Best Rust Converter for Automotive (2026): 5 Picks for Frames and Bodywork
Five rust converters for automotive frames, chassis and bodywork, compared on size, dry time, coverage, heat resistance and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHOKOWE RUST019.7/10View on Amazon - 2
Clearest Dry Time and CoverageNetLea 17 oz9.7/10View on Amazon - 3
Quickest ConversionJENOLITE 150 ml9.6/10View on Amazon - 4
Largest Water Based SizeLISRUX 34 oz9.6/10View on Amazon
Rust starts where paint has chipped and road salt has settled, along a frame rail, under a floor pan, or around a bracket that holds a load. Left alone, it spreads under paint and thins the metal it sits on. The best rust converter for automotive work turns that rust into a stable surface that can take primer and paint, and this guide compares converters on what each listing states: size, colour, dry time, coverage, heat resistance and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.
Quick picks
- Best Overall HOKOWE RUST01: The largest size here at 35 Fl Oz, 2 thin coats, a finish in 24 hours, and the only stated warranty here, 1 year. Check price on Amazon
- Clearest Dry Time and Coverage NetLea 17 oz: Dries to the touch in 2 hours, covers up to 20 sq ft in 2 coats, and is heat resistant up to 350°F. Check price on Amazon
- Quickest Conversion JENOLITE 150 ml: Converts rust in 15 minutes and is ready to paint after 3 hours, with no primer needed. Check price on Amazon
- Largest Water Based Size LISRUX 34 oz: A 34 Fl Oz black converter and primer, heat resistant up to 350°F, with less than 1% VOCs. Check price on Amazon
The machines

HOKOWE 2-in-1 Rust Converter & Metal Primer 35oz
A 35 Fl Oz black converter and primer for automotive frames, trailers and tools, with 2 thin coats, a finish in 24 hours, and the only stated warranty here, 1 year.
Pros
- Largest size here at 35 Fl Oz, for frames, trailers and tools
- Stated 1 year manufacturer warranty, the only warranty term here
- Heat, UV and weather resistant finish for automotive parts
- Acts as a primer in one application, with no separate priming step
Cons
- No coverage figure is stated, so the area a container covers is unknown
- No dry time for the first coat is stated, only a finish in 24 hours
- No VOC figure or water based claim is stated
- Severe rust needs a quick grind first, per the maker, so it is not a brush and go job on heavy rust

NetLea 2-in-1 Rust Converter & Primer
A 17 oz converter and primer that dries to a matte black finish, with a stated dry time, a stated coverage figure, and heat resistance up to 350°F.
Pros
- Dries to the touch in 2 hours and is fully dry in 24 hours
- Covers up to 20 sq ft in 2 coats, the only coverage figure for a full container here
- Heat resistant up to 350°F, and stands up to UV, rain and road salt
- Works with oil based and water based topcoats, so it fits paint already on hand
Cons
- At 17 oz, it holds less than the 34 Fl Oz and 35 Fl Oz converters here
- Needs 2 thin coats, so a coat on its own does not finish the job
- Liquid looks dark grey in the can and goes on dark grey, which can look wrong until it dries to matte black
- No warranty term is stated

2-in-1 Rust Converter & Metal Primer
A 34 Fl Oz black converter and primer with heat resistance up to 350°F, a water based formula with less than 1% VOCs, and a first layer that dries in 24 hours.
Pros
- Large 34 Fl Oz size for automotive, machinery, marine, industrial and construction work
- Heat resistance up to 350°F
- Water based formula with less than 1% VOCs, and tools clean with water
- Seals out water and air, per the maker, to stop oxidation
Cons
- At least 2 layers are needed, with 24 hours of drying after the first layer
- Coated surface must stay dry and out of humid conditions for 7 days after the project is completed
- Cannot be applied on overcast and rainy days, per the maker
- No coverage figure is stated

JENOLITE Rust Converter for Metal
A 150 ml converter that converts rust in 15 minutes, is ready to paint after 3 hours, and covers up to 86 sq ft per liter, in a water based formula.
Pros
- Converts rust into a sealed stable surface in 15 minutes, the quickest conversion time here
- Ready to paint after 3 hours, with no primer needed
- Covers up to 86 sq ft per liter, per the maker
- Brush, roll or spray application, for automotive, machinery, railings, marine equipment and household use
Cons
- At 5 Fl Oz, it is the smallest container here, so it suits touch ups more than large frames
- No heat resistance figure is stated
- Needs 3 hours before painting, so painting cannot start right after application
- No warranty term is stated

2 in 1 Rust Converter & Metal paint Rust Reformer
A 16 Fl Oz white converter and primer for automotive, truck, farm, industrial, marine and construction use, with a water based, low odor formula.
Pros
- White colour, the only white converter here
- Water based, low odor and skin friendly, per the maker, with easy water clean up
- Applies directly to rust, with no sanding, priming or topcoats in the maker's description
- Suits automotive, truck, farm, industrial, commercial marine and construction use
Cons
- No dry time is stated, so the wait before handling or painting is unknown
- No coverage figure is stated
- No heat resistance figure is stated
- No brush, roll or spray method is stated, so the application tool is not given
Other welders and gear to compare
Rust Converter & Metal PrimerCheck price on Amazon
2-in-1 Rust Converter & Metal PrimerCheck price on Amazon
CARPOLY 2-in-1 Rust ConverterCheck price on Amazon
Rust Converter Paint & InhibitorCheck price on Amazon
36oz 2-in-1 Rust Converter Paint & Metal PrimerCheck price on Amazon
Best Rust Converter for Automotive: Compare the Picks
| Model | Gear Score | Size | Colour | Dry time | Coverage | Heat resistance | Warranty |
|---|---|---|---|---|---|---|---|
| HOKOWE RUST01 | 9.7/10 | 35 Fl Oz | Black | 2 thin coats, finish in 24 hours | Not stated | Heat resistant, temperature not stated | 1 year |
| NetLea 17 oz | 9.7/10 | 17 Fl Oz | Matte black | Dries to the touch in 2 hours, fully dry in 24 hours | Up to 20 sq ft, 2 coats | Up to 350°F | Not stated |
| LISRUX 34 oz | 9.6/10 | 34 Fl Oz | Black | First layer dries in 24 hours, at least 2 layers | Not stated | Up to 350°F | Not stated |
| JENOLITE 150 ml | 9.6/10 | 5 Fl Oz | Black / purple | Converts rust in 15 minutes, ready to paint after 3 hours | Up to 86 sq ft per liter | Not stated | Not stated |
| Generic White 16 oz | 9.4/10 | 16 Fl Oz | White | Dries fast, time not stated | Not stated | Not stated | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (18 November 2026).
Buying guide: what matters in an automotive rust converter
Size and coverage
Sizes here run from 5 Fl Oz to 35 Fl Oz. NetLea states coverage of up to 20 sq ft in 2 coats, and JENOLITE states coverage of up to 86 sq ft per liter. HOKOWE, LISRUX and Generic state no coverage figure, so the area a container covers is unknown for those converters. Match the container size to the area in front of you, since a frame rail and a full chassis call for very different amounts of converter.
Dry time
Dry time varies widely here. JENOLITE converts rust in 15 minutes and is ready to paint after 3 hours. NetLea dries to the touch in 2 hours and is fully dry in 24 hours. LISRUX needs 24 hours for the first layer to dry, and at least 2 layers are needed. HOKOWE needs 2 thin coats for a finish in 24 hours. Generic states fast drying, with no time stated, so plan around the stated times and leave the coating alone until the maker says it is ready.
Heat resistance
LISRUX and NetLea state heat resistance up to 350°F. HOKOWE states a heat, UV and weather resistant finish, with no temperature given. JENOLITE and Generic state no heat rating. For parts near an engine bay or exhaust, use a converter with a stated heat figure, and keep the coating away from heat while it dries.
Colour and finish
HOKOWE and LISRUX dry black, and NetLea dries to a true matte black finish after going on dark grey. JENOLITE is listed as black and purple. Generic is white, the only white converter here. HOKOWE, LISRUX and NetLea act as a primer, and JENOLITE needs no primer, so each converter leaves a surface that can take paint once the stated dry time has passed.
Water based formula and clean up
LISRUX, JENOLITE, NetLea and Generic state a water based formula. LISRUX states less than 1% VOCs, and tools clean with water. Generic states a low odor and skin friendly formula, with easy water clean up. NetLea states a mild odor, and states to open a window while applying. HOKOWE states no water based claim, so check the label on arrival for clean up and ventilation guidance.
Use as directed. Work in a ventilated space, keep the converter off skin and eyes, and keep it away from flames and sparks while it dries. Brush or roll it onto clean, dry rust, let each coat dry for the time the maker states, and keep the coated surface dry and out of rain while it dries. LISRUX states to avoid contact with water or a humid environment within 7 days after the project is completed, and not to apply on overcast and rainy days.
Before You Strike an Arc
- Clean loose rust, oil and dirt from the surface, and let it dry completely before brushing on a converter.
- Check the size and colour on arrival, and check that the lid seals, so the converter stays usable for the next repair.
- Brush or roll on thin coats, and let each coat dry for the time the maker states before adding the next coat.
- Plan the topcoat before starting, since NetLea works with oil based and water based topcoats, and JENOLITE can act as a primer.
- Keep the coated part dry while it dries, and keep water away from the LISRUX coating for the time its maker states.
FAQ for welders
Can you paint over rust converter?
Yes, the converters here are described as a primer or as a paintable finish. JENOLITE is ready to paint after 3 hours, with no primer needed. NetLea works with oil based and water based topcoats. HOKOWE, LISRUX and NetLea act as a primer, so let the coating dry for the time the maker states before painting.
How long does rust converter take to dry?
It depends on the converter. JENOLITE converts rust in 15 minutes and is ready to paint after 3 hours. NetLea dries to the touch in 2 hours and is fully dry in 24 hours. LISRUX needs 24 hours for the first layer to dry, and HOKOWE needs 2 thin coats for a finish in 24 hours. Generic states no dry time.
Does rust converter work on a truck frame?
Yes, the listings here state automotive, truck frame, car chassis, trailer and truck use. HOKOWE states use for automotive frames and trailers, NetLea states use for truck and trailer undercarriages, and Generic states use for a truck frame and car chassis. Clean the surface first, and give each coat the dry time the maker states.
Is rust converter heat resistant?
Some converters here are, and some state no heat rating. LISRUX and NetLea state heat resistance up to 350°F. HOKOWE states a heat, UV and weather resistant finish, with no temperature given. JENOLITE and Generic state no heat rating, so do not assume a heat figure where the listing gives none.
What size rust converter should I buy for automotive work?
Match the size to the area in front of you. Sizes here are 5 Fl Oz, 16 Fl Oz, 17 Fl Oz, 34 Fl Oz and 35 Fl Oz. NetLea covers up to 20 sq ft in 2 coats, and JENOLITE covers up to 86 sq ft per liter. A larger container suits a frame or chassis, while a smaller container suits a touch up or a small repair.
Related: best rust converter for truck frame, how to use rust converter, can you paint over rust converter, and the welding consumables hub. Also see our rust remover vs rust converter for car. Also see our best rust converter for auto body.
Scoring, line by line
Each converter is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No listing here states a safety standard, so every converter scores zero on that criterion, and only HOKOWE states a warranty term, so only that converter scores on warranty. The ranking comes from the other criteria, with size, dry time, coverage and heat resistance carrying the most weight.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HOKOWE RUST01 | 9.7 | 30 | 21 | 21 | n/a | 3 |
| NetLea 17 oz | 9.7 | 32 | 22 | 22 | n/a | 0 |
| LISRUX 34 oz | 9.6 | 30 | 21 | 20 | n/a | 0 |
| JENOLITE 150 ml | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Generic White 16 oz | 9.4 | 24 | 18 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




