Best Large Bore Air Gauge (2026): 4 Gauges Compared
Four large bore air gauges compared by pressure range, head type, swivel, body material and warranty, for large trucks, tractors and heavy equipment.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallRhino USA Inflator Gauge9.6/10View on Amazon - 2
Best Large BoreGODESON Large Bore Gauge9.6/10View on Amazon - 3
Best Two-PackGODESON Dual Head 2-Pack9.6/10View on Amazon - 4
Best Brass BodyMEASUREMAN Large Bore Dual Head9.6/10View on Amazon
A truck tire that reads low on the gauge means a slow leak or a long haul on soft rubber, and the wrong chuck will not seat on a large bore valve at all. The best large bore air gauge is the one that fits the valve, reads the range you run, and holds up in the shop. This guide compares four gauges on pressure range, head type, swivel, body material and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Rhino USA Inflator Gauge: 0-200 PSI digital gauge with inflator, bleed valve and lifetime replacement Check price on Amazon
- Best Large Bore GODESON Large Bore Gauge: Large bore fitting, 360 degree swivel, 10-150 PSI in 2 PSI steps, 1 year warranty Check price on Amazon
- Best Two-Pack GODESON Dual Head 2-Pack: Two dual head gauges, 10-150 PSI, zinc alloy with brass core, 1 year warranty Check price on Amazon
- Best Brass Body MEASUREMAN Large Bore Dual Head: Solid brass body, dual head, 360 degree swivel, accuracy of 1 increment Check price on Amazon
The machines

Rhino USA Digital Tire Pressure Gauge
A digital tire pressure gauge with an inflator, a locking chuck and a bleed valve, reading 0 to 200 PSI through a 2 inch glow dial.
Pros
- Inflates, checks and bleeds pressure in one tool
- Widest range here at 0 to 200 PSI, with a large 2 inch glow dial
- Braided stainless hose with solid brass hardware and a locking chuck
- Lifetime replacement is stated
Cons
- Heavier than the pencil gauges at 1.3 lb
- Needs an NPT air compressor connection to inflate
- Single locking chuck, with no dual head for inner wheels
- Largest body here at 8.0 by 4.0 by 3.0 inches

GODESON Heavy Duty Large Bore Tire Pressure
A large bore tire pressure gauge with a 360 degree swivel foot, reading 10 to 150 PSI in 2 PSI increments.
Pros
- Large bore fitting for large trucks, tractors and heavy equipment
- 360 degree swivel foot reaches awkward tire valves
- Chrome-plated steel body with a chrome-plated copper head
- Clear 2 PSI increments across a 10 to 150 PSI range
Cons
- Longest gauge here at 13.7 inches
- Checks pressure only, with no inflator function
- No stated accuracy figure, unlike the MEASUREMAN at 1 increment
- Single head, with no dual head for inner wheels

GODESON Dual Head Tire Pressure Gauge,Heavy Duty
A pack of 2 dual head tire pressure gauges, reading 10 to 150 PSI in 2 PSI increments.
Pros
- Pack of 2, so one gauge stays in the truck and one in the shop
- Straight foot for inner wheels, 30 degree reverse chuck for outer wheels
- No battery needed, so it works in any severe environment
- Hanging ring for easy storage
Cons
- Not a large bore gauge, so it does not suit large bore valves
- Zinc alloy chuck, not the solid brass of the MEASUREMAN
- No swivel foot, so awkward valves need a straight approach
- Slide bar scale, with no glow dial for low light

MEASUREMAN Heavy Duty Large Bore Dual Head Truck
A large bore dual head truck tire gauge with a 360 degree swivel chuck and a solid brass body, reading 10 to 150 PSI.
Pros
- Large bore dual head with a 360 degree swivel chuck
- Solid brass body with an aluminum slide
- Laser marked scale, 10 to 150 PSI in 2 PSI increments, accuracy of 1 increment
- Heavy body built for heavy duty truck use
Cons
- No warranty term is stated
- Single gauge in the box, with no spare like the GODESON 2-pack
- Reads 10 to 150 PSI only, so pressures under 10 PSI are off the scale
- Laser marked slide scale, with no dial for low light
Spec sheet comparison
| Gauge | Gear Score | Range | Head | Body | Warranty |
|---|---|---|---|---|---|
| Rhino USA Inflator Gauge | 9.6/10 | 0-200 PSI | Locking chuck | Brass, braided hose | Lifetime |
| GODESON Large Bore Gauge | 9.6/10 | 10-150 PSI | 360 degree swivel | Chrome steel, copper head | 1 year |
| GODESON Dual Head 2-Pack | 9.6/10 | 10-150 PSI | Dual head | Zinc alloy, brass core | 1 year |
| MEASUREMAN Large Bore Dual Head | 9.6/10 | 10-150 PSI | Dual head, 360 degree swivel | Solid brass | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 November 2026.
Buying guide: the best large bore air gauge
Pressure range and increments
Three gauges here read 10 to 150 PSI in 2 PSI increments: both GODESON gauges and the MEASUREMAN. The Rhino reads 0 to 200 PSI, the widest range here. Match the stated range to the tires you run.
Large bore and dual heads
Large bore means a bigger valve stem, found on large trucks, tractors and heavy equipment. The GODESON large bore gauge and the MEASUREMAN state large bore use, and both add a 360 degree swivel foot or chuck for awkward valves. The GODESON dual head is not a large bore gauge, but its straight foot reaches inner wheels and its 30 degree reverse chuck reaches outer wheels.
Body material and hose
The MEASUREMAN uses a solid brass body with an aluminum slide, the GODESON large bore uses chrome-plated steel with a chrome-plated copper head, and the GODESON dual head uses a zinc alloy chuck with a solid brass core and a chrome-plated steel body. The Rhino adds a braided stainless hose with solid brass hardware and connects to a standard NPT air compressor fitting; see the best air hose coupler guide for fittings.
Digital or pencil gauge
The Rhino is the only digital gauge here, with a large 2 inch glow dial for low light reading. The other three read off a printed scale or slide bar. A digital readout is easier to read at a glance, while a pencil gauge needs no battery. Compare more measuring tools in the best measuring gauges for metalworking guide.
Warranty
Warranty terms here run from none stated on the MEASUREMAN to a lifetime replacement on the Rhino, with 1 year on both GODESON gauges. A lifetime replacement covers the gauge for as long as you own it, while a 1 year term covers the first year only. Check the stated term before you buy.
Use as directed. Check the stated pressure range against the tires you run, and never exceed the stated range of the gauge. Screw the valve caps back on after checking pressure, as the GODESON dual head listing states.
Before You Strike an Arc
- Check the chuck against the valves you run: the Rhino connects to an NPT fitting, and the GODESON large bore and MEASUREMAN gauges suit large bore valves.
- Work the 360 degree swivel on the GODESON large bore and MEASUREMAN gauges before the first use.
- Count the box on arrival: the GODESON dual head comes as a pack of 2, and the others come as one gauge each.
- Screw the valve caps back on after checking pressure, as the GODESON dual head listing states.
FAQ for welders
What is a large bore air gauge?
A large bore air gauge is a tire pressure gauge made for large bore valves on large trucks, tractors and heavy equipment. The GODESON large bore and MEASUREMAN gauges here state large bore use.
What pressure range do these gauges read?
Three gauges read 10 to 150 PSI in 2 PSI increments. The Rhino reads 0 to 200 PSI, the widest range here.
Which gauge here inflates as well as checks pressure?
The Rhino inflates, checks and bleeds in one tool, with a locking chuck and a precision bleed valve. The other three gauges check pressure only.
What is the difference between the two GODESON gauges?
The large bore GODESON has a 360 degree swivel foot for large bore valves, while the dual head GODESON comes as a pack of 2 with a straight foot and a 30 degree reverse chuck.
Which gauges here have a warranty?
The Rhino states a lifetime replacement. Both GODESON gauges state a 1 year warranty. The MEASUREMAN listing states no warranty term.
Related: measuring and layout hub, best bore gauge, best measuring gauges for metalworking, and the precision measuring hub. Also see our best telescoping bore gauge set. Also see our best air hose coupler.
Scoring, line by line
Each gauge is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Tire pressure gauges state no electrical safety listing, so every gauge here scores zero on that criterion. Three of the four state a warranty term.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Rhino USA Inflator Gauge | 9.6 | 28 | 21 | 20 | n/a | 4 |
| GODESON Large Bore Gauge | 9.6 | 30 | 21 | 21 | n/a | 2 |
| GODESON Dual Head 2-Pack | 9.6 | 26 | 19 | 21 | n/a | 2 |
| MEASUREMAN Large Bore Dual Head | 9.6 | 29 | 22 | 19 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




