Welding Gloves With Shield: 5 Shield Pairs Compared
Five welding gloves with shield protection compared: foil layers, heat shields and long cuffs, with heat ratings, ANSI levels and warranty terms.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVclpower 16 in Gloves9.6/10View on Amazon - 2
Best DexterityCaiman 1812-5 Gloves9.6/10View on Amazon - 3
Best AbrasionWells Lamont 10549.5/10View on Amazon - 4
Women’s FitLincoln Jessi Combs9.4/10View on Amazon
Stick welding overhead throws sparks down your cuffs, and MIG on thick plate radiates heat straight into your palms. Welding gloves with shield protection, a foil layer, a heat shield or a long gauntlet cuff, are the answer when standard gloves are not enough. The five below are compared on heat ratings, stated ANSI levels, cuff length, stitching and warranty, all from their listings.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Vclpower 16 in Gloves: 932 F, foil layer, 16 in cuff, ANSI heat level 3. Check price on Amazon
- Best Dexterity Caiman 1812-5 Gloves: Kontour pre-curved fit, heat shield, Kevlar, 30-day warranty. Check price on Amazon
- Best Abrasion Wells Lamont 1054: ANSI abrasion level 4, thumb shield, Kevlar stitching. Check price on Amazon
- Women’s Fit Lincoln Jessi Combs: Sized for women’s hands, Kevlar threading, cotton liner. Check price on Amazon
The machines

vclpower Welding Gloves 16-Inch 932°F Heat
16-inch welding gloves in 1.2 mm cowhide with an aluminum foil heat layer, Kevlar stitching and a 932 F rating.
Pros
- 932 F heat resistance, ANSI/ISEA Heat Level 3
- Aluminum foil layer under palm and fingers
- 16 in gauntlet cuff shields forearms
- Double-layer cowhide palm; Kevlar stitching
Cons
- Warranty field shows no term
- 13 oz; 16 in cuff is bulky for fine work
- Not water resistant per the listing
- No safety certification beyond the ANSI levels

Caiman Premium Pig Grain MIG/Stick Welding Gloves
Top grain pigskin MIG/stick gloves with a heat shield, Kontour pre-curved fit, Kevlar thread and a 30-day warranty.
Pros
- Heat-shield and Lean-On reinforcements
- Kontour pre-curved fingers; keystone thumb
- Top grain pigskin with FR cotton fleece lining
- 30 Day Limited warranty stated
Cons
- ANSI Heat Level 2 is lower than the vclpower's 3
- No length stated
- Left-hand orientation per the spec table
- 30 days is a short term

Wells Lamont Men's Welding Gloves
Split cowhide welding gloves with Kevlar stitching, a thumb shield, full lining and ANSI/ISEA Abrasion Level 4.
Pros
- ANSI/ISEA Abrasion Level 4, highest here
- Reinforced cowhide thumb shield
- Kevlar thread with fully welted seams
- Fully lined; 5 in gauntlet cuff
Cons
- Warranty says manufacturer's defects, no term
- No heat level or temperature stated
- Listing notes the gloves are not flame retardant
- 13.6 oz

Welding Gloves, 3D, Wing, 13In, Blueblack, PR
Heavy-duty MIG/stick gloves in pigskin with a 13-inch length, reinforced palm and fleece/foam lining.
Pros
- Pigskin leather, heavy duty
- 13 in length with wing thumb
- Reinforced palm; fleece and foam lining
- Machine washable per the spec table
Cons
- No warranty stated
- No safety certification or ANSI level stated
- No heat rating stated
- Thinnest listing of the five

Lincoln Electric womens Jessi Combs Women s MIG
Women's MIG/stick welding gloves in leather with Kevlar threading and a cotton liner, sized small.
Pros
- Sized for women's and children's hands
- Kevlar threading; leather reinforced stress points
- Soft cotton liner; straight thumb for sensitivity
- Fully lined interior with moisture-absorbing cuff
Cons
- Warranty: no specified time period
- No safety certification stated
- No heat rating stated
- Bracelet sleeve, no gauntlet coverage
Other welders and gear to compare
Caiman Premium Split Deerskin MIG/Stick Welding Gloves withCheck price on Amazon
Caiman Premium Split Deerskin MIG/Stick Welding GlovesCheck price on Amazon
RAPICCA Welding Gloves for MenCheck price on Amazon
RAPICCA MIG Welding Gloves for MenCheck price on Amazon
TOPDC Welding Gloves 16Inch 1000℉ Heat Resistant Leather forCheck price on Amazon
Spec sheet comparison
| Gloves | Gear Score | Length | Heat Rating | Stitching | Warranty |
|---|---|---|---|---|---|
| Vclpower 16 in Gloves | 9.6/10 | 16 in | 932 F, ANSI heat 3 | Kevlar | Not stated |
| Caiman 1812-5 Gloves | 9.6/10 | Not stated | ANSI heat 2 | Kevlar | 30-day |
| Wells Lamont 1054 | 9.5/10 | 14.3 in | ANSI abrasion 4 | Kevlar | Not stated |
| Miller 263339 Gloves | 9.4/10 | 13 in | Not stated | Reinforced | Not stated |
| Lincoln Jessi Combs | 9.4/10 | Not stated | Not stated | Kevlar | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 October 2026. The Caiman states a 30-day limited warranty term.
Buying guide: welding gloves with shield
What the shield is
Shield means different things here. The vclpower has a heat-reflective aluminum foil layer under the palm and fingers, the areas most exposed when gripping hot tools. The Caiman has Lean-On and Heat-Shield reinforcements on the left hand plus double-stitched palm padding. The vclpower, Wells Lamont and Caiman all run long cuffs: 16 inches, a 5-inch gauntlet cuff, and a gauntlet cuff respectively, against the Miller’s 13-inch length and the Lincoln’s bracelet sleeve. For overhead stick work, cuff length is the shield that matters most.
Heat ratings and ANSI levels
Stated heat figures: the vclpower lists 932 F heat resistance with ANSI/ISEA Heat Level 3, Impact Level 2 and Abrasion Level 3. The Caiman lists ANSI/ISEA Heat Level 2. The Wells Lamont lists ANSI/ISEA Abrasion Level 4, the highest abrasion rating here. The Miller and Lincoln state no ANSI levels and no temperature figure. The Wells Lamont listing notes the gloves are not flame retardant, so it is the abrasion pick here, not a heat pick. A stated level beats a marketing claim every time: it is the only heat number you can compare across listings.
Leather, lining and stitching
Leathers: 1.2 mm cowhide on the vclpower, top grain pigskin with split cowhide back on the Caiman, split cowhide on the Wells Lamont, pigskin on the Miller, and high-grade leather on the Lincoln. Linings: cotton on the vclpower, Lincoln and Wells Lamont; flame-resistant cotton fleece on the Caiman; fleece and foam on the Miller. Every pair here uses Kevlar stitching or threading except the Miller, which lists reinforced stitching. Kevlar seams matter because standard thread is the first thing to go near an arc.
Fit and the women’s option
The Lincoln Jessi Combs is sized for women’s and children’s hands in small, with a straight thumb for fingertip sensitivity; the rest are men’s or unisex sizing in large and XL ranges. The Caiman’s Kontour pre-curved fingers and keystone thumb aim at dexterity; the Miller uses a wing thumb. If the gloves do not fit, the protection does not matter: check the size charts, which the Miller, Wells Lamont and Caiman listings include.
FAQ for welders
What does the shield do on welding gloves?
As the listings describe it: the vclpower’s aluminum foil layer reflects radiant heat under the palm and fingers; the Caiman’s heat-shield reinforcements add protection on the left hand; long cuffs shield wrists and forearms from sparks and spatter.
Which of these has the highest heat rating?
The vclpower, with a stated 932 F heat resistance and ANSI/ISEA Heat Level 3. The Caiman states Heat Level 2; the Wells Lamont states Abrasion Level 4 but no heat level.
Are any of these good for TIG welding?
These are MIG and stick gloves, thick and heat-focused. For TIG dexterity see our best TIG welding gloves guide.
Which has a warranty?
The Caiman states a 30-day limited warranty. The vclpower listing shows a warranty field with no term, the Lincoln says no specified time period, and the Wells Lamont says manufacturer’s defects with no term.
How do I care for leather welding gloves?
The Lincoln says hand wash with mild soap and cold water, air dry, and store cool and dry; the Wells Lamont and Caiman say hand wash; the Miller spec table says machine wash. The vclpower lists no care instructions.
Related: our best leather welding gloves and best welding gloves for high heat picks. Also see best welding gloves for dexterity, best stick welding gloves and the welding safety gear category.
Scoring, line by line
Each pair is scored out of 10 on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on our How We Pick page. Three listings state ANSI/ISEA levels; the Caiman states a 30-day limited warranty term.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Vclpower 16 in Gloves | 9.6 | 30 | 21 | 20 | 7 | 0 |
| Caiman 1812-5 Gloves | 9.6 | 29 | 22 | 20 | 4 | 1 |
| Wells Lamont 1054 | 9.5 | 28 | 21 | 20 | 5 | 0 |
| Miller 263339 Gloves | 9.4 | 27 | 20 | 20 | 0 | 0 |
| Lincoln Jessi Combs | 9.4 | 27 | 20 | 19 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.




