Best Lifting Cart (2026): 5 Hydraulic Lift Table Carts Compared
Five hydraulic lift table carts for shop and warehouse work, compared on rated capacity, lift height, scissor type, wheels and the safety features each maker states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Highest CapacitySPECRAFT 770 lb Lift Table Cart9.7/10View on Amazon - 2
Tall Lift, Single ScissorVEVOR TFD15 Lift Table Cart9.6/10View on Amazon - 3
Lowest Stated Working HeightTera 330 lb Lift Table Cart9.6/10View on Amazon - 4
Folding HandleCAMMOO 500 lb Lift Table Cart9.5/10View on Amazon
Loading a heavy part onto a bench, a truck bed or a shelf is where a shop day goes wrong: the part is awkward, the lift is all back and arms, and a slip drops steel on concrete or on a foot. A hydraulic lift table cart puts the load on a platform, pumps it up to working height, and rolls it where it needs to go. This guide compares five hydraulic carts on what each maker states, load capacity, lift height, scissor type, wheels and named safety features, to find the best lifting cart for shop and warehouse work.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Highest Capacity SPECRAFT 770 lb Lift Table Cart: Rated at 770 lb with a 59 inch max height, a double scissor lift and a built-in height limit function. Check price on Amazon
- Tall Lift, Single Scissor VEVOR TFD15 Lift Table Cart: Lifts to 50 inches with a wide foot pedal, PU swivel wheels and a rubber non-slip pad. Check price on Amazon
- Lowest Stated Working Height Tera 330 lb Lift Table Cart: Extends from 10.4 to 49.6 inches with dual wheel locks, an anti-slip mat and a height limiter. Check price on Amazon
- Folding Handle CAMMOO 500 lb Lift Table Cart: Rated at 500 lb with a foldable handle, PU swivel wheels and overload protection rods, lifting to 28.5 inches. Check price on Amazon
The machines

SPECRAFT 770 Lbs Hydraulic Lift Table Cart
A double scissor lift table cart rated at 770 lb with a 59 inch max height, nylon wheels with a rear brake and a built-in height limit function.
Pros
- Rated at 770 lb, the highest capacity stated here
- 59 inch max height, the tallest lift stated here
- Double scissor lift with a foot pedal and handle
- Built-in limit function that stops the table rising too high
Cons
- Heaviest cart here at 139.0 lb item weight
- Nylon wheels where other picks here state PU wheels
- Manual foot pedal lift
- No warranty term is stated

VEVOR Hydraulic Lift Table Cart 330 lbs Load
A single scissor lift table cart rated at 330 lb that lifts to 50 inches, with PU swivel wheels, a locking mechanism and a rubber non-slip pad.
Pros
- Lifts to 50 inches on a single scissor frame
- Wide foot pedal with a hydraulic release lever for lowering
- PU swivel wheels with a locking mechanism
- Rubber non-slip pad and a maintenance and overload protection bar
Cons
- Rated at 330 lb, below the 500 and 770 lb picks here
- Single scissor design where other picks here state double scissor
- 116.84 lb item weight to move around the shop
- Manual foot pedal lift

Tera Hydraulic Lift Table Cart
A double scissor lift table cart rated at 330 lb that extends from 10.4 to 49.6 inches, with four PU swivel wheels and dual wheel locks.
Pros
- Double scissor frame that extends from 10.4 to 49.6 inches
- Foot pedal lift with a hydraulic release lever for descent control
- Four PU swivel wheels with dual wheel locks
- Anti-slip mat, safety rod, overload protection and height limiter
Cons
- Rated at 330 lb, below the 500 and 770 lb picks here
- 112.4 lb item weight
- Manual foot pedal lift
- No warranty term is stated

VEVOR Hydraulic Lift Table Cart
A double scissor lift table cart rated at 330 lb that lifts to 50 inches, with a folding handle, PU wheels and a rear wheel locking mechanism.
Pros
- Double scissor lift that raises the platform to 50 inches
- Folding handle with a protective guard and chrome plated grip
- PU wheels with cast iron hubs and a rear wheel locking mechanism
- Foot pedal lift with a control handle for lowering
Cons
- Rated at 330 lb, below the 500 and 770 lb picks here
- Longest footprint stated here at 39.76 inches
- 100.97 lb item weight
- Manual foot pedal lift

CAMMOO Hydraulic Lift Table Cart
A scissor lift table cart rated at 500 lb that raises loads to 28.5 inches, with a foldable handle and PU swivel wheels with a locking mechanism.
Pros
- Rated at 500 lb, above the three 330 lb picks here
- Foldable handle and a quick install foot pedal
- PU swivel wheels with a locking mechanism
- Handle side safety guard, rubber non-slip pad and overload protection rods
Cons
- Lifts to 28.5 inches, well below the 49.6 to 59 inch picks here
- Rated at 500 lb, below the 770 lb pick here
- Manual foot pedal lift
- Product dimensions of 27.6 x 17.7 x 28.5 inches limit oversize loads
Spec sheet comparison
| Model | Gear Score | Load capacity | Max lift height | Scissor type | Wheels | Item weight |
|---|---|---|---|---|---|---|
| SPECRAFT 770 lb Lift Table Cart | 9.7/10 | 770 lb | 59 in | Double scissor | Nylon wheels with brake | 139.0 lb |
| VEVOR TFD15 Lift Table Cart | 9.6/10 | 330 lb | 50 in | Single scissor | PU swivel wheels with locking mechanism | 116.84 lb |
| Tera 330 lb Lift Table Cart | 9.6/10 | 330 lb | 49.6 in | Double scissor | PU swivel wheels, dual locks | 112.4 lb |
| VEVOR PTS150 Lift Table Cart | 9.6/10 | 330 lb | 50 in | Double scissor | PU wheels, rear wheel lock | 100.97 lb |
| CAMMOO 500 lb Lift Table Cart | 9.5/10 | 500 lb | 28.5 in | Not stated | PU swivel wheels with locking mechanism | 97.0 lb |
Specifications are manufacturer rated, as published by each maker and collected 22 November 2026.
Buying guide: choosing the best lifting cart
Load capacity
Capacity is the first filter. The carts here are rated at 330, 500 and 770 lb. Quote the rated capacity exactly as the maker states it and never exceed it: a cart rated at 330 lb is the wrong tool for a load over that figure, however short the move. Weigh the load or check its stated weight before you pick a cart, and keep the load centered on the platform.
Lift height
Max lift height decides what the platform can reach: a bench top, a truck bed or a shelf. Stated max heights here run from 28.5 to 59 inches. Tera also states a lowered working height of 10.4 inches, which matters when you roll a load under something or load from floor level. Match the height range to the surfaces you actually load and unload.
Single scissor or double scissor
A scissor frame raises the platform as the crossed arms open. Double scissor designs stack two sets of arms and are the stated design on the SPECRAFT, Tera and VEVOR PTS150 carts here. The VEVOR TFD15 states a single scissor design. CAMMOO does not state single or double, so that field reads Not stated in the table above.
Wheels and locks
Wheel material and locking decide how the cart rolls and how it stays put. Four carts here state PU wheels, and the SPECRAFT states nylon wheels with a brake on the rear wheels. Locking arrangements vary: dual wheel locks on the Tera, a rear wheel locking mechanism on the VEVOR PTS150, and a locking mechanism on the VEVOR TFD15 and CAMMOO carts. Lock the wheels before you pump a load up.
Footprint and cart weight
Product dimensions and item weight decide whether the cart fits your floor space and how it feels to move empty. Stated item weights here run from 97.0 to 139.0 lb. The VEVOR PTS150 states the longest product dimension at 39.76 inches, while the CAMMOO states 27.6 x 17.7 x 28.5 inches and a foldable handle for storage. Check doorways, bench legs and storage corners against the stated dimensions.
Safety features the makers state
Read the stated features cart by cart. Height limiters appear on the SPECRAFT and Tera carts, and VEVOR states limiter protection on the TFD15. Overload protection is stated on the VEVOR TFD15, Tera and CAMMOO carts. Non-slip pads or mats are stated on the VEVOR TFD15, Tera and CAMMOO carts, and the VEVOR PTS150 and CAMMOO carts state handle guards. Whatever the features, never exceed the rated capacity and never lift a load over people.
Use as directed. Keep the floor around the cart clear, lock the wheels before lifting, and lower the platform fully before rolling a load any distance. Never exceed the rated capacity stated for the cart, and never position any part of your body under a raised platform.
Before You Strike an Arc
- Check the load weight against the rated capacity stated for the cart, 330, 500 or 770 lb here, before the load goes on the platform.
- Lock the wheels or set the rear brake, then check the non-slip pad or mat is in place where stated.
- Pump the platform through its full stated height range empty and watch the scissor frame and hydraulic pump for leaks or sticking.
- Confirm the platform reaches your bench, truck bed or shelf height, and that the stated product dimensions clear your doorways and storage spot.
FAQ for welders
What is a hydraulic lift table cart used for?
It raises a load on a platform with a hydraulic pump and scissor frame, then rolls it to where it is needed. Makers here name material handling, shelving work, retail stock handling and woodworking benches. The platform height adjusts with a foot pedal, so a load can be raised to match a bench or truck bed instead of being lifted by hand.
How much weight can a lifting cart handle?
Only what the maker rates it for. The carts in this guide are rated at 330, 500 and 770 lb. Never exceed the rated capacity stated for the cart, and keep the load centered on the platform.
What is the difference between single and double scissor lift carts?
A single scissor cart raises the platform on one set of crossed arms. A double scissor cart stacks two sets of arms, which is how the SPECRAFT, Tera and VEVOR PTS150 carts here reach stated heights of 49.6 to 59 inches. The VEVOR TFD15 states a single scissor design and a 50 inch lift.
How often does lifting gear need to be inspected?
Follow the inspection schedule the maker states for the cart, and check the wheels, locks, scissor frame and hydraulic pump for leaks or damage before each use. Take a cart out of service if a wheel lock, height limiter or overload protection part is damaged, and have it repaired before it carries a load again.
Can a lift table cart move loads across the shop?
Yes. These carts roll on wheels for horizontal transport as well as lifting, and the makers state uses such as material handling and moving loads between work areas. Lower the platform before rolling any distance, lock the wheels when you stop, and keep the load held in place on the platform.
Related: lifting and pressing hub, best lifting dolly, best lifting trolley, best small electric hoist and best lifting chains.
Scoring, line by line
Each cart is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. These manual hydraulic carts state no electrical safety listing and no warranty term, so every cart here scores zero on those two criteria; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SPECRAFT 770 lb Lift Table Cart | 9.7 | 32 | 21 | 21 | n/a | 0 |
| VEVOR TFD15 Lift Table Cart | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Tera 330 lb Lift Table Cart | 9.6 | 29 | 21 | 20 | n/a | 0 |
| VEVOR PTS150 Lift Table Cart | 9.6 | 28 | 20 | 20 | n/a | 0 |
| CAMMOO 500 lb Lift Table Cart | 9.5 | 26 | 20 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




