Welding Sleeves vs Welding Gloves: Which One Should You Buy?
QeeLink leather welding sleeves vs two BEETRO TIG glove packs: arm coverage against hand protection, compared on materials, stitching, count and stated safety.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
BEETRO Working Gloves 5 Pairs9.6/10View on Amazon - 2
QeeLink Leather Welding Work Sleeves for Men&Women9.6/10View on Amazon - 3
BEETRO Working Gloves 12 Pairs9.5/10View on Amazon
Verdict. Pick welding sleeves when your arms take the heat: overhead work, close torch work, or any job where sparks rain on your forearms. Pick welding gloves when you need hand protection with dexterity: handling hot parts, feeding wire, or general shop work. Many welders end up owning both, since sleeves and gloves protect different areas.
This welding sleeves vs welding gloves comparison starts from one fact: hot metal, sparks and UV reach your arms and your hands, and no single item covers both well. This comparison puts the QeeLink leather welding sleeves against two BEETRO TIG glove packs on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The three picks
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | BEETRO Working Gloves 5 Pairs | 9.6/10 | Buy on Amazon |
| 2 | QeeLink Leather Welding Work Sleeves for Men&Women | 9.6/10 | Buy on Amazon |
| 3 | BEETRO Working Gloves 12 Pairs | 9.5/10 | Buy on Amazon |

BEETRO Working Gloves 5 Pairs
Five pairs of goatskin and cowhide TIG welding gloves with DP-KEV stitching, cut and flame resistant, with an elastic wrist.
Pros
- Goatskin and cowhide leather, cut resistant and flame retardant
- DP-KEV stitching with extra cowhide length for wrist protection
- Elastic wrist keeps out dirt; slip-on fit
- Lists TIG, Stick and MIG welding among applications
Cons
- No glove size stated
- No warranty term stated
- 1.02 kg for 5 pairs, heavier per pair than the 12-pair
- Heat resistance listed as no data in its own table

QeeLink Leather Welding Work Sleeves for Men&Women
A pair of X-Large leather welding sleeves with Kevlar stitching and a cotton lining, heat and flame resistant.
Pros
- 100% heavy-duty genuine leather outer
- Kevlar stitching with cotton lining
- Heat and flame resistant arm protection stated
- X-Large size stated
Cons
- No warranty term stated
- Only 2 sleeves in the pack
- No stretch in the fabric
- Bullets section is empty in the listing

BEETRO Working Gloves 12 Pairs
Twelve pairs of cowhide split leather TIG welding gloves with Kevlar stitching, heat and fire resistant.
Pros
- 12 pairs, the bulk buy here
- Cowhide split leather, heat and fire resistant
- Kevlar stitching
- Wing thumb, ambidextrous fit
Cons
- No glove size stated
- No warranty term stated
- Unlined
- Lightweight fabric class, less substantial than the 5-pair
Other welders and gear to compare
Lincoln Electric Camo Welding SleevesCheck price on Amazon
VEVOR Flame Resistant Welding Work SleevesCheck price on Amazon
Lincoln Electric FR Cotton Welding SleevesCheck price on Amazon
Lincoln Electric Welding SleevesCheck price on Amazon
QeeLink Welding Jacket Split Leather SleevesCheck price on Amazon
Tillman 6200E 23" Green Welding Sleeves 9 oz Brand: TillmanCheck price on Amazon
welding sleeves vs welding gloves: side by side
| BEETRO 5-Pair Gloves | QeeLink Welding Sleeves | BEETRO 12-Pair Gloves | |
|---|---|---|---|
| Gear Score | 9.6 | 9.6 | 9.5 |
| Side | Welding gloves | Welding sleeves | Welding gloves |
| Count | 5 pairs | 2 sleeves | 12 pairs |
| Material | Goatskin and cowhide | 100% genuine leather | Cowhide split leather |
| Stitching | DP-KEV | Kevlar | Kevlar |
| Lining | Unlined | Cotton | Unlined |
| Size | Not stated | X-Large | Not stated |
| Warranty | None stated | None stated | None stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 19 October 2026. None of the three listings states a warranty term or a CSA, UL or ETL listing.
Coverage: arms vs hands
The QeeLink sleeves cover the forearm: two X-Large leather sleeves with a cotton lining, made for heat and flame resistant arm protection. The BEETRO gloves cover the hands and wrists: the 5-pair pack lists extra length in premium cowhide for wrist protection with an elastic wrist, and both glove packs use a wing thumb and ambidextrous fit. Sleeves leave the hands free for bare or gloved work; gloves leave the forearms to a jacket or shirt. If your work is mostly TIG with low spatter, gloves plus a long-sleeve shirt may be enough; if you run MIG or stick overhead, sleeves earn their place.
Materials and stitching
All three are leather. The QeeLink uses 100% heavy-duty genuine leather outer with Kevlar stitching and a cotton lining, in a heavyweight, no-stretch build. The BEETRO 5-pair combines goatskin (white) and cowhide (brown) leather with DP-KEV stitching, and the maker calls the gloves cut resistant and flame retardant. The BEETRO 12-pair is cowhide split leather with Kevlar stitching, unlined, in a lightweight fabric class. Stitching differs across the three: the QeeLink sleeves and the 12-pair gloves state Kevlar stitching, while the 5-pair states DP-KEV stitching.
Count, sizing and value
The QeeLink ships 2 sleeves in X-Large; it is the only listing here that states a size. The BEETRO 5-pair ships 5 pairs and the 12-pair ships 12 pairs, and neither states a glove size. For a one-person shop, 5 pairs is a long supply; for a shared shop or a crew, 12 pairs spreads across more hands. The 12-pair is the bulk buy, the 5-pair the middle ground, and the sleeves a single purchase that lasts as long as the leather holds.
Choose welding sleeves if
- You weld overhead or in positions where sparks fall on your arms.
- You want arm protection you can pull on over a shirt without a full jacket.
- You already own gloves you like and only the forearms need cover.
Choose welding gloves if
- You handle hot parts, feed wire or grip tools all day.
- You want one purchase to cover hands for the whole shop.
- You TIG weld and want a 5-pair pack with extra cowhide wrist coverage.
The sleeves in detail: what the QeeLink pair offers
The QeeLink is the only sleeve example here, so the sleeve side is described through it. The pair is 100% heavy-duty genuine leather in the heavyweight fabric class with no stretch, Kevlar stitching and a cotton lining, in X-Large and brown for unisex adult fit. The listing states heat and flame resistance plus UV protection, hand wash care, and a weight of 0.54 kg for the pair. Two sleeves are in the box. Sleeves cover what gloves cannot: the forearm up past the elbow, which is the zone that catches spatter when the arms are under the work in overhead or vertical positions.
The gloves in detail: 5-pair vs 12-pair
The two BEETRO packs differ in build and in count. The 5-pair pack mixes goatskin (white) with cowhide (brown): soft goatskin for touch sensitivity and grip, plus extra-length premium cowhide at the wrists for protection, stitched with DP-KEV for flame retardance. The slip-on design uses an elastic wrist that keeps out dirt and debris. Its application list names TIG, Stick and MIG welding alongside general work. The 12-pair pack is cowhide split leather throughout with Kevlar stitching, a leather palm, wing thumb and ambidextrous fit, listed at 13 by 6.7 by 2.7 inches. Both packs are unlined, so neither insulates against sustained heat; they are spark and spatter gloves, not foundry gloves.
Matching the gear to the process
The BEETRO 5-pair’s listing names TIG, Stick and MIG, which covers the home shop. For TIG, where the hands are close to a small arc and touch sensitivity matters, the goatskin build’s precise fit is the stated advantage. For stick and MIG, where spatter is heavier, the longer cowhide wrists and the sleeve pair earn their place: gloves end at the wrist, and the QeeLink sleeves carry coverage up the forearm. Buy the 12-pair when gloves are consumables for a crew or a long project run; buy the 5-pair when the gloves are your personal daily pair. Sleeves layer over a jacket or a long shirt, and the pair format means one box covers both arms.
FAQ for welders
Do I need both sleeves and gloves?
They protect different areas: sleeves cover the forearms, gloves cover the hands and wrists. Many welders wear both, especially for MIG and stick work overhead.
Are these gloves good for TIG welding?
Both BEETRO packs list TIG among their applications, and the 5-pair uses soft goatskin the maker says will not interfere with touch sensitivity. The 12-pair is cowhide split leather, also listed for TIG.
What size are the gloves?
Neither BEETRO listing states a glove size. The QeeLink sleeves are X-Large. If fit is critical, check with the seller before ordering.
Do any of these have a warranty?
No. None of the three listings states a warranty term; the QeeLink listing only points to a warranty information page.
Can I wear sleeves over a jacket?
The QeeLink sleeves are pull-on arm covers in X-Large with no stretch, made to be worn over a shirt or under a jacket cuff. The listing does not state compatibility with specific jackets.
Related: best welding gloves for grinding, deerskin vs goatskin welding gloves, best welding gloves for summer and cowhide vs deerskin welding gloves.
Scoring, line by line
All three are scored on performance, build, value, safety and warranty. For this gear, performance means the protection the listing states for the area it covers, build means materials and stitching, and safety needs stated heat, flame or cut resistance. None of the three states a warranty term, so warranty scores zero across the board.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BEETRO 5-Pair Gloves | 9.6 | 29 | 21 | 20 | 7 | 0 |
| QeeLink Welding Sleeves | 9.6 | 28 | 21 | 20 | 7 | 0 |
| BEETRO 12-Pair Gloves | 9.5 | 28 | 19 | 22 | 6 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.
Before you strike an arc. Wear a helmet with the right shade for the process and amperage, safety glasses underneath, gloves and flame resistant clothing that covers your arms. Weld with good ventilation, clear anything flammable from the area, and keep an extinguisher close.




