Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Electric Furnace for Melting Ingots (2026): 5 Picks Compared

Five electric melting furnaces for ingots, compared on power, max temperature, crucible size, kit contents and the warranty each listing states.

Best Electric Furnace for Melting Ingots (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Ablecta ENWBest OverallAblecta ENW9.6/10View on Amazon
  2. 2VEVOR 3+1 KGHighest Max TempVEVOR 3+1 KG9.4/10View on Amazon
  3. 3TOAUTO TGF3000Best KitTOAUTO TGF30009.5/10View on Amazon
  4. 4TOAUTO TAF8000Best for AluminumTOAUTO TAF80009.3/10View on Amazon

A pile of scrap copper and a graphite ingot mold sit on the bench, waiting for a pour. The job is simple to describe and easy to get wrong: melt clean metal, hold it at temperature, and pour it into a mold without spatter or a cold shut. The best electric furnace for melting ingots does that work on a standard household outlet, with a PID controller holding the heat steady while the crucible comes up to temperature. This guide compares five electric furnaces on power, max temperature, crucible size, kit contents and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Ablecta ENW: 1800W with PID control to 2012°F, two graphite crucibles, a 5-in-1 ingot mold and the only 2 year warranty here. Check price on Amazon
  • Highest Max Temp VEVOR 3+1 KG: The highest max temperature here at 1150°C, with 3 kg and 1 kg ceramic crucibles and a 5-hole tray. Check price on Amazon
  • Best Kit TOAUTO TGF3000: A 7-in-1 kit with a grooved graphite crucible, ingot mold, forceps and gloves, plus a 1 year warranty. Check price on Amazon
  • Best for Aluminum TOAUTO TAF8000: An 1800W aluminum furnace with a 1L graphite crucible that holds 1000mL of liquid aluminum in one batch. Check price on Amazon

The machines

2026 ENW Electric Melting Furnace with 1KG & 3KG

2026 ENW Electric Melting Furnace with 1KG & 3KG

Ablecta9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 1800W furnace on 110V with PID control to 2012°F, two graphite crucibles, a 5-in-1 ingot mold and a 2 year warranty.

Pros

  • 1800W element with PID control up to 2012°F
  • Two graphite crucibles, 1 kg and 3 kg, plus a 5-in-1 ingot mold
  • Anti-tipping base, dual handles and a heat-insulating mesh cage
  • 2 year manufacturer warranty, the longest stated here

Cons

  • No melt time stated, so pour timing is not given
  • At 17 inches tall it needs more bench height than the others here
  • The 1 kg crucible suits small batches only
  • No crucible tray is listed in the kit
PYY Electric Melting Furnace

PYY Electric Melting Furnace

PYY9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1650W furnace rated to 2100°F that melts in 40 to 50 minutes, with a 3 kg crucible, a 1000g mold and a 1 year warranty.

Pros

  • 1650W element rated to 2100°F
  • Melts in 40 to 50 minutes, per the listing
  • 3 kg graphite crucible with a 1000g ingot mold in the box
  • Ceramic honeycomb insulation board protects the bench

Cons

  • Single 3 kg crucible, no smaller size for jewelry batches
  • 1650W is less power than the two 1800W furnaces here
  • No mesh cage around the body
  • 1 year warranty is shorter than the 2 year term on the Ablecta
TOAUTO 3KG Gold Melting Furnace TGF3000 1400W

TOAUTO 3KG Gold Melting Furnace TGF3000 1400W

TOAUTO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1400W furnace on 110V with a 3 kg graphite crucible, PID control to 2000°F, a 7-in-1 kit and a 1 year warranty.

Pros

  • 7-in-1 kit: furnace, crucible, ingot mold, forceps, gloves, cord and manual
  • PID control monitors chamber temperature at 2 second intervals
  • Grooved graphite crucible lifts out easily, per the maker
  • 1 year warranty with lifetime technical support

Cons

  • 1400W is less power than the 1650W and 1800W furnaces here
  • 2000°F max is the second lowest here
  • Only one crucible size, 3 kg
  • Ships with forceps rather than crucible tongs
VEVOR 3+1 KG Electric Melting Furnace 1350W

VEVOR 3+1 KG Electric Melting Furnace 1350W

VEVOR9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1350W furnace with the highest max temperature here, 1150°C, two ceramic crucibles, a 5-hole tray and a mesh face shield, with no warranty stated.

Pros

  • Highest max temperature here at 1150°C / 2102°F
  • Two ceramic crucibles, 3 kg and 1 kg, plus a 5-hole crucible tray
  • Mesh face shield, operable lid and non-slip pads
  • PID digital system with a 4-button panel and LED display

Cons

  • No warranty term is stated
  • 1350W is the lowest power here
  • Ceramic crucibles, not graphite like the other picks here
  • Melts in 40 to 55 minutes, the widest stated range here
TOAUTO 8KG PID Electric Aluminum Melting Furnace

TOAUTO 8KG PID Electric Aluminum Melting Furnace

TOAUTO9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 1800W furnace built for aluminum, with a 1L graphite crucible, PID control to 999°C and a 110V plug, with no warranty stated.

Pros

  • 1800W element with PID control to 999°C
  • 1L graphite crucible holds 1000mL of liquid aluminum in one batch
  • 110V plug-and-play, no special wiring
  • 16.5 lb body moves around the garage or workshop

Cons

  • No warranty term is stated
  • 999°C max is the lowest here, so it suits aluminum best
  • 60 to 70 minutes to reach 999°C, the slowest heat-up here
  • Only one crucible size, with no ingot mold in the box

Spec sheet comparison

Model Gear Score Power Max temp Crucible Melt time Warranty
Ablecta ENW 9.6/10 1800W 2012°F 1 kg + 3 kg graphite Not stated 2 years
PYY EMF-1500-3K-S 9.5/10 1650W 2100°F 3 kg graphite 40-50 min 1 year
TOAUTO TGF3000 9.5/10 1400W 2000°F 3 kg graphite 40-48 min 1 year
VEVOR 3+1 KG 9.4/10 1350W 2102°F 3 kg + 1 kg ceramic 40-55 min None stated
TOAUTO TAF8000 9.3/10 1800W 1830°F 1L graphite 60-70 min None stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 November 2026.

How the Gear Score works

Each furnace is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety certification, so every furnace scores zero there; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Ablecta ENW 9.6 30 21 21 0 4
PYY EMF-1500-3K-S 9.5 29 20 21 0 3
TOAUTO TGF3000 9.5 28 20 20 0 3
VEVOR 3+1 KG 9.4 29 20 20 0 0
TOAUTO TAF8000 9.3 24 19 19 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

Buying guide: best electric furnace for melting ingots

Power and max temperature

Power sets how fast the chamber climbs, and max temperature sets which metals the furnace can melt. Power here runs from 1350W to 1800W, and max temperature runs from 999°C on the aluminum furnace to 1150°C on the VEVOR. The two 1800W furnaces sit at opposite ends of that range, so watts alone do not tell the story. Match the max temperature to the metal in the crucible.

Crucible size

Crucible size sets the batch. Four furnaces here ship with a 3 kg crucible, and two add a second size: the Ablecta pairs a 1 kg graphite crucible with a 3 kg one, and the VEVOR pairs a 1 kg ceramic crucible with a 3 kg one. The TOAUTO TAF8000 takes a different path with a 1L graphite crucible that holds 1000mL of liquid aluminum, which suits one metal and one batch size. Check what sizes ship with the furnace before ordering, since a spare crucible in the box covers a cracked one.

Kit contents

The kit in the box decides how soon the first pour happens. The TOAUTO TGF3000 ships the fullest kit here, a 7-in-1 set with a graphite ingot mold, forceps, high-temperature gloves, a power cord and a manual. The Ablecta kit includes a 5-in-1 graphite ingot mold, and the VEVOR kit adds a 5-hole crucible tray for its two crucibles. The PYY kit adds a ceramic honeycomb insulation board that protects the bench. The TAF8000 ships the leanest kit, a crucible, tongs, gloves and a manual, with no ingot mold in the box.

Warranty

Warranty terms split this group. The Ablecta carries a 2 year manufacturer warranty, the longest stated term here, while the TOAUTO TGF3000 and the PYY each state 1 year. The VEVOR and the TOAUTO TAF8000 state no warranty term, so a fault after delivery is a talk with the seller rather than a claim on a written term. A longer stated term does not change how the furnace melts, but it says something about how the maker stands behind the element and the controller.

Use as directed. Melt outdoors or with strong ventilation, and use dry tools and molds only, since damp metal can spit molten metal back at the pourer. Wear a full face shield and leather PPE, keep a fire extinguisher within reach, and never melt unknown or sealed scrap. Keep the area around the furnace clear of anything that can burn. See our Safety Disclaimer.

Before You Strike an Arc

  • Confirm the outlet matches the 110V supply stated on the listing before the first heat.
  • Check the crucible, tongs and gloves are in the box, and that the crucible sits level in the chamber.
  • Dry the mold and tools before the pour, and set the ingot mold on a flat, heat-proof surface.
  • Look the lid, handles and mesh cage over on arrival before the first heat.
  • Set the furnace outdoors or under strong ventilation, away from anything that can burn.

FAQ for welders

What size electric furnace do I need for melting ingots?

Match the crucible to the batch. Four furnaces here ship with a 3 kg crucible, while the Ablecta and the VEVOR add a 1 kg crucible for smaller batches. The TOAUTO TAF8000 uses a 1L graphite crucible that holds 1000mL of liquid aluminum. Pick the crucible size first, then check the max temperature against the metal.

Can an electric furnace melt copper and silver?

It depends on the max temperature the listing states. The TOAUTO TGF3000, the PYY and the VEVOR list gold, silver and copper among the metals they melt, with max temperatures from 2000°F to 2102°F. The TOAUTO TAF8000 is rated for aluminum and metals below 1000°C, so it is the wrong pick for higher melting metals. Check the metal list on the listing before ordering.

How long does an electric furnace take to melt metal?

The listings here state 40 to 48 minutes for the TOAUTO TGF3000, 40 to 50 minutes for the PYY, and 40 to 55 minutes for the VEVOR. The TOAUTO TAF8000 states 60 to 70 minutes to reach 999°C. The Ablecta states no melt time, so its pour timing is not given.

What comes in the box with an electric melting furnace?

Every furnace here ships with at least a crucible, tongs or forceps, gloves and a manual. The TOAUTO TGF3000 ships the fullest kit, a 7-in-1 set with an ingot mold, while the Ablecta adds a 5-in-1 ingot mold and the PYY adds a ceramic honeycomb insulation board. The VEVOR adds a second crucible and a 5-hole tray.

Is 110V enough for a home melting furnace?

Every furnace here runs on 110V household power, including the two 1800W models, so no special wiring is needed, per the listings. Check the outlet and the power cord on arrival, and follow the manual for the supply the furnace needs.

Related: best metal casting furnace, electric vs propane melting furnace, best graphite crucibles, and the electric furnace ingots hub. Also see our best graphite ingot molds. Also see our best gold melting furnace.

More buying guides

MIG Welders ·

Best Grinding Disc 3 Inch (2026): 5 Picks

Five 3 inch grinding discs compared by type, grit, thickness, arbor and pack size, for cutting, grinding and finishing metal in the shop.