Cold Saw for Metal: 5 Picks Scored for Clean Cuts (2026)
Five cold cut metal options compared on blade diameter, cutting capacity, motor power, speed, miter angle, and the warranty each listing states.
By WeldGearLab Editorial
Updated October 9, 2026
A dedicated cold saw for metal delivers clean, burr-free cuts that stay cool to the touch immediately after cutting, eliminating the sparks, heat, and slag produced by abrasive chop saws. For home shops, fabricators, and welders preparing joints, choosing the right cutting setup depends on motor power, blade diameter, miter angle flexibility, and electrical requirements. This guide compares five metal cutting options, from stationary chop saws to portable circular models and replacement blades, scored strictly on what each listing states.
As an Amazon Associate I earn from qualifying purchases. WeldGearLab earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall VEVOR 16-inch ZB-400G: A 16-inch 96-tooth cermet blade, 3000 W motor, dual-direction -45° to 45° miter, and a 57.8 lb carbon steel base with scale ruler. Check price on Amazon
- Longest Warranty DEWALT 14-inch D28730: A 2300 W motor, 14-inch capacity, 45-degree pivoting fence, and the only stated warranty here, a 3-year limited term. Check price on Amazon
- Best Variable Speed VEVOR 14-inch J1G-ZB-355G-3B: A 3500 W brushless motor, 10-speed adjustment from 750 to 1200 RPM, and a 14-inch stainless steel cold cut blade rated for 5.12-inch cuts. Check price on Amazon
- Best Handheld Circular Evolution S210CCS: An 8-1/4 inch portable circular saw with an 1800 W motor, 3-inch cutting depth, chip collector, and mild steel TCT blade included. Check price on Amazon
Compare the picks
| Model | Gear Score | Tool type | Blade size | Power rating | Cutting angle | Stated capacity | Warranty |
|---|---|---|---|---|---|---|---|
| VEVOR 16-inch ZB-400G | 7.8/10 | 16-inch chop saw | 16 in, 96T | 3000 W (240V) | -45° to 45° miter | 4000 cuts in Q235 rebar | None stated |
| DEWALT D28730 | 6.6/10 | 14-inch chop saw | 14 in abrasive wheel | 2300 W (120V) | 45° pivoting fence | Not stated | 3-year limited warranty |
| VEVOR 14-inch J1G-ZB-355G-3B | 6.6/10 | 14-inch chop saw | 14 in, 66T | 3500 W (240V) | 0°–45° | 5.12 in width and thickness | None stated |
| Evolution S210CCS | 6.6/10 | 8-1/4 inch circular saw | 8-1/4 in, 50T | 1800 W (AC) | 0°–45° single bevel | 3 in depth (1/2 in plate) | Limited warranty (term not stated) |
| EXFEIN EX1-RC-014105 | 5.8/10 | 14-inch saw blade | 14 in, 72T | Unpowered blade | Not stated | 50 mm rebar diameter | None stated |
Specifications are manufacturer rated, as published on each listing and collected 9 October 2026.
The picks
| Award | Product | Gear Score About the Gear ScoreThe Gear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick › | |
|---|---|---|---|
VEVOR Chop Saw 16-inch Cold Cut Blade 3000 W
|
7.8/10 | Check price on Amazon | |
DEWALT Chop Saw, 14-Inch (D28730)
|
6.6/10 | Check price on Amazon | |
VEVOR Chop Saw, 14-inch Stainless Steel Cold Cut
|
6.6/10 | Check price on Amazon | |
Evolution S210CCS Metal Cutting Circular Saw
|
6.6/10 | Check price on Amazon | |
14 Inch 72T Metal Circular Saw Blade
|
5.8/10 | Check price on Amazon |
VEVOR Chop Saw 16-inch Cold Cut Blade 3000 W
A 16-inch dry-cut chop saw with a 3000 W motor, 96-tooth cermet blade, dual-direction -45° to 45° miter base, and a heavy 57.8 lb carbon steel frame.
Pros
- Supplied with a 16-inch 96-tooth cermet-tipped blade rated for dry metal cutting
- Dual-direction miter cutting adjusts from -45° to 45°
- Heavy 57.8 lb carbon steel base with vibration-damping feet and soft-start motor
- Includes a side-mounted steel measuring scale ruler and spare carbon brushes
Cons
- Requires a 240V electrical connection, limiting portable household use
- No warranty term is stated in the listing
- Listing does not state maximum cutting thickness or blade arbor size
- Heavy 57.8 lb weight makes moving between jobsites cumbersome
DEWALT Chop Saw, 14-Inch (D28730)
A 14-inch 2300 W chop saw running on 120V with a 45-degree pivoting fence, Quick-Lock vise, and a stated 3-year limited warranty.
Pros
- Backed by a stated 3-year limited warranty
- 2300 W motor runs on standard 120V power outlets
- Quick-Lock vise and 45-degree pivoting fence for angle cuts
- Ergonomic D-handle designed for comfortable cutting operation
Cons
- Supplied with an abrasive wheel rather than a cold cut carbide blade
- Spec table contains erroneous 0.21 kg weight and rectangular blade shape entries
- Abrasive cutting produces sparks, heat, and burrs unlike true cold saws
- Listing omits no-load speed and cutting capacity dimensions
VEVOR Chop Saw, 14-inch Stainless Steel Cold Cut
A 14-inch chop saw powered by a 3500 W brushless motor with 10-speed RPM control, 5.12-inch cut capacity, and a 66-tooth cold cut blade.
Pros
- Powerful 3500 W brushless motor with 10-speed adjustment from 750 to 1200 RPM
- Supplied with a 14-inch 66-tooth cold cut blade rated for over 3,500 cuts
- Stated 5.12-inch cutting width and thickness capacity
- Features soft-start electronics, auto-return guard, and quick-release vise
Cons
- Requires a 240V/60Hz power source
- No warranty term is stated in the listing
- Listing contradicts itself on maximum speed between 1200 RPM and 1300 RPM
- Spec table lists blade material as stainless steel rather than carbide-tipped teeth
Evolution S210CCS Metal Cutting Circular Saw
An 8-1/4 inch handheld circular metal cutting saw with an 1800 W motor, 3-inch cutting depth, chip collector, and mild steel TCT blade.
Pros
- Supplied with an 8-1/4 inch 50-tooth mild steel TCT blade for cool, burr-free cuts
- Cuts up to 1/2-inch steel plate with a 3-inch adjustable cutting depth
- Integrated high-capacity chip collector captures metal cuttings
- Features an electronic blade brake, LED cutline light, and parallel edge guide
Cons
- No warranty term is stated, listing only a limited warranty without duration
- Spec table contains errors listing weight as 16 ounces and blade shape as rectangular
- Handheld circular design requires guide rails or steady hands for long straight cuts
- Smaller 8-1/4 inch blade cannot cut large structural tubing in a single pass
14 Inch 72T Metal Circular Saw Blade
A 14-inch 72-tooth tungsten carbide saw blade with a 1-3/16 inch arbor and 1-inch gasket, rated for low-speed metal cutting up to 1200 RPM.
Pros
- 72 tungsten carbide teeth designed for clean, burr-free dry metal cutting
- Laser-cut expansion slots reduce vibration and noise during cuts
- Fits 1-3/16 inch (30 mm) arbors and includes a 1-inch reduction gasket
- Cuts both ferrous and non-ferrous metals including rebar up to 50 mm diameter
Cons
- Standalone saw blade only, requiring a compatible low-speed chop saw or miter saw
- No warranty term is stated in the listing
- Restricted to a maximum speed of 1200 RPM for solid metal bars
- Blade thickness of 2.2 mm requires rigid saw clamping to prevent blade deflection
How we scored them
Each tool is scored out of 100 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Mains cutting tools require an independent safety listing such as UL, CSA, or ETL to score on electrical safety; none of the listings here state one, so each scores zero on that criterion. Only DEWALT states a concrete warranty term, so rankings reflect performance, construction, value, and verified warranty coverage.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 16-inch ZB-400G | 7.8 | 33 | 22 | 22 | 0 | 0 |
| DEWALT 14-inch D28730 | 6.6 | 22 | 20 | 20 | 0 | 3 |
| VEVOR 14-inch J1G-ZB-355G-3B | 6.6 | 29 | 21 | 21 | 0 | 0 |
| Evolution S210CCS | 6.6 | 28 | 20 | 21 | 0 | 0 |
| EXFEIN 14-inch Blade | 5.8 | 21 | 19 | 19 | 0 | 0 |
Buying guide: how to choose a cold saw for metal
Cold cutting versus abrasive chop saws
An abrasive chop saw cuts metal by friction, using a resin bonded wheel that grinds through steel while producing high heat, slag, sparks, and abrasive dust. In contrast, a cold saw uses a toothed blade, typically tungsten carbide or cermet tipped, running at lower speeds to slice away distinct metal chips. Because cutting heat transfers directly into the discarded chips, the workpiece remains cool to the touch and ready for immediate welding fit up. Readers seeking broader metal cutting comparisons can explore our guides to the best cold cut saw and what is a cold saw.
Blade diameter and tooth count
Blade sizes in this guide span from 8-1/4 inches with 50 teeth up to 16 inches with 96 teeth. Larger 14-inch and 16-inch blades handle structural shapes, thick-walled tubing, and solid bars in single passes, while smaller 8-1/4 inch blades provide maneuverability on flat plate. Tooth counts correspond to material thickness: higher tooth counts such as 72 or 96 teeth deliver clean cuts in thin pipe and rebar, while lower counts clear larger chips in heavy solid stock. Always observe manufacturer speed limits, such as the 1200 RPM limit specified for solid bars on the EXFEIN blade.
Motor wattage and electrical supply
Motor power dictates how easily a saw sustains cutting speed through dense stock without bogging down. The tools here range from 1800 W on the Evolution handheld saw to 3500 W on the brushless VEVOR chop saw. Voltage is a crucial distinction: the DEWALT 2300 W saw runs on a standard 120V circuit, whereas the 3000 W and 3500 W VEVOR models require a dedicated 240V connection. Confirm your shop electrical service before selecting a machine.
Miter angles and stock clamping
Accurate angle cutting saves considerable fit up time before welding. The VEVOR 16-inch saw provides dual-direction mitering from -45° to 45°, allowing opposite angle cuts without flipping the workpiece. The DEWALT and VEVOR 14-inch units offer 45-degree angle adjustments with quick-action clamping vises to secure workpieces against cutting forces. For bevel cuts on flat sheet, the Evolution circular saw tilts from 0° to 45°.
Handheld versus stationary cutting
Stationary chop saws provide rigid bases, integrated clamping vises, and stable pivoting arms suitable for straight cutoff work and 45-degree angle cuts on tube, angle iron, and bar stock. Handheld metal cutting circular saws, such as the Evolution S210CCS, function like traditional circular saws to rip metal roofing, framing, and steel plate up to 1/2 inch thick directly on the jobsite.
Use as directed. Metal cutting generates sharp chips, noise, and airborne fragments. Always secure workpieces firmly in the vise before cutting, never reach across the blade path, wear ANSI-rated eye and hearing protection, and allow the blade to reach full speed before contacting stock. See the OSHA welding overview and our Safety Disclaimer.
Frequently Asked Questions
What is a cold saw for metal?
A cold saw for metal is a circular cutting machine that uses a toothed carbide or cermet blade rotating at lower speeds to cut through metal stock. Unlike abrasive chop saws that melt and grind through stock, cold saws shear away metal chips so the cut edge remains cool and free of heavy burrs. This leaves an edge that can be welded or fitted immediately without extensive deburring.
Why do you get cold saws instead of abrasive chop saws?
Metalworkers choose cold saws because they produce clean, accurate cuts without generating intense heat, abrasive dust clouds, or showers of sparks. Abrasive wheels wear down quickly and produce burrs and heat discoloration, whereas toothed cold saw blades maintain a consistent cutting diameter and leave workable edges. While cold cut blades represent a higher initial expense, they reduce post-cut cleanup.
Can you put a cold cut blade on a standard wood miter saw?
Standard wood miter saws spin much faster than the recommended speeds for metal cutting blades, which can damage the teeth and create hazardous operating conditions. Dedicated metal cutting saws operate at lower speeds, such as the 750 to 1500 RPM ranges stated across these listings, to maintain safe cutting action in steel. Purpose-built metal saws also provide heavier metallic chip shielding and enclosed blade guards.
What voltage do metal chop saws require?
Power requirements depend on the motor rating of the saw. Standard 120V workshop outlets handle tools like the 2300 W DEWALT chop saw and the 1800 W Evolution circular saw. Higher-powered stationary machines, such as the 3000 W and 3500 W VEVOR models here, specify 240V circuits to handle their power requirements.
Do dry cut cold saws require liquid coolant?
The saws and blades evaluated here are dry-cutting tools that do not require liquid coolant. They utilize cermet or tungsten carbide teeth designed to transfer cutting heat into the expelled metal chips rather than the workpiece. Applying steady downward feed pressure and staying within the stated speed ratings helps prevent premature blade wear.
Related: what is a cold saw, best cold cut saw, best horizontal band saw, and the metal fab tools category. Also see our guides to the plasma cutter for metal, the best angle grinder, and the best welding table for a home shop.
About the author
WeldGearLab Editorial is the editorial team behind WeldGearLab. We research product listings, specifications, safety listings and warranty terms, score every pick with the published Gear Score method, and correct errors when readers report them. We do not run our own shop trials; see How We Pick for exactly how picks are made.