Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Silica vs Fiberglass Welding Blanket: Which One Should You Buy?

Silica and fiberglass blankets differ by material, and the fiberglass blankets in this guide state a 1,022°F working temperature with grommets for hanging.

Silica vs Fiberglass Welding Blanket: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 12 Pack Welding Blanket 6x8 ft2 Pack Welding Blanket 6x8 ft9.7/10View on Amazon
  2. 2Welding Blanket Fire Resistant Large 6x8 ftWelding Blanket Fire Resistant Large 6x8 ft9.7/10View on Amazon
  3. 3YESWELDER Fiberglass Welding Blanket 4 x 6ft InsulationYESWELDER Fiberglass Welding Blanket 4 x 6ft Insulation9.6/10View on Amazon
  4. 46x8ft Welding Blanket6x8ft Welding BlanketView on Amazon
  5. 5Welding Blanket Fire Resistant Large 4x6 ftWelding Blanket Fire Resistant Large 4x6 ftView on Amazon
  6. 6ARCCAPTAIN Welding Blanket 10x10FTARCCAPTAIN Welding Blanket 10x10FTView on Amazon
  7. 7ARCCAPTAIN 2PC Welding Blanket 6x8FTARCCAPTAIN 2PC Welding Blanket 6x8FTView on Amazon

Sparks, spatter and hot metal do not stay where the arc puts them, and a welding blanket is the shield that keeps them from reaching benches, floors and nearby gear. For silica vs fiberglass welding blanket shoppers, the listings in this guide point to fiberglass: every blanket covered here is fiberglass, with a stated working temperature and grommets for hanging as a shield or cover.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Silica vs Fiberglass Welding Blanket: The Material Difference

The focus keyword names silica and fiberglass as the materials to compare, and this guide compares them from the listings at hand. The fiberglass side is the side with stated figures here: a working temperature of 1,022°F (550°C) on every pick, fabric weights of 24.7 oz/yd² or 19.8 oz/yd², and sizes from 4×6 ft to 10 x 10 ft.

Silica, as the other material in the keyword, has no listing in this guide, so no silica figure is stated here. A shop comparing materials should compare the stated working temperature, fabric weight, size and hanging method on the listing in hand, rather than assuming a material label alone settles the choice.

Side by Side

kanhiro 6×8 ft 2 Pack YESWELDER 4×6 ft 2 Pack SecuCaptain 4×6 ft 1 Pack VEVOR 10 x 10 ft
Size 6×8 ft 4×6 ft 4×6 ft 10 x 10 ft
Thickness 0.31 inch (8 mm) 0.31 inch (8 mm) 0.31 inch (8 mm) Not stated
Fabric weight 24.7 oz/yd² 24.7 oz/yd² 24.7 oz/yd² 19.8 oz/yd²
Working temperature 1,022°F (550°C) 1,022°F (550°C) 1,022°F (550°C) 1,022°F (550°C)
Grommets Metal, 0.59 inch ID Brass, 0.59 inch bore, every 11 inch Reinforced metal, 0.59 inch, washers Equipped grommets
Pack 2 pack 2 pack 1 pack 1 pack

The table reads across by blanket, not by material, because every listing here is fiberglass. Size sets the largest area a blanket can shield, fabric weight states how heavy the fabric is per square yard, and grommets decide how it hangs.

The 4 Blankets in This Guide

kanhiro 6×8 ft 2 Pack. The kanhiro blanket leads this guide on coverage among the 24.7 oz/yd² picks: a 6×8 ft size in a 2 pack, with a 30 x 30 per square inch weave and a hem sewed by Kevlar thread. Metal grommets with a 0.59 inch inside diameter suit hanging as a vertical shield or cover for equipment and floor surfaces. The listing advises against cutting and advises folding to create a smaller blanket as needed, and it notes fiberglass on the surface and advises wearing gloves when checking the blanket.

YESWELDER 4×6 ft 2 Pack. The YESWELDER blanket is a 4×6 ft blanket in a 2 pack, made from 24.7 oz/yd² fiberglass with a thickness of 0.31 inch (8 mm) and a working temperature of 1,022°F (550°C). The title gives the thickness as 1/3 inch, while the bullets give 0.31 inch (8 mm); this guide uses the bullets figure. The listing states MIG, TIG and stick welding applications, and brass grommets placed every 11 inch with a 0.59 inch bore diameter suit hanging. The spec table gives 1.0 inch dimensions that do not match the 4×6 ft size in the title and bullets; this guide uses the title and bullets size.

SecuCaptain 4×6 ft 1 Pack. The SecuCaptain blanket is a 4×6 ft blanket in a 1 pack, made from 24.7 oz/yd² fiberglass with a 30 x 30 per square inch weave, a thickness of 0.31 inch (8 mm) and a working temperature of 1,022°F (550°C). Reinforced metal grommets with a double-sided thick black plastic washer and durable stitched hems suit hanging as a vertical shield or cover for equipment, floors and work surfaces. The listing notes fiberglass fibers may be present on the surface and advises wearing gloves when handling.

VEVOR 10 x 10 ft. The VEVOR blanket is the largest blanket in this guide at 10 x 10 ft, made from 19.8 oz/yd² fiberglass with a working temperature of 1,022°F (550°C). Grommets adjust the working area, and the blanket folds for transport and storage. The listing states it cannot be used flat on the ground and needs to be hung up for use, so plan hanging points before use. The spec table dimensions differ from the 10 x 10 ft blanket size in the title and bullets; this guide uses the title and bullets size.

How to Choose Between Silica and Fiberglass

Start with size: measure the bench, floor area or equipment to shield, then match it to a stated blanket size, from 4×6 ft to 10 x 10 ft in this guide. Next, compare fabric weight and working temperature on the listing: the fiberglass picks here state 24.7 oz/yd² or 19.8 oz/yd² and a working temperature of 1,022°F (550°C). Then check hanging: grommet type and spacing decide how a blanket hangs as a vertical shield, and pack count decides whether a shop gets a spare blanket for an additional area.

Weave and hem matter for repeated use in a shop. The kanhiro and SecuCaptain blankets state a 30 x 30 per square inch weave, the kanhiro hem is sewed by Kevlar thread, and the SecuCaptain grommets carry a double-sided thick black plastic washer. A blanket that folds for storage also suits a shop with limited storage space, and the listings here state folding for transport and storage.

Hanging and Storage

Grommets are the hanging method on every pick here: brass on the YESWELDER blanket, metal on the kanhiro blanket, reinforced metal with washers on the SecuCaptain blanket, and equipped grommets on the VEVOR blanket. Folding is the storage method the listings state: the blankets fold for transport and storage, and the kanhiro and SecuCaptain listings advise folding rather than cutting to create a smaller blanket. The VEVOR blanket needs hanging for use, so plan hanging points before use.

FAQ for welders

What is the difference between silica and fiberglass welding blankets?

The keyword names silica and fiberglass as blanket materials to compare. This guide covers fiberglass blankets, with stated working temperatures, fabric weights, sizes and grommets for hanging. A shop comparing materials should compare those stated figures on the listing in hand, since a material label alone does not state a working temperature or size.

What working temperature do these fiberglass blankets state?

Every blanket in this guide states a working temperature of 1,022°F (550°C). That figure covers the kanhiro, YESWELDER, SecuCaptain and VEVOR blankets alike. Compare that stated figure with the heat of the work at hand before choosing a blanket.

What size welding blanket should cover a bench or floor area?

Match the stated blanket size to the area to shield: 4×6 ft for the YESWELDER and SecuCaptain blankets, 6×8 ft for the kanhiro blanket, and 10 x 10 ft for the VEVOR blanket. Pack count matters too, since the YESWELDER and kanhiro blankets come in a 2 pack while the SecuCaptain and VEVOR blankets come in a 1 pack. Measure the area to shield, then pick the stated size that covers it.

Can a welding blanket be cut to a smaller size?

The kanhiro and SecuCaptain listings advise against cutting and advise folding to create a smaller blanket as needed. That advice applies to those listings, not to every blanket here. Check the listing for the blanket in hand before cutting any blanket.

Do fiberglass welding blankets need gloves for handling?

The kanhiro and SecuCaptain listings note fiberglass fibers may be present on the surface and advise wearing gloves when handling. That note applies to those listings. Check the listing for the blanket in hand for handling notes before use.

Related: best welding blanket material, best welding blanket for home garage, best carbon felt welding blanket, and the welding safety gear hub.

More buying guides