Best 3 X 24 Belt Sander (2026): 4 Belt Packs Compared
Four 3 x 24 inch sanding belt packs compared on grit range, grain, backing and pack size, scored from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAolabela 18 Pc9.7/10View on Amazon - 2
Most PiecesTaokyid 24 Pc9.7/10View on Amazon - 3
Washable PackSACKORANGE 20 Pc9.6/10View on Amazon - 4
Smallest PackTonmp 15 Pc9.6/10View on Amazon
A dull belt turns a quick cleanup into a long push across the bench, and a belt that loads up leaves streaks on the work. The right pack keeps fresh grit on hand for each step, from shaping an edge to smoothing a surface for finish. This guide compares the best 3 x 24 belt sander belts on grit range, grain, backing and pack size.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Aolabela 18 Pc: Six grits from 60 to 400, blue zirconia grain, and a diagonal lap splice across 18 pieces. Check price on Amazon
- Most Pieces Taokyid 24 Pc: 24 pieces with 6 each of 40, 80, 120 and 240 grit, plus wet and dry sanding. Check price on Amazon
- Washable Pack SACKORANGE 20 Pc: 20 pieces, 5 each of 40, 80, 120 and 240 grit, washable with an additive in the resin to resist loading. Check price on Amazon
- Smallest Pack Tonmp 15 Pc: 15 pieces, 5 each of 40, 80 and 120 grit, on X-weight cloth backing with a flat connection. Check price on Amazon
The machines

Aolabela 3x24 Inch Sanding Belts 18 Pcs 6 Grits
An 18 piece pack with six grits, blue zirconia grain, and a diagonal lap splice for wood, metal and stainless steel.
Pros
- Six grits from 60 to 400, the widest grit range here
- Blue zirconia grain for wood, metal, stainless steel and stone
- Diagonal lap splice with resin bonding for a smooth joint
- 3 pieces of each grit, so the pack covers rough work through fine finishing
Cons
- 18 pieces, fewer than the 24 piece Taokyid pack
- Starts at 60 grit, with no 40 grit for heavy removal
- No warranty term is stated
- Finest grit is 400, so finer work needs a different belt

Taokyid 24 PCS 3x24 Sanding Belts for Belt Sander
A 24 piece pack with 6 each of 40, 80, 120 and 240 grit, anti-clogging stearate, and wet and dry sanding.
Pros
- 24 pieces, the largest pack here
- 6 each of 40, 80, 120 and 240 grit for a full grit run
- Wet and dry sanding, the only pack here to state it
- Bi-directional tape joint with resin over resin bonding
Cons
- No 400 grit, so the finest grit here is 240
- No 150 grit between 120 and 240
- No warranty term is stated
- Aluminum oxide grain only, with no zirconia option in the pack

Sackorange 20 PCS 3 inch x 24 inch Abrasive
A 20 piece pack with 5 each of 40, 80, 120 and 240 grit, washable belts with an additive in the resin to resist loading.
Pros
- Washable belts with an additive in the resin to resist loading
- 20 pieces, 5 each of 40, 80, 120 and 240 grit
- Antistatic grain for wood, aluminum, plastic and fiberglass
- Open coat aluminum oxide grain for fast sanding
Cons
- 20 pieces, fewer than the 24 piece Taokyid pack
- Grit range ends at 240, with no 400 grit for fine finishing
- 5 pieces per grit, so heavy use of one grit runs through the pack fast
- No 150 grit between 120 and 240

Tonmp 15 PCS 3" x 24" Premium Sanding Belts
A 15 piece pack with 5 each of 40, 80 and 120 grit, open coat aluminum oxide on X-weight cloth backing.
Pros
- X-weight cloth backing for strength and toughness
- Flat connection, can be bidirectional
- Resists moisture and heat
- Anti-static and anti-clogging grain
Cons
- 15 pieces, the smallest pack here
- 3 grits only, the fewest grit choices here
- Grit range ends at 120, lower than the 240 and 400 grit tops of the other packs
- No 240 grit for the step between 120 and fine finishing
Spec sheet comparison
| Model | Gear Score | Pack | Grits | Grain | Joint / Backing | Warranty |
|---|---|---|---|---|---|---|
| Aolabela 18 Pc | 9.7/10 | 18 pcs | 60, 80, 120, 150, 240, 400 | Blue zirconia | Diagonal lap splice, resin bonding | None stated |
| Taokyid 24 Pc | 9.7/10 | 24 pcs | 40, 80, 120, 240 | Aluminum oxide | Bi-directional tape joint | None stated |
| SACKORANGE 20 Pc | 9.6/10 | 20 pcs | 40, 80, 120, 240 | Aluminum oxide | Not stated | None stated |
| Tonmp 15 Pc | 9.6/10 | 15 pcs | 40, 80, 120 | Aluminum oxide | X-weight cloth backing | None stated |
Ratings in this table are the makers’ own claims taken from each product page (21 November 2026).
How to pick the best 3 x 24 belt sander belts
Grit range
Grit range decides how much work one pack covers. The Aolabela pack runs 60, 80, 120, 150, 240 and 400 grit, 3 pieces of each, so it spans shaping through fine finishing. The Taokyid and SACKORANGE packs run 40, 80, 120 and 240 grit, with 6 pieces of each grit in the Taokyid pack and 5 in the SACKORANGE pack. The Tonmp pack runs 40, 80 and 120 grit, 5 pieces of each.
Grain: zirconia or aluminum oxide
Grain decides what the belt is made to cut. The Aolabela pack uses blue zirconia grain, and the maker lists it for wood, metal, stainless steel, cars, furniture, plastics and stone. The other three packs use premium open coat aluminum oxide grain. The Tonmp pack lists wood, aluminum, non-ferrous metal, glass, plastic and stone, while the SACKORANGE and Taokyid packs list wood, aluminum, non-ferrous metal, plastic and fiberglass.
Backing and joints
Backing and joints decide how a belt holds up on the sander. The Tonmp pack lists X-weight cloth backing with high strength and toughness, plus a flat connection that can run bidirectional. The Aolabela pack lists a diagonal lap splice with resin bonding for a smooth joint. The Taokyid pack lists a bi-directional tape joint with anti-clogging stearate and resin over resin bonding. The SACKORANGE pack lists an additive in the resin to resist loading.
Wet sanding and washable belts
Wet use and washing stretch a belt past dry sanding alone. The Taokyid pack is the only one here to state wet and dry sanding. The SACKORANGE pack states washable belts, with an additive in the resin to resist loading. The Tonmp pack states grain that resists moisture and heat. The Aolabela pack states resin bonding for heat dissipation during sanding.
Fit and pack size
Fit comes down to size, and every pack here measures 3 x 24 inch. The Taokyid pack states it fits all standard 3×24 belt sanders. Pack size runs from 15 pieces in the Tonmp pack to 24 pieces in the Taokyid pack, with 18 in the Aolabela pack and 20 in the SACKORANGE pack. More pieces per pack means fewer reorders for a shop that sands often.
Use as directed. Clamp the work before the belt touches it, wear eye and face protection, and keep guards in place on the sander. Keep gloves away from the moving belt, and keep cords clear of the work area. Check the belt joint and tracking before each session, and stop the sander before changing a belt.
Before You Strike an Arc
- Match the belt size to the sander: every pack here measures 3 x 24 inch.
- Look over the joint and the grit side for damage before fitting a fresh belt.
- Keep the grits the job needs on hand, coarse for shaping and fine for smoothing.
- Clamp the work and wear eye protection before the belt spins up.
FAQ for welders
Which grits come in these 3 x 24 packs?
The Aolabela pack holds 60, 80, 120, 150, 240 and 400 grit. The Taokyid and SACKORANGE packs hold 40, 80, 120 and 240 grit, and the Tonmp pack holds 40, 80 and 120 grit. The Aolabela pack is the only one here with 150 and 400 grit.
Do these belts fit a standard 3 x 24 belt sander?
Every pack here measures 3 x 24 inch. The Taokyid pack states it fits all standard 3×24 belt sanders. Check the size on the pack against the sander before fitting a belt.
What is the difference between the zirconia and aluminum oxide packs?
The Aolabela pack uses blue zirconia grain, while the other three packs use premium open coat aluminum oxide grain. The Aolabela maker lists zirconia for wood, metal, stainless steel, cars, furniture, plastics and stone. The aluminum oxide packs list wood, aluminum, non-ferrous metal, plastic and fiberglass, with the Tonmp pack also listing glass and stone.
Can I use these belts for wet sanding?
Only the Taokyid pack states wet and dry sanding. The SACKORANGE pack states washable belts, and the Tonmp pack states grain that resists moisture and heat. The Aolabela pack states resin bonding for heat dissipation during sanding.
How many belts come in each pack?
The Taokyid pack holds 24 pieces, the SACKORANGE pack holds 20 pieces, the Aolabela pack holds 18 pieces, and the Tonmp pack holds 15 pieces. The Taokyid pack gives 6 pieces of each grit, the SACKORANGE and Tonmp packs give 5 of each grit, and the Aolabela pack gives 3 of each grit.
Related: knife making and casting, best sanding belt for metal, best sanding belt for aluminum, ceramic vs zirconia sanding belt.
Scoring, line by line
Each belt pack is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a warranty term or a safety listing, so every pack here scores zero on those two criteria; the ranking comes from performance, build and value, led by grit range, grain and pack size.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Aolabela 18 Pc | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Taokyid 24 Pc | 9.7 | 30 | 21 | 22 | n/a | 0 |
| SACKORANGE 20 Pc | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Tonmp 15 Pc | 9.6 | 28 | 20 | 20 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




