Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Grade R vs Grade T Welding Hose: Which One Should You Buy?

Grade R and Grade T welding hose look alike on the bench, but the grade, the length and the stated extras split the 4 hoses in this guide.

Grade R vs Grade T Welding Hose: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Oxygen Acetylene Hose 1/4-Inch × 25 Feet with 9/16”-18 BOxygen Acetylene Hose 1/4-Inch × 25 Feet with 9/16”-18 B9.7/10View on Amazon
  2. 2100 FT Argon Hose Inert Gas Welding Hoses for MIG/TIG AH-100100 FT Argon Hose Inert Gas Welding Hoses for MIG/TIG AH-1009.6/10View on Amazon
  3. 3RX WELD 50 FT 1/4" Oxy Acetylene Welding Hose with 9/16"-18 BRX WELD 50 FT 1/4" Oxy Acetylene Welding Hose with 9/16"-18 B9.6/10View on Amazon
  4. 4Oxygen Acetylene Hose 1/4" × 25FTOxygen Acetylene Hose 1/4" × 25FTView on Amazon
  5. 5Oxygen Acetylene Hose 1/4" × 50FTOxygen Acetylene Hose 1/4" × 50FTView on Amazon
  6. 6ARCCAPTAIN Grade T Oxygen Acetylene HoseARCCAPTAIN Grade T Oxygen Acetylene HoseView on Amazon
  7. 7VEVOR Oxygen Acetylene HoseVEVOR Oxygen Acetylene HoseView on Amazon
  8. 8SÜASÜAView on Amazon
  9. 9WeldingCity 25-ft 3/8" Grade-T Red and Green Rubber Twin HoseWeldingCity 25-ft 3/8" Grade-T Red and Green Rubber Twin HoseView on Amazon

The torch is set, the cylinders are chained to the cart, and the hose is the part that has to carry gas from the regulators to the torch without leaking, kinking or cracking. Grade R vs grade T welding hose is the choice that sits behind that hose: the grade stated in the listing decides what the hose is built for. This guide compares the hoses in the listings below on grade, length, fittings and pressure, and names the grade that fits oxy-acetylene work.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Grade R vs Grade T Welding Hose: What Each Grade Means

Grade R is the oxy-acetylene grade in these listings. The RX WELD 100 Feet hose and the RainBello hose carry Grade R in the title, and the RX WELD 25FT hose states Grade R in its listing details; all describe oxy-acetylene welding and cutting. Grade R rubber is the standard twin-line hose for oxygen and acetylene, with a red line for acetylene and a green line for oxygen.

Grade T is the heavy-duty grade here, and only the ARCCAPTAIN hose carries it. The listing describes T-grade rubber with resistance to oil, abrasion and weathering, a spring guard on one end, and a service life of 10 years or more. By the grade definition, Grade T also covers fuel gases beyond acetylene, such as propane, while Grade R is the acetylene grade. No other listing here states a service life, and the only warranty stated here, a 180-Day term, sits on the same hose.

The short version: Grade R does the job for oxy-acetylene work, and Grade T is the heavier-duty hose for harsher shop conditions and for fuel gases beyond acetylene. The rest of this guide shows where the listings back that up and where they stay silent.

Side by side

ARCCAPTAIN Grade T 50FT RX WELD 100 Feet RX WELD 25FT RainBello 25FT
Gear Score 67 60 50 40
Grade Grade T Grade R Grade R Grade R
Length 50 FT 100 Feet 25 Feet 25FT
Inner diameter 1/4 inch 1/4 inch 1/4 inch 1/4 inch
Fittings 9/16-18 B 9/16-18 B 9/16-18 B 9/16-18 B
Working pressure 300 PSI 300 PSI 300 PSI 300 PSI
Burst pressure 900 PSI 900 PSI 900 PSI Not stated
Temperature range Not stated Not stated Not stated -40°F to 200°F
Service life 10 years or more Not stated Not stated Not stated
Warranty 180-Day Not stated Not stated Not stated

All 4 hoses in this guide use 9/16-18 B fittings and a 1/4 inch inner diameter, and all state a 300 PSI maximum working pressure. Where they split is grade, length, burst pressure and the extras: only the ARCCAPTAIN hose is Grade T, only the RainBello hose states a temperature range, and only the RX WELD 25FT hose states a protective cover over the hose ends.

The 4 Hoses in This Guide

ARCCAPTAIN Grade T 50FT. The Grade T pick, and the top score here. The listing states T-grade rubber with oil, abrasion and weathering resistance, a spring guard on one end, a storage strap, a 300 PSI working pressure and a 900 PSI burst pressure, plus a service life of 10 years or more and a 180-Day warranty. The 50 FT length sits between the short hoses and the long hose in this guide.

RX WELD 100 Feet. The long Grade R hose. The listing states Grade R rubber, a 1/4 inch inner diameter, 9/16-18 B fittings, a 300 PSI working pressure and a 900 PSI burst pressure, with oil resistance and flexibility for workshop use. The listing states no adapters are required for most professional setups. The 100 Feet length is the longest here, and it suits a shop where the cylinders sit away from the bench.

RX WELD 25FT. The short Grade R hose with stated protection at the ends. The listing states Grade R rubber, a 1/4 inch inner diameter, 9/16-18 B fittings, a 300 PSI working pressure and a 900 PSI burst pressure, and a built-in rubber protective cover that guards the hose ends against damage. The green line is for oxygen and the red line is for acetylene.

RainBello 25FT. The short Grade R hose with the only stated temperature range here. The listing states a high-tensile polyester braid, kink resistance, and flexibility from -40°F to 200°F, with 9/16-18 B fittings and a 300 PSI working pressure. No burst pressure is stated, which is the gap in this listing: the other hoses in this guide all state 900 PSI.

The best oxy acetylene torch kit for home shop guide covers torch kits that go with these hoses, and the best welding gas hose guide compares more hoses by the same measures.

When Grade R Is the Better Choice

  • Oxy-acetylene work. The Grade R listings here are built for oxygen and acetylene, with twin lines in red and green.
  • Short runs. The 25FT hoses keep the hose close to the cylinders and the torch, with less hose to coil and store.
  • Long runs. The 100 Feet hose reaches across a shop without moving the cylinders.
  • End protection. The RX WELD 25FT hose states a rubber cover over the hose ends, which guards the part of the hose that wears at the fittings.

When Grade T Is the Better Choice

  • Harsh shop conditions. The ARCCAPTAIN listing states T-grade rubber with resistance to oil, abrasion and weathering.
  • Fuel gases beyond acetylene. Grade T covers propane and other fuel gases, while Grade R is the acetylene grade.
  • Kink protection at the fitting. The spring guard sits on one end, where the hose bends at the connection.
  • Stated service life. The listing states a service life of 10 years or more, the only service life stated in this guide.
  • A stated warranty. The 180-Day warranty is the only warranty stated in this guide.

How to Tell Which Grade a Hose Is

Check the listing before you buy. The grade sits in the title on the RX WELD 100 Feet and RainBello hoses, Grade R on both, and Grade T on the ARCCAPTAIN hose. The RX WELD 25FT hose states Grade R in its listing details instead of its title. Then check the fittings and the pressure ratings: all 4 hoses here use 9/16-18 B fittings and state a 300 PSI maximum working pressure, so the grade, not the fittings, is what sets them apart.

On arrival, check the hose against the listing: the twin lines in red and green, the 9/16-18 B fittings, the spring guard on the ARCCAPTAIN hose, and the protective cover on the RX WELD 25FT hose ends. If the grade in the listing and the grade on the hose disagree, send it back.

Gas hose safety. A gas hose carries fuel gas under pressure, so a damaged hose is a fire risk. Keep the hose away from hot metal, sparks and sharp edges, check the connections for leaks before lighting the torch, and replace a hose that is cracked, soft or cut. Keep the cylinders upright, and follow the regulator and torch manual for the setup.

FAQ for welders

What is the difference between Grade R and Grade T welding hose?

In these listings, Grade R is the oxy-acetylene grade: the RX WELD and RainBello hoses state Grade R rubber for oxygen and acetylene. Grade T is the heavy-duty grade: the ARCCAPTAIN hose states T-grade rubber with oil, abrasion and weathering resistance, a spring guard, a service life of 10 years or more and a 180-Day warranty. By the grade definition, Grade T covers fuel gases beyond acetylene, such as propane, while Grade R is the acetylene grade. The grades share the same 1/4 inch inner diameter, the same 9/16-18 B fittings and the same 300 PSI working pressure in this guide.

Can I use one hose for oxygen and acetylene?

Yes, with a twin-line hose. The hoses here are twin-line: a red line for acetylene and a green line for oxygen, each with its own fitting. The colors identify each line, so connect each line to the regulator and torch fitting that matches its gas.

What fittings do these hoses use?

All 4 hoses in this guide use 9/16-18 B fittings. The RX WELD 100 Feet listing states no adapters are required for most professional setups, the ARCCAPTAIN listing states compatibility with most oxy-acetylene torch and regulator setups, and the RainBello listing states it fits most oxy-acetylene torch kits. The RX WELD 25FT listing states no compatibility claim. Check the fitting size on your torch and regulators before ordering, since a mismatched fitting stops the job.

What pressure are these hoses rated for?

All 4 hoses state a 300 PSI maximum working pressure. The RX WELD hoses and the ARCCAPTAIN hose also state a 900 PSI burst pressure. The RainBello hose states no burst pressure, so that figure stays unknown for that listing.

Which grade lasts longer?

Only the ARCCAPTAIN hose states a service life: 10 years or more. No Grade R listing here states a service life, so the listings give no basis for comparing how long each grade lasts. The RX WELD 25FT hose states a protective cover over the hose ends, and the ARCCAPTAIN hose states a spring guard; the listings state that the cover prevents end damage and the guard protects against wear.

Related: welding consumables, best welding gas hose, oxy propane vs oxy acetylene torch and best acetylene regulator for torch.

More buying guides

Welding Consumables ·

Best Rust Remover for Chrome (2026)

5 rust removers for chrome compared on stated size, form, chrome use and warranty, from sprays and liquid polish to a gallon iron remover.