Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Forge Hammer Set (2026): 4 Picks for the Shop

Four hammer sets with forged steel heads and fiberglass handles, compared on the hammers in the box, the weights each maker states, and what each set leaves out.

Best Forge Hammer Set (2026): 4 Picks for the Shop
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1PINOZE 6-PieceBest OverallPINOZE 6-Piece9.6/10View on Amazon
  2. 2WORKPRO 5-PieceBest 5-Piece SetWORKPRO 5-Piece9.6/10View on Amazon
  3. 3LOZAGU 5-PieceOnly Dead BlowLOZAGU 5-Piece9.6/10View on Amazon
  4. 4ELEAD 6-PieceCross Peen IncludedELEAD 6-Piece9.6/10View on Amazon

A hammer set earns its keep when every hammer in the box has a job and none of them sits unused. A sledge drives stakes and breaks concrete, a ball peen shapes sheet metal and strikes chisels, a claw hammer pulls nails, and a rubber mallet moves parts without marking them. This guide compares four sets for the best forge hammer set, and scores each one on what each maker states: the hammers in the box, the head material, the handles and the weights the maker gives.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall PINOZE 6-Piece: Six hammers including a 3lb sledge, a 16oz ball peen and two claw hammers, all with fiberglass handles. Check price on Amazon
  • Best 5-Piece Set WORKPRO 5-Piece: A 3lb sledge, a 16oz ball peen and a 16oz claw hammer, with replaceable faces on the double-faced mallet. Check price on Amazon
  • Only Dead Blow LOZAGU 5-Piece: The only set here with a 2LB dead blow hammer, plus a 16oz claw hammer and a 16oz rubber mallet. Check price on Amazon
  • Cross Peen Included ELEAD 6-Piece: The only set here with cross peen hammers, plus a 3LB sledge, a 16oz ball peen and a 600g wood split axe. Check price on Amazon

The machines

PINOZE 6-Piece Hammer Mallet Set with Fiberglass

PINOZE 6-Piece Hammer Mallet Set with Fiberglass

Pinoze9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Six hammers with forged steel heads and fiberglass handles, including a 3lb sledge, two claw hammers and two mallets.

Pros

  • Six hammers in the box, the most hammers of any set here
  • 3lb sledge, 16oz ball peen and two claw hammers cover striking, shaping and pulling nails
  • Fiberglass handles wrapped in non-slip soft TPR
  • Detachable double-faced mallet heads with a double-embedded design

Cons

  • No warranty term is stated
  • No dead blow hammer in the set
  • Set weight of 8.82 lb makes it a heavy kit to carry
  • No cross peen hammer for forge work
WORKPRO 5‑Piece Hammer Set with Forged Polished

WORKPRO 5‑Piece Hammer Set with Forged Polished

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Five hammers with forged polished steel heads and fiberglass handles, including a 3lb sledge and a 16oz ball peen.

Pros

  • 3lb sledge, 16oz ball peen and 16oz claw hammer cover heavy striking and shaping
  • Fiberglass handles reduce vibration and shock transfer
  • Double-faced mallet has replaceable heads and a double-embedded design
  • Storage hole at the end of the handle for hanging storage

Cons

  • No warranty term is stated
  • Five pieces, one fewer hammer than the two 6-piece sets
  • No dead blow hammer in the set
  • No cross peen hammer for forge work
LOZAGU 5PCS Hammer Set with Dead Blow

LOZAGU 5PCS Hammer Set with Dead Blow

LOZAGU9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Five hammers with forged polished steel heads and fiberglass handles, including a 2LB dead blow hammer with no rebound.

Pros

  • 2LB dead blow hammer with a steel ball and shock-absorbing design, without rebound impact
  • Forged hardened steel heads, polished, on the claw and small hammers
  • Fiberglass handles suppress impact vibration
  • 35mm double-faced soft mallet protects tile and other surfaces

Cons

  • No sledge hammer in the set
  • No ball peen hammer for shaping sheet metal
  • No cross peen hammer for forge work
  • Heaviest hammer is the 2LB dead blow, lighter than the 3lb sledges here
ELEAD 6-Piece Mallet Hammer Set

ELEAD 6-Piece Mallet Hammer Set

ELEAD9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Six pieces with forged steel heads and fiberglass handles, including cross peen hammers, a 3LB sledge and a 600g wood split axe.

Pros

  • Cross peen hammers included, the only set here with them
  • 3LB sledge and 16oz ball peen cover heavy striking and shaping
  • Heat-treated steel heads with anti-corrosion protection
  • Fiberglass handles minimize vibration transfer

Cons

  • A 600g wood split axe takes the place of a sixth hammer
  • No claw hammer for pulling nails
  • No dead blow hammer in the set
  • Only one rubber mallet, with no double-faced soft mallet

Spec sheet comparison

Model Gear Score Pieces Sledge Ball peen Rubber mallet Handles
PINOZE 6-Piece 9.6/10 6 3lb 16oz 32oz Fiberglass
WORKPRO 5-Piece 9.6/10 5 3lb 16oz 32oz Fiberglass
LOZAGU 5-Piece 9.6/10 5 None None 16oz Fiberglass
ELEAD 6-Piece 9.6/10 6 3LB 16oz 32oz Fiberglass

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 November 2026.

Buying guide: choosing the best forge hammer set

Count the hammers, not the pieces

Piece counts hide what is really in the box. The PINOZE set has six hammers, the most hammers of any set here: a 3lb sledge, a 16oz ball peen, a 16oz claw hammer, an 8oz claw hammer, a 32oz rubber mallet and a 22oz double-faced mallet. The ELEAD set has six pieces too, but one of them is a 600g wood split axe, so it holds five hammers. The WORKPRO and LOZAGU sets have five pieces each. A set with a sledge, a ball peen and a claw hammer covers the common shop jobs; a set without one of those three leaves a gap you will feel on the first job.

Hammer weights

The sledges in these sets weigh 3lb, and the dead blow hammer in the LOZAGU set weighs 2LB. The claw hammers weigh 16oz and 8oz, the rubber mallets weigh 32oz and 16oz, and the double-faced mallets in the WORKPRO and PINOZE sets weigh 22oz each. The ELEAD axe weighs 600g. As whole sets, the LOZAGU set weighs 6.61 lb and the PINOZE set weighs 8.82 lb. Heavier heads hit harder with less swing, while lighter heads give more control on small work, so match the head weight to the job, not to the size of the set.

Heads and handles

Every set here uses fiberglass handles, which reduce vibration and shock transfer. The PINOZE handles add a non-slip soft TPR wrap, and the WORKPRO handles add a non-slip grip with a storage hole at the end. The steel heads are forged in all four sets: forged hardened steel on the LOZAGU claw and small hammers, forged polished steel on the WORKPRO claw, ball peen and sledge, forged steel on the PINOZE claw, ball peen and sledge, and heat-treated steel on the ELEAD heads. The WORKPRO and PINOZE sledges carry a black coating for rust protection. The WORKPRO and PINOZE double-faced mallets have detachable heads, so a worn face can be replaced instead of the whole mallet.

What each set leaves out

No set here has everything. The LOZAGU set has no sledge, no ball peen and no cross peen hammer, so it cannot do heavy striking or shaping. The ELEAD set has no claw hammer and no double-faced soft mallet, so it cannot pull nails or strike soft surfaces without marking them. The WORKPRO set has no dead blow hammer and no cross peen hammer. The PINOZE set has no dead blow hammer and no cross peen hammer either. Read the piece list before you buy, and pick the set whose gaps you can live with.

Use as directed. Wear eye protection when striking steel, check that each head sits tight on its handle before use, and replace a hammer with a cracked handle or a loose head. Keep hands clear of the striking face, and strike with the face flat on the work so the head does not glance off. Store the set by the hanging holes where the maker provides them.

Before You Strike an Arc

  • Check every head is seated tight on its fiberglass handle before the first use.
  • Check the rubber and plastic mallet faces for damage before striking.
  • Keep the double-faced mallet heads seated; the WORKPRO and PINOZE sets use a double-embedded design to hold them.
  • Hang the set by the storage holes on the WORKPRO and PINOZE handles to keep the heads off the bench.

FAQ for welders

What hammer weights are in these sets?

The sledges weigh 3lb, the dead blow hammer weighs 2LB, the claw hammers weigh 16oz and 8oz, and the rubber mallets weigh 32oz and 16oz. The WORKPRO and PINOZE double-faced mallets weigh 22oz each, and the ELEAD axe weighs 600g. As whole sets, the LOZAGU set weighs 6.61 lb and the PINOZE set weighs 8.82 lb.

Which set has a dead blow hammer?

Only the LOZAGU set has one: a 2LB dead blow hammer with a steel ball and a shock-absorbing design, without rebound impact. The other three sets have no dead blow hammer. A dead blow hammer suits work where rebound would mark the surface or bounce the head back.

Do all four sets have fiberglass handles?

Yes. Every set here uses fiberglass handles. The PINOZE handles add a non-slip soft TPR wrap, and the WORKPRO handles add a non-slip grip with a storage hole at the end. Fiberglass handles reduce vibration and shock transfer, which cuts fatigue on long sessions.

What is the wood split axe for in the ELEAD set?

The ELEAD set includes a 600g wood split axe with a precision-ground blade for kindling preparation and campfire wood processing. It is the only piece in these four sets made for splitting wood rather than striking metal. If you want six hammers and no axe, the PINOZE set is the six-piece set without one.

Which set should a blacksmith start with?

Start from the hammers you will use most: a sledge for heavy striking, a ball peen for shaping, and a cross peen for forge work. The PINOZE set has the sledge and the ball peen, and the ELEAD set has the sledge, the ball peen and the cross peen hammers. The LOZAGU set is the pick if you want a dead blow hammer in the box.

Related: best blacksmith hammers, types of blacksmith hammers, dead blow hammer sizes, ball peen hammer sizes, and the blacksmithing hub. Also see our best anvil for blacksmithing.

Scoring, line by line

Each set is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Hammer sets carry no electrical safety listing, and no maker here states a warranty term, so every set here scores zero on safety and warranty; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
PINOZE 6-Piece 9.6 30 21 21 n/a 0
WORKPRO 5-Piece 9.6 29 21 21 n/a 0
LOZAGU 5-Piece 9.6 28 20 21 n/a 0
ELEAD 6-Piece 9.6 28 20 20 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides