1/16 vs 1/8 Tungsten Electrode: Which One Should You Buy?
1/16 vs 1/8 tungsten electrode: 1/16 described from the listings on blends, current and certification, with four 1/16 electrodes compared.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ARCCAPTAIN TIG Welding Tungsten Electrode 10-Pack 3/32"x 7"9.6/10View on Amazon - 2
YESWELDER TIG Welding Tungsten Electrode 2% Lanthanated 10-pk9.6/10View on Amazon - 3
ARCCAPTAIN TIG Welding Tungsten Electrode 10-Pack 0.04" x 7"9.6/10View on Amazon - 4
YESWELDER TIG Welding Tungsten Electrode Pure Tungsten 10-pkView on Amazon - 5
YESWELDER TIG Welding Tungsten Electrode 2% Lanthanated 5pkView on Amazon - 6
ARCCAPTAIN TIG Welding Tungsten Electrode Blue 2% LanthanatedView on Amazon - 7
ARCCAPTAIN TIG TungstenView on Amazon - 8
ARCCAPTAIN TIG Welding Tungsten Electrode 10-Pack 1/16"x 7"View on Amazon - 9
WeldingCity 10-pk Premium TIG Welding Tungsten Electrode RodView on Amazon
1/16 vs 1/8 tungsten electrode is a diameter question: the rods in these listings are titled as 1/16-inch electrodes for lower-current TIG work, in pure, 2% ceriated and rare-earth blends, with 7-inch length stated on two of the four. One honest note up front: every listing here is titled as a 1/16-inch electrode, so this guide describes 1/16 from the listings and tells you how to weigh the 1/8 side of the question.
Other welders and gear to compare
YESWELDER TIG Welding Tungsten Electrode Pure Tungsten 10-pkCheck price on Amazon
YESWELDER TIG Welding Tungsten Electrode 2% Lanthanated 5pkCheck price on Amazon
ARCCAPTAIN TIG Welding Tungsten Electrode Blue 2% LanthanatedCheck price on Amazon
ARCCAPTAIN TIG TungstenCheck price on Amazon
ARCCAPTAIN TIG Welding Tungsten Electrode 10-Pack 1/16"x 7"Check price on Amazon
WeldingCity 10-pk Premium TIG Welding Tungsten Electrode RodCheck price on Amazon
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
1/16 vs 1/8 tungsten electrode: the difference in one paragraph
From the listings, 1/16-inch tungsten is the small-diameter end of TIG: the ARCCAPTAIN 2% ceriated is stated as best in DC welding at low current settings, and all four are 10-packs titled as 1/16-inch rods, with 7-inch length stated on the YESWELDER and ARCCAPTAIN. The 1/8 side of the comparison is the question buyers ask alongside it, but no 1/8 listing is included here, so this guide makes no claims about 1/8 beyond the question itself. If your work is low-current DC or thin material, the 1/16 listings speak directly to you.
Side by side
| Product | Type | Diameter | Current | Certification | Packaging |
|---|---|---|---|---|---|
| ARCCAPTAIN 2% Ceriated Grey | 2% Ceriated (WC20/EWCe-2) | 1/16 x 7 in | AC or DC, best DC low current | AWS A5.12M/A5.12:2009 | Vacuum packed |
| Midwest Purple Rare Earth | Rare Earth Blend (EWG) | 1/16 in | AC & DC | AWS A5.12, MSDS + cert | Not stated |
| Midwest Grey 2% Ceriated | 2% Ceriated (WC20/EWCe-2) | 1/16 in | AC & DC | AWS A5.12, MSDS + cert | Not stated |
| YESWELDER Pure Green | Pure (EWP) | 1/16 x 7 in | AC, heavy load only | AWS A5.12M/A5.12:2009 | Vacuum packed |
What 1/16 is for, from the listings
The ARCCAPTAIN listing gives the fullest picture: 2% ceriated tungsten with good electrical conductivity, usable in AC or DC, performing best in DC at low current settings, with wide application across titanium, copper, magnesium, aluminum and nickel alloys plus low-alloyed and non-corrosive steels. The YESWELDER pure tungsten suits AC welding of heavy load conditions only. The Midwest Purple rare-earth blend and Grey 2% ceriated are stated as exceptional for both AC and DC across the same alloy families. All four adhere to AWS A5.12 standards; two state vacuum packing for long preservation.
The gear: four 1/16 electrodes, ranked
The ARCCAPTAIN 2% ceriated tops the ranking on detail: 1/16 by 7 inches (1.6 by 175mm), grey, WC20/EWCe-2, with AWS A5.12M/A5.12:2009 conformance and vacuum packing. The Midwest Purple rare-earth blend follows: 1/16-inch, EWG, US manufacturing, with a free MSDS and certificate of conformance. The Midwest Grey 2% ceriated is the same package in ceriated form: WC20/EWCe-2, AC and DC, US made. The YESWELDER pure green EWP rounds out the set: at least 99.5% tungsten for AC welding of heavy load conditions, with color-coded outer packaging. None of the four states a warranty.
Blends and packaging
Three blends appear: pure tungsten (green, EWP), 2% ceriated (grey, WC20/EWCe-2, twice) and rare-earth blend (purple, EWG). Every pack is a 10-pack titled as 1/16-inch rods, while the Midwest grey bullets describe 0.040 inch electrodes. Packaging details: vacuum packing on the YESWELDER and ARCCAPTAIN, color-coded outer packaging on the YESWELDER, and US-based manufacturing with MSDS and certificate of conformance on both Midwest packs. Weights run 2.11 to 3.2 ounces per pack.
Blend choice: what the listings say
The four listings cover three blends, and each states its own use case. The YESWELDER pure tungsten (green, EWP) states at least 99.5% tungsten and suits AC welding of heavy load conditions only, per its bullets, with AWS A5.12M/A5.12:2009 conformance. The ARCCAPTAIN 2% ceriated (grey, WC20/EWCe-2) states it works in AC or DC and performs best in DC welding at low current settings, with AWS A5.12M/A5.12:2009, DIN EN 26848 and GB/T 31908-201 conformance and 100% traceability. The Midwest grey is also 2% ceriated (WC20/EWCe-2) with the same AC and DC application range. The Midwest purple is a rare earth blend (EWG) stated as exceptional for both AC and DC. All four are 10-packs titled as 1/16-inch electrodes; 7-inch length is stated on the YESWELDER and ARCCAPTAIN only, the Midwest packs state no length, and the Midwest grey bullets describe 0.040 inch electrodes. Match the blend to your process: the pure listing is the AC-only one here, while the ceriated and rare earth listings state both AC and DC.
Packaging, color codes and paperwork
Tungsten electrodes are color-coded, and the listings lean on that. Green for pure, grey for 2% ceriated, purple for the rare earth blend: the YESWELDER listing says checking the outer packaging color saves time and reduces errors. Both the YESWELDER and ARCCAPTAIN listings state vacuum packing for no oxidation and long preservation. The two Midwest listings state US-based manufacturing with knowledgeable staff, plus a free MSDS and certificate of conformance linked from the listing. The ARCCAPTAIN states 100% traceability. Weights run 2.11 ounces for the YESWELDER pack and 3.2 ounces for the other three. Note one listing gap: the Midwest grey bullets describe 0.040 inch electrodes while the title says 1/16 inch; trusting the title, it is a 1/16 inch pack, but the mismatch is worth checking before you buy.
FAQ for welders
What is a 1/16 tungsten electrode used for?
Per the listings: lower-current TIG work in 1/16-inch rods, with the 2% ceriated stated as best in DC at low current settings, across alloy families from aluminum to nickel alloys. Pure tungsten suits AC welding of heavy load conditions.
What do the color codes mean?
The listings state: green for pure tungsten (EWP), grey for 2% ceriated (WC20/EWCe-2) and purple for the Midwest rare-earth blend (EWG). The YESWELDER adds color-coded outer packaging to tell types apart.
Do these come with any certification?
The YESWELDER and ARCCAPTAIN state AWS A5.12M/A5.12:2009 conformance. Both Midwest packs state AWS A5.12 adherence with a free MSDS and certificate of conformance.
1/16 vs 1/8: which should I choose?
The listings here cover only 1/16, so this guide cannot answer the 1/8 half from data. What the listings do say: 1/16 is the small-diameter, lower-current end of TIG, with 2% ceriated best at low DC current. Weigh that against your amperage before deciding.
Related: pure tungsten vs ceriated tungsten, the best tungsten electrode for beginners and the best shielding gas for tig welding.




