Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Scratch Awl (2026): 4 Picks for Marking Metal, Wood and Leather

Four scratch awls for marking metal, wood and leather, compared on point length, grip, striking end and what each maker states.

Best Scratch Awl (2026): 4 Picks for Marking Metal, Wood and Leather
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Klein Tools 6504DDBest OverallKlein Tools 6504DD9.7/10View on Amazon
  2. 2Dasco Pro VN74310Longest AwlDasco Pro VN743109.6/10View on Amazon
  3. 3ALLWAY IPSSoft GripALLWAY IPS9.6/10View on Amazon
  4. 4CRAFTSMAN CMHT65012Plain Alloy SteelCRAFTSMAN CMHT650129.5/10View on Amazon

A scribed line on sheet metal holds through handling, grinding dust and shop light, while a pencil mark rubs off before the cut. A scratch awl puts that line down with a sharp steel point, and the same tool starts a hole for a drill bit or marks a cut line on wood and leather. This guide lays out what to look for in the best scratch awl, using what each maker states about point length, grip, striking end and build.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Klein Tools 6504DD: A 4 inch steel tip-to-cap awl with a 1.3 inch strike cap and a cushion-grip handle, made to scribe metal and start holes. Check price on Amazon
  • Longest Awl Dasco Pro VN74310: A 7 inch one-piece drop forged awl that marks, scribes and starts holes in wood, metal and leather. Check price on Amazon
  • Soft Grip ALLWAY IPS: A soft-grip awl in high-carbon steel for wood, drywall and leather, with a diecast hammer end for anchor holes. Check price on Amazon
  • Plain Alloy Steel CRAFTSMAN CMHT65012: Heat-treated alloy steel with a comfort handle and a satin-nickel finish, for high and low torque work. Check price on Amazon

The machines

Klein Tools 6504DD Demolition Scratch Awl

Klein Tools 6504DD Demolition Scratch Awl

KLEIN TOOLS9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 inch steel tip-to-cap awl with a 1.3 inch strike cap and a cushion-grip handle, made to scribe metal and start holes.

Pros

  • Steel tip-to-cap build stands up to striking and prying
  • Oversized 1.3 inch strike cap gives a clear hammer target
  • Mushroom shaped cushion-grip handle guards the hand and resists slipping
  • Hard-pointed 4 inch awl scribes metal and starts holes

Cons

  • 9.49 inch overall length is long for a pocket or a small pouch
  • Maker states metal scribing only, with no wood or leather use stated
  • No warranty term is stated
  • No point cover is stated for storage
DASCO PRO 7 Inch Scratch Awl, Assembled in USA

DASCO PRO 7 Inch Scratch Awl, Assembled in USA

Dasco Pro9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7 inch one-piece drop forged awl that marks, scribes and starts holes in wood, metal and leather.

Pros

  • One-piece drop forged build for strength and durability
  • Marks, scribes and starts holes in wood, metal and leather
  • 7 inch length, 178 mm, for marking and scribing
  • American made, per the maker; the brand has made tools in the USA since 1923

Cons

  • No strike cap or hammer end is stated
  • Handle shape and grip material are not stated
  • No warranty term is stated
  • 7 inch length is long for marking in tight spots
ALLWAY IPS Professional Scratch Awl and Ice Pick

ALLWAY IPS Professional Scratch Awl and Ice Pick

ALLWAY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A soft-grip awl in high-carbon steel for marking and piercing wood, drywall and leather, with a diecast hammer end.

Pros

  • High-carbon steel point for piercing and marking
  • Soft-grip handle for comfort and control
  • Diecast hammer end for striking without a separate tool
  • Punctures anchor holes without a drill bit

Cons

  • Maker states wood, drywall and leather use, with no metal marking stated
  • 1.0 lb is the heaviest stated weight here
  • 10.5 inch length is the longest here
  • Awl point length is not stated
CRAFTSMAN CMHT65012 CFT SD ACETATE - SCRATCH AWL

CRAFTSMAN CMHT65012 CFT SD ACETATE - SCRATCH AWL

CRAFTSMAN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A heat-treated alloy steel awl with a comfort handle and a satin-nickel finish, for high and low torque work.

Pros

  • Heat-treated alloy steel for strength and durability
  • Comfort handle for high and low torque work
  • Satin-nickel finish
  • Model CMHT65012, so a reorder matches the awl you own

Cons

  • Maker states no marking material: no wood, metal or leather use stated
  • No strike cap or hammer end is stated
  • Item weight is not stated
  • Awl point length is not stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Point length Marks Construction Weight
Klein Tools 6504DD 9.7/10 4 in Metal Steel tip-to-cap 0.46 lb
Dasco Pro VN74310 9.6/10 7 in Wood, metal, leather One-piece drop forged Not stated
ALLWAY IPS 9.6/10 Not stated Wood, drywall, leather High-carbon steel 1.0 lb
CRAFTSMAN CMHT65012 9.5/10 Not stated Not stated Heat-treated alloy steel Not stated

Specifications are manufacturer rated, as published by each maker and collected 19 November 2026.

How to pick the best scratch awl

Point length, grip, striking end and tip steel decide which awl fits the bench. The notes below use only what each maker states, so a missing detail means the maker did not state it.

Point length

Point length decides how deep the awl reaches and how much point sits in the hand. The Klein states a 4 inch awl, and the Dasco states a 7 inch awl, 178 mm. The Allway states an overall length of 10.5 inches, and the Craftsman states overall length only, with no point length stated for either. A shorter point suits close marking, while a longer point reaches across a wider layout.

Grip and striking end

The grip is what keeps the awl in the hand when the point meets resistance. The Klein has a mushroom shaped cushion-grip handle that guards the hand and resists slipping, and the Allway has a soft-grip handle for comfort and control. The Craftsman has a comfort handle for high and low torque work, and the Dasco states no grip detail. For hammer work, the Klein has a 1.3 inch strike cap and the Allway has a diecast hammer end; the Dasco and the Craftsman state no striking end.

Tip steel and what it marks

Tip steel decides what the awl can mark. The Klein is steel tip to cap and states scribing metal. The Dasco is one-piece drop forged and states wood, metal and leather. The Allway is high-carbon steel and states wood, drywall and leather. The Craftsman is heat-treated alloy steel and states no marking material, so a buyer who marks steel should pick an awl whose maker states metal use.

Weight and overall length

Weight and length decide how the awl carries and handles. The Allway weighs 1.0 lb at 10.5 inches long, and the Klein weighs 0.46 lb at 9.49 inches long. The Dasco measures 7.0 inches long, with no weight stated for the Dasco or the Craftsman. Heavier awls suit striking work, while lighter awls suit longer marking sessions.

Use as directed. A scratch awl point is sharp steel, so keep it covered in storage and keep hands clear of the point when striking the cap or hammer end. Wear eye protection when striking any awl, and strike only a cap or hammer end the maker states, never the handle. See the Safety Disclaimer.

Before You Strike an Arc

  • Check the point on arrival: it should be straight, sharp and seated tight in the handle.
  • Check the strike cap on the Klein and the hammer end on the Allway for a tight fit before striking.
  • Match the awl to the material: the Klein and the Dasco state metal marking, while the Allway states wood, drywall and leather.
  • Keep the point covered in storage so it stays sharp and out of the way.

FAQ for welders

What is a scratch awl?

A scratch awl is a pointed steel tool for marking a line on a surface and starting a hole. The point scribes metal, wood and leather, depending on the awl, and the handle gives the grip to push or strike it. The awls here run from a 4 inch point on the Klein to a 7 inch awl on the Dasco.

What is the purpose of a scratch awl?

A scratch awl marks a cut line that stays put where a pencil mark rubs off, and it starts a hole for a drill bit or a fastener. The Klein states scribing metal and starting holes, the Dasco states marking, scribing and starting holes in wood, metal and leather, and the Allway states temporary marking and piercing anchor holes without a drill bit.

How do you sharpen a scratch awl?

None of the makers here states a sharpening method for its awl. Follow the guidance from the maker of the awl you own, and keep the point shape the awl shipped with.

Can a scratch awl mark sheet metal?

Yes, when the maker states metal marking. The Klein states scribing metal, and the Dasco states marking and scribing metal, so both suit sheet metal layout. The Allway states wood, drywall and leather only, and the Craftsman states no marking material.

Related: best metal scribe, best machinist square, metal scribe vs soapstone marker, and the layout tools hub.

Scoring, line by line

Each awl is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Scratch awls have no electrical safety listing to state, so every awl here scores zero on that criterion, and no maker here states a warranty term, so every awl scores zero on warranty too; the ranking comes from the other three.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Klein Tools 6504DD 9.7 30 22 21 n/a 0
Dasco Pro VN74310 9.6 29 22 21 n/a 0
ALLWAY IPS 9.6 28 20 20 n/a 0
CRAFTSMAN CMHT65012 9.5 26 20 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides