Welding Lens Sizes Chart: Match the Lens to Your Helmet
Welding lens sizes come down to the rectangle that fits the helmet window and the shade that sets how dark it goes, and this guide covers size and shade with 4 lenses that show the range.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ArcOne S240-10 Horizontal Single Auto-Darkening9.5/10View on Amazon - 2
Tefuawe Hand Series 2x4 1/4 Automatic Welding9.5/10View on Amazon - 3
Ridge Products | Gold Shade 12 Auto Darkening9.4/10View on Amazon - 4
10 Pack of 2x4.25 Clear Welding Lenses9.4/10View on Amazon
The helmet window is empty, the old lens is scratched past seeing through, and the next bead cannot wait for a lens that does not fit. That is the whole problem behind welding lens sizes: the rectangle has to match the helmet opening, and the shade has to match the work. This guide covers the sizes below, what each shade number means, and how to match a lens to a helmet before ordering.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

ArcOne S240-10 Horizontal Single Auto-Darkening
A shade 10 auto-darkening filter in the 2 x 4 inch size, with 2 sensors and a 5.25 square inch viewing area.
Pros
- Shade 10 auto-darkening filter for the 2 x 4 inch size
- 2 independent sensors and a 0.5 millisecond switching speed
- 5.25 square inch active viewing area
- Water and dust resistant
Cons
- Fixed shade 10, with no variable shade range
- Fits 2 x 4 inch helmets only, not 2 x 4.25 inch
- Heavier than the Ridge Products lenses
- No TIG rating is stated

Tefuawe Hand Series 2x4 1/4 Automatic Welding
A variable shade automatic lens in the 2 x 4.25 inch size, with a 2 Amp TIG rating, a hand gesture grind mode and a stainless steel frame.
Pros
- Variable shade with multiple settings
- 2 Amp TIG rating for low amperage TIG work
- Hand gesture function switches between weld and grind mode
- Stainless steel frame reflects infrared light and keeps the cartridge cooler
Cons
- No warranty term is stated
- Hand gesture function is not recommended for outdoor use
- Fits 2 x 4.25 inch helmets only
- Heaviest lens here at 0.26 lb

Ridge Products | Gold Shade 12 Auto Darkening
A shade 12 auto-darkening lens in the 2 x 4.25 inch size, solar powered with CR1025 batteries, made for sugar scoop and pancake hoods.
Pros
- Fixed shade 12 auto-darkening lens
- Solar powered, with CR1025 batteries
- Fits sugar scoop and pancake welding hoods
- Free replacement for up to a year
Cons
- Not recommended for TIG welding below 90A
- Fixed shade 12, with no variable shade range
- CR1025 batteries eventually die and need replacing
- Fits 2 x 4.25 inch helmets only

10 Pack of 2x4.25 Clear Welding Lenses
10 clear 2 x 4.25 inch cover lenses, each 0.04 inch thick, that sit in front of the dark lens and take the spatter.
Pros
- 10 lenses in the pack, so spares are on hand
- 2 x 4.25 inch size matches the Tefuawe and Ridge Products gold lenses here
- Lightweight 10 pack at 0.1375 lb
- Free replacement for up to a year
Cons
- Clear lenses only, with no darkening shade
- 2 x 4.25 inch size only, so they will not fit a 2 x 4 inch helmet
- Thin 0.04 inch lenses that scratch and pit with use
- An extra layer in front of the lens to keep clean
Welding lens sizes and what the numbers mean
A welding lens size is the size of the rectangle that fits the helmet window, given as width by height in inches. The lenses in this guide carry 2 sizes: 2 x 4 inches and 2 x 4.25 inches. A 2 x 4 inch lens fits a helmet with a 2 x 4 inch window, and a 2 x 4.25 inch lens fits a helmet with a 2 x 4.25 inch window. Size has nothing to do with how dark the lens goes; that is the shade.
The shade is a separate number. The ArcOne filter in this guide is shade 10, the Ridge Products gold lens is shade 12, and the Tefuawe lens is a variable shade lens with multiple settings. The Ridge Products series runs from shade 9 to shade 13. Clear cover lenses have no shade at all; they sit in front of the dark lens and take the spatter. A higher shade number means a darker lens, so shade 12 runs darker than shade 10. The welding helmet shade chart sets out shade by process, and the variable shade vs fixed shade comparison covers the choice between a fixed shade and a variable one.
Lens sizes side by side
| ArcOne S240-10 | Tefuawe Hand Series | Ridge Gold Shade 12 | Ridge Clear Cover 10-Pack | |
|---|---|---|---|---|
| Type | Auto-darkening filter | Auto-darkening lens | Auto-darkening lens | Clear cover lens |
| Lens size | 2 x 4 in | 2 x 4.25 in | 2 x 4.25 in | 2 x 4.25 in |
| Shade | 10 | Variable | 12 | Clear cover |
| Thickness | Not stated | 0.19 in | Not stated | 0.04 in |
| TIG rating | Not stated | 2 Amp | Not below 90A | Not stated |
| Warranty | 3 years | Not stated | Free replacement up to 1 year | Free replacement up to 1 year |
Measure the helmet window or read the size off the old lens before ordering, and match the rectangle exactly. A lens that is too small leaves a gap at the edge, and a lens that is too large will not seat in the window.
Shade, TIG rating and grind mode
The Tefuawe lens carries a 2 Amp TIG rating and a hand gesture function that switches the lens between weld and grind mode, so the same lens covers TIG, MIG, stick and plasma work with a grinding feature. The Ridge Products gold shade 12 lens is solar powered with CR1025 batteries, and the maker warns against TIG welding below 90A, where the lens can lose battery and flash the welder. The ArcOne filter switches in 0.5 milliseconds with a dark to light delay of 0.2 seconds, and it uses 2 independent sensors.
Cover lenses are the consumable layer. The Ridge Products 10 pack gives 10 clear 2 x 4.25 inch cover lenses, each 0.04 inch thick, that sit in front of the dark lens and take the spatter so the dark lens stays clear longer. Swap a cover lens when it gets pitted or hard to see through. The best auto-darkening welding lens 2×4 roundup covers more lenses in the 2 x 4 inch size.
The gear: lenses for 2 x 4 and 2 x 4.25 helmets
Once you have measured the helmet window and picked a shade, each lens below handles its part of the job: the ArcOne and Tefuawe lenses darken for the arc, the Ridge Products gold lens holds a fixed shade 12, and the clear cover pack protects the lens behind it.
Arc flash and shade. A lens with the wrong shade or a cracked cover leaves the eyes open to arc flash. Pick the shade for the process and the amperage, keep a spare cover lens in the shop, and check the lens for cracks before striking an arc. See the OSHA welding overview.
FAQ for welders
What size welding lens do I need?
Measure the helmet window or read the size off the old lens. The 2 sizes in this guide are 2 x 4 inches and 2 x 4.25 inches. A lens must match the window exactly, since a 2 x 4 inch lens does not fit a 2 x 4.25 inch window.
What does shade 10 mean on a welding lens?
Shade 10 is the darkness of the ArcOne filter in this guide. A higher shade number means a darker lens, so shade 12 runs darker than shade 10. Match the shade to the process and the amperage, and check the maker details for any TIG warning before you buy.
Can I use a 2 x 4 inch lens in a 2 x 4.25 inch helmet?
No. The lens must match the helmet window, and a 2 x 4 inch lens is shorter than a 2 x 4.25 inch opening. Use the size stamped on the old lens or in the helmet manual. The Tefuawe lens and the Ridge Products lenses in this guide are 2 x 4.25 inches, and the ArcOne filter is 2 x 4 inches.
What are clear welding cover lenses for?
A clear cover lens sits in front of the dark lens and takes spatter and scratches. The Ridge Products pack in this guide holds 10 clear 2 x 4.25 inch lenses, each 0.04 inch thick. Swap the cover when it gets pitted so the dark lens behind it stays clear.
Do auto-darkening lenses need batteries?
The Ridge Products gold shade 12 lens is solar powered and uses CR1025 batteries, and the maker says the weld arc recharges the lens while you weld. The ArcOne filter lists 2 independent sensors and a switching speed of 0.5 milliseconds. Battery types vary by lens, so read the maker details for the lens you buy, and the welding helmet battery size guide explains the common battery sizes.
Related: best lens for welding helmet, welding helmet maintenance, and the welding helmets hub.




