Best Welding Magnets Under $20 (2026)
Five welding magnets under $20 compared by pull force, angles and pack: 25 to 55 lb fixed magnets and a switchable pick, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCMS MAGNETICS 50LB 4-Pack9.5/10View on Amazon - 2
Best HoldingGUTIMORE 55LB 3-Pack9.5/10View on Amazon - 3
Best ValueYESWELDER 25LB 4-Pack9.5/10View on Amazon - 4
Best SwitchableYESWELDER Switchable 44LB9.4/10View on Amazon
A third hand that never gets tired: that is what a welding magnet is. The best welding magnets under 20 hold your joint at 45, 90 or 135 degrees while both hands stay on the torch and the filler. We compared five magnets and sets by pull force, angles, pack count and what each Amazon listing publishes. The CMS MAGNETICS 4-pack takes it on 50 lb pull with ISO 9001 behind it; the GUTIMORE answers with 55 lb. We have not welded with any of them; this is a read of the listings.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall CMS MAGNETICS 50LB 4-Pack: 50 lb pull, 4-pack, made under ISO 9001, holds 45°, 90° and 135°. Check price on Amazon
- Best Holding GUTIMORE 55LB 3-Pack: 55 lb pull, the strongest here, in a 3-pack with arrow holders. Check price on Amazon
- Best Value YESWELDER 25LB 4-Pack: 4 arrow magnets at 25 lb for light fit-up and layout. Check price on Amazon
- Best Switchable YESWELDER Switchable 44LB: 44 lb with an on/off switch for easy repositioning. Check price on Amazon
The machines

4 Pieces of CMS Magneitcs® Magnetic Welding
A 4-pack of 50 lb welding magnets, made under ISO 9001, for TIG, MIG, stick and plasma work.
Pros
- 50 lb holding power, 4 magnets
- Made under ISO 9001 quality systems
- Holds 45, 90 and 135 degrees
- Listing names TIG, MIG, stick and plasma
Cons
- Ceramic magnets, not switchable
- No warranty term stated
- For magnetic materials only
- No size stated in the table

GUTIMORE 55LB Welding Magnet 3pcs,Magnetic Arrow
A 3-pack of 55 lb arrow welding magnets, the strongest pull here, for 45, 90 and 135 degree joints.
Pros
- 55 lb pull, strongest here
- 3 magnets with arrow holders and clamps
- 45, 90 and 135 degree angles
- Ferrite, silver finish
Cons
- Not switchable
- No warranty term stated
- For magnetic materials only
- No quality standard stated

YESWELDER 4-Pc Welding Magnet Set
A 4-pack of 25 lb arrow welding magnets for light fit-up, with 45, 90 and 135 degree angles.
Pros
- 4 magnets in one pack
- 25 lb pull for light welding tasks
- 45, 90 and 135 degree arrow design
- 3.15 x 2.12 x 0.47 in, easy to position
Cons
- 25 lb only; not for heavy stock
- Not switchable
- No warranty term stated
- No quality standard stated

YESWELDER Switchable Arrow Welding Magnet 33-44LBs
A single switchable 44 lb arrow welding magnet with on/off control for easy repositioning.
Pros
- On/off switch for easy repositioning
- 44 lb holding power stated
- 45, 90 and 135 degree arrow design
- 4.72 x 3.18 x 0.7 in
Cons
- Only 1 magnet in the pack
- Not the strongest pull here
- No warranty term stated
- No quality standard stated

ARCCAPTAIN Welding Magnets 2pcs 25LB Welding
A 2-pack of 25 lb welding magnets in a riveted steel frame for 45, 90 and 135 degree setups.
Pros
- Steel frame, riveted construction
- 45, 90 and 135 degree arrow design
- 25 lb pull for common tasks
- Red finish, easy to spot
Cons
- Only 2 magnets in the pack
- 25 lb only; not for heavy stock
- No warranty term stated
- No quality standard stated
Other welders and gear to compare
YESWELDER 25 lb and 50 lb Welding Magnet-4 Pc of WeldingCheck price on Amazon
TOOLIOM Arrow Welding Magnet SetCheck price on Amazon
Strong Hand Welding MagnetCheck price on Amazon
TOOLIOM Arrow Welding MagnetsCheck price on Amazon
YESWELDER Switchable Arrow Welding Magnet 2 Pc 33-44LBsCheck price on Amazon
Spec sheet comparison
| Magnet | Gear Score | Pull force | Angles | Pack | Warranty |
|---|---|---|---|---|---|
| CMS MAGNETICS 50LB 4-Pack | 9.5/10 | 50 lb | 45°, 90°, 135° | 4 | Not stated |
| GUTIMORE 55LB 3-Pack | 9.5/10 | 55 lb | 45°, 90°, 135° | 3 | Not stated |
| YESWELDER 25LB 4-Pack | 9.5/10 | 25 lb | 45°, 90°, 135° | 4 | Not stated |
| YESWELDER Switchable 44LB | 9.4/10 | 44 lb | 45°, 90°, 135° | 1 | Not stated |
| ARCCAPTAIN 25LB 2-Pack | 9.4/10 | 25 lb | 45°, 90°, 135° | 2 | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (19 October 2026). None of these listings states a warranty term, so warranty scores zero across the board.
Buying guide: best welding magnets under 20
Pull force and what it holds
Pull force runs from 25 lb (YESWELDER 4-pack, ARCCAPTAIN 2-pack) to 44 lb (YESWELDER switchable) to 50 lb (CMS MAGNETICS) and 55 lb (GUTIMORE). The 25 lb listings pitch light welding tasks, fit-up and layout; the 50 and 55 lb listings are for heavier stock. Buy the pull your work needs: too weak and the joint creeps mid-tack, too strong and you fight the magnet every time you reposition. See the best welding magnets for beginners.
The angles
All five hold 45, 90 and 135 degrees. That covers the common joints: 90 for corners and tees, 45 for miters, 135 for the obtuse side of the same joint. The arrow shape is what makes the multi-angle setup work; the CMS uses a rectangular body and the GUTIMORE uses an arrow shape, with the same three angles. See welding magnets for squaring.
Pack count
One magnet holds one corner. The 4-packs (CMS, YESWELDER) set up a full frame; the 3-pack (GUTIMORE) handles most boxes; the 2-pack (ARCCAPTAIN) covers a single joint; the single switchable YESWELDER is the repositioning specialist. Count your corners before you count your dollars.
Fixed vs switchable
Four of these are fixed: always on, always grabbing. The YESWELDER switchable has an on/off switch that deactivates the field for easy attach, remove and reposition. If you move magnets constantly during fit-up, the switch earns its keep; if you set and forget, a fixed magnet is simpler. See the best magnetic welding clamps.
Magnet materials, packs and the fine print
Start with what the magnets are made of, because the listings do say. The CMS MAGNETICS set lists ceramic magnets made under ISO 9001 quality systems. The GUTIMORE set lists ferrite with a silver finish. The YESWELDER 4-pack lists strong magnet plus iron in an arrow shape. The ARCCAPTAIN pair lists an alloy steel frame, riveted together, that the listing says will not melt while welding. The listings do not rank these materials against each other, so treat the material line as construction detail, not a quality verdict, and compare pull force and pack instead.
Then look at the switchable YESWELDER on its own terms. It is the only magnet here with an on/off switch, and the only single: 1 piece at 44 lb, 4.72 x 3.18 x 0.7 in, model SWM-S. The switch lets you kill the field to attach, remove and reposition without prying, which matters when you move magnets a dozen times during fit-up. The trade is that one magnet holds one spot; it cannot square a frame by itself. Buy the switch for repositioning speed, buy a multi-pack for holding geometry.
Do the pack math against your work. A rectangle has four corners: the CMS MAGNETICS and YESWELDER 4-packs hold all of them, which is why 4-packs are the default for frames and boxes. The GUTIMORE 3-pack covers most three-sided setups and leaves one magnet as a spare or a tacking aid. The ARCCAPTAIN 2-pack covers a single joint, tee or corner. Count the corners of what you actually build before you pick a pack.
Compare the two 25 lb listings head to head, since they share a pull force. The YESWELDER 4-pack (model KY1101) gives 4 arrow magnets at 3.15 x 2.12 x 0.47 in, pitched at light welding tasks and shop layout. The ARCCAPTAIN 2-pack (part AR001) gives 2 rectangular magnets in a riveted steel frame, pitched at welding, soldering, assembly, marking and pipe installation. Same 25 lb pull, different proposition: more magnets for layout, or a tougher frame for rough handling. Neither states a warranty term.
Finally, read the fine print for what is missing. None of the five listings states a warranty term, so warranty scores zero across this roundup. The CMS, GUTIMORE and ARCCAPTAIN listings state no dimensions or weight; the YESWELDER listings do. And every one of these is for magnetic materials only, per the CMS listing: aluminum and non-magnetic stainless will not hold, whatever the pull force says.
Before You Strike an Arc
- Match pull force to the work: 25 lb for light fit-up and layout; 50 to 55 lb for heavier stock.
- All five hold 45, 90 and 135 degrees, so pick by pull and pack, not by angles.
- The switchable YESWELDER turns on and off for easy repositioning; the rest are always on.
- Keep magnets out of the direct weld heat and wipe steel filings off the faces before each setup.
FAQ for welders
How much holding power do I need?
For light fit-up, tacking and layout, the 25 lb listings are pitched exactly at that. For heavier stock, the 50 lb CMS MAGNETICS and 55 lb GUTIMORE give you the margin. When in doubt, buy up a class.
What angles do welding magnets hold?
All five here hold 45, 90 and 135 degrees: 90 for corners and tees, 45 for miters, 135 for the obtuse side.
Switchable or fixed magnet?
The YESWELDER switchable has an on/off switch that lets you attach, remove and reposition easily. The other four are fixed and always on. Pick the switch if you reposition constantly.
Do welding magnets work on all metals?
No. The CMS listing says they apply to magnetic materials. They will not hold aluminum or non-magnetic stainless, so match the magnet to the metal.
Ceramic vs ferrite magnets?
The CMS lists ceramic and the GUTIMORE lists ferrite; the YESWELDER lists strong magnet plus iron. The listings do not rank them against each other, so compare pull force and pack instead.
Can I leave a magnet on during the weld?
The listings pitch magnets as fit-up and positioning aids that free your hands for welding. Keep them out of the direct arc heat and remove spatter and filings from the faces after.
Scoring, line by line
The Gear Score weighs performance, build, value, safety and warranty, with the weights published on our How We Pick page. For welding magnets, performance means stated pull force and angle range; a spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CMS MAGNETICS 50LB 4-Pack | 9.5 | 30 | 21 | 21 | 0 | 0 |
| GUTIMORE 55LB 3-Pack | 9.5 | 30 | 21 | 20 | 0 | 0 |
| YESWELDER 25LB 4-Pack | 9.5 | 29 | 20 | 21 | 0 | 0 |
| YESWELDER Switchable 44LB | 9.4 | 30 | 20 | 19 | 0 | 0 |
| ARCCAPTAIN 25LB 2-Pack | 9.4 | 28 | 19 | 19 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.
More welding guides
See welding magnets for squaring, the best welding magnets for beginners and the best welding table size.





