. See the Safety Disclaimer.
Before You Strike an Arc
- Check the brake wear indicator on the JET handwheel and confirm the friction discs are in service before lifting.
- Run the selector through Up, Neutral, and Down, and confirm the chain free-wheels in neutral.
- Check that the hooks seat fully and swivel freely before rigging a load.
- Match the chain to the job: Grade 80 or G80 chain is stated on every pick here.
- Keep the JET load certificate and manual with the hoist.
FAQ for welders
How to use a lever hoist?
Set the selector to Neutral and pull the chain through to reach the load, then set it to Up and work the lever to lift. Attach both hooks, keep the load below the stated rated capacity, and lower with the selector on Down. Never lift people or loads over people.
What capacity should a lever hoist have?
Match the hoist to the heaviest load it will move, and never exceed the stated rated capacity. The picks here run from 1/4 ton (550 lb) to 3T (6,600 lb), so a 1/2-ton JET at 1,000 lb suits lighter rigging while the 3-ton picks suit beams and machinery.
What does a Weston brake do on a lever hoist?
A Weston brake holds the load when the lever stops moving. The JET brake uses two pawls that split the load across opposite sides of the ratchet gear, and the VEVOR and YELLOW JACKET hoists use a dual pawl brake. The JET handwheel also carries a brake wear indicator that shows when the friction discs need service.
What is G80 chain?
G80 is the chain grade the listings state: the VEVOR, FITHOIST, and YELLOW JACKET hoists list G80 alloy chain, and the JET lists Grade 80 alloy chain. The VEVOR 3T states a 10 mm chain, the VEVOR 1T states a 6 mm chain, and the JET states 4.3 x 12 mm chain.
Can a lever hoist lift people?
No. The JET listing states the hoist is for lifting and pulling loads up to 1,000 lb, never people, and never lift loads over people. Use a hoist only for loads within its stated rated capacity.
Related: manual chain hoist, lever hoist vs chain hoist, best lever chain hoist, best 4 ton come along, and the hoists and lifting hub. Also see best 2 ton engine hoist. Also see electric hoist vs come along. Also see parts of a chain hoist. Also see best shop crane hoist. Also see come along vs winch. Also see lifting and pressing.
Scoring, line by line
Each hoist is scored out of 10 on performance, build, value, safety, and warranty; the weights are published on the How We Pick page. For lever hoists, safety means a stated brake design, safety latches, and a stated standard such as ANSI/ASME B30.21. Only the JET states a warranty, a limited lifetime term, so the other four score zero on warranty and the ranking comes from the other four criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| JET JLP-050A-5 | 9.8 | 33 | 24 | 21 | 9 | 4 |
| VEVOR 3T Lever Hoist | 9.6 | 30 | 21 | 21 | 7 | 0 |
| VEVOR 1T Lever Hoist | 9.6 | 29 | 21 | 21 | 7 | 0 |
| YELLOW JACKET 3 Ton | 9.5 | 28 | 19 | 20 | 7 | 0 |
| FITHOIST 1/4 Ton Hoist | 9.5 | 26 | 19 | 20 | 5 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




