Best Lever Hoist Under $100 (2026): 5 Picks for the Shop
Best lever hoist under $100: five lever chain hoists compared on capacity, lift, chain grade, brake design and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJET JLP-025A-59.6/10View on Amazon - 2
Highest Capacitykuailebuy 1 Ton Lever Hoist9.6/10View on Amazon - 3
Longest LiftVEVOR 3/4 Ton 20 ft Hoist9.6/10View on Amazon - 4
Best Any-AngleSPECSTAR VH9439.6/10View on Amazon - 5
Best Short PullVEVOR 3/4 Ton 5 ft Hoist9.6/10View on Amazon
A beam needs shifting, an engine needs pulling, or a load needs dragging across the shop floor, and the job calls for a hand tool that holds the load where it is left. This guide covers the best lever hoist under $100: manual lever chain hoists compared on capacity, lift, chain, brake and warranty, from what each maker states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall JET JLP-025A-5: 1/4 ton mini-puller with ANSI/ASME B30.21 compliance, a 125% proof load and a lifetime warranty. Check price on Amazon
- Highest Capacity kuailebuy 1 Ton Lever Hoist: 1 ton, 2205 lbs, with a 10 ft G80 chain and a dual-pawl brake that stops work over the rated load. Check price on Amazon
- Longest Lift VEVOR 3/4 Ton 20 ft Hoist: 3/4 ton with a 20 ft G80 chain, a 360 degree swivel hook and a storage bag in the box. Check price on Amazon
- Best Any-Angle SPECSTAR VH943: One-piece steel shell, drop-forged hooks with latches and a brake that locks loads at any position. Check price on Amazon
- Best Short Pull VEVOR 3/4 Ton 5 ft Hoist: 3/4 ton in a 14.0 lb body with a 5 ft G80 chain and a guided chain device that stops jams. Check price on Amazon
The machines

JET 1/4-Ton Mini-Puller Lever Hoist
A 1/4 ton mini-puller with a 5 ft lift, ANSI/ASME B30.21 compliance, a 125% proof load and a lifetime warranty.
Pros
- States compliance with ANSI/ASME B30.21 and HST-3 standards
- Proof load of 125% of capacity, stated by the maker
- Hooks stretch slowly to show an overload situation
- Needle bearing design for smooth operation
Cons
- 1/4 ton capacity is the smallest here
- 5 ft lift is the smallest lift here
- Does not suit a buyer who needs a 3/4 ton or 1 ton pull
- Compact body suits confined areas, not long reach pulls

kuailebuy Lever Chain Hoist 1 Ton 2205LBS
A 1 ton lever hoist with a 2205 lbs rating, a 10 ft lift and a G80 galvanized chain, the highest capacity here.
Pros
- Highest capacity here: 1 ton, 2205 lbs
- Dual-pawl brake stops work when the load passes the rated capacity
- G80 galvanized manganese steel chain, 3M long
- Free-chain mechanism for quick adjustment, with load drop protection
Cons
- No warranty term is stated
- 10 ft lift is shorter than the 20 ft lift on the VEVOR 20 ft hoist
- Does not suit pulls over 1 ton
- The brake stops work when the load passes the rated capacity, so the rating is a hard limit

VEVOR Manual Lever Chain Hoist
A 3/4 ton lever hoist with a 20 ft G80 chain, a 360 degree rotating handle and a storage bag, the longest lift here.
Pros
- Longest lift here: 20 ft of G80 alloy chain, 6 mm thick
- 360 degree rotating ergonomic handle with a non-slip grip
- Three-position selector switches between lifting, neutral and lowering
- Storage bag included for carrying
Cons
- 3/4 ton capacity is lower than the 1 ton kuailebuy
- 21.25 lb, the heaviest stated weight here
- Does not suit a buyer who needs a 1 ton pull
- Long chain and heavy build suit shop work more than carry-around jobs

SPECSTAR Lever Chain Hoist 3/4 Ton 1650 Lbs
A 3/4 ton lever hoist with a 10 ft G80 manganese chain, a one-piece steel shell and drop-forged hooks with latches.
Pros
- Weston-style dual-pawl brake locks loads at any position
- 360 degree drop-forged hooks with latches
- One-piece steel shell shields the gears from impacts and debris
- Three-position lever with a neutral setting for fast chain adjustment
Cons
- 3/4 ton capacity is lower than the 1 ton kuailebuy
- 24.4 inch length is the longest body here
- Neutral setting adjusts the chain only when unloaded
- 17.4 lb is heavier than the 14.0 lb VEVOR 5 ft hoist

VEVOR Manual Lever Chain Hoist
A 3/4 ton lever hoist with a 1650 lbs rating, a 5 ft lift, a G80 galvanized chain and a 14.0 lb body.
Pros
- 1650 lbs capacity in a small, easy to carry body
- G80 galvanized manganese steel chain for corrosion resistance
- Guided-type leading chain device keeps the pull smooth and free of jams
- Weston dual-pawl brake spreads the load to opposite sides of the gears
Cons
- No warranty term is stated
- 5 ft lift is the smallest lift among the 3/4 ton picks
- 3/4 ton capacity is lower than the 1 ton kuailebuy
- 14.0 lb is heavier than the 4.19 lb JET mini-puller
Spec sheet comparison
| Model | Gear Score | Capacity | Lift | Chain | Brake | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| JET JLP-025A-5 | 9.6/10 | 1/4 ton | 5 ft | Not stated | Weston double pawl | 4.19 lb | Lifetime |
| kuailebuy 1 Ton Lever Hoist | 9.6/10 | 1 ton (2205 lbs) | 10 ft | G80 galvanized, 3M | Dual-pawl, overload stop | Not stated | Not stated |
| VEVOR 3/4 Ton 20 ft Hoist | 9.6/10 | 3/4 ton (1650 lbs) | 20 ft | G80 alloy, 6 mm, galvanized | Weston dual pawl | 21.25 lb | Not stated |
| SPECSTAR VH943 | 9.6/10 | 3/4 ton (1650 lbs) | 10 ft | G80 manganese, black oxide | Weston dual-pawl, locks at any position | 17.4 lb | Not stated |
| VEVOR 3/4 Ton 5 ft Hoist | 9.6/10 | 3/4 ton (1650 lbs) | 5 ft | G80 galvanized manganese | Weston dual-pawl | 14.0 lb | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 22 November 2026. Where a listing states a figure two ways, the table shows both.
Buying guide: the best lever hoist under $100
Capacity and lift
Capacity is the first figure to match to the job. The JET is rated at 1/4 ton, three picks are rated at 3/4 ton and 1650 lbs, and the kuailebuy is rated at 1 ton and 2205 lbs. Lift runs from 5 ft on the JET and the VEVOR 5 ft hoist to 10 ft on the SPECSTAR and the kuailebuy, and 20 ft on the VEVOR 20 ft hoist. Never exceed the rated capacity on the hoist. The kuailebuy brake stops work when the load passes the rated capacity,
Chain: grade, length and finish
Four of these hoists state a G80 chain: the VEVOR pair, the kuailebuy and the SPECSTAR. The VEVOR 20 ft hoist states a 6 mm thick G80 alloy chain, galvanized against corrosion, and the kuailebuy states a 3M G80 galvanized manganese steel chain. The SPECSTAR chain is G80 manganese steel with an oil-treated black oxide finish that resists rust. The JET states no chain grade, so its chain cannot be compared on that point. Match the chain length to the pull: 5 ft, 10 ft or 20 ft, as each listing states.
Brake and hooks
Every pick here states a Weston or dual-pawl brake. The JET brake is a Weston style, double pawl design that splits the load to opposite sides of the ratchet gear, and the maker lists a proof load of 125% of capacity with hooks that stretch slowly to show an overload. The SPECSTAR brake locks loads at any position, and the kuailebuy brake stops work over the rated capacity. Hooks rotate 360 degrees on the JET, the VEVOR 5 ft hoist and the VEVOR 20 ft hoist, and the SPECSTAR uses 360 degree drop-forged hooks with latches. The kuailebuy ships with 2 hooks.
Lifting safety. Never exceed the rated capacity stated on the hoist, and never lift a load over people. Check the hooks, latches and chain before each pull, and keep hands clear of the chain and gears while a load hangs. A brake that stops work over the rating is a limit, not a challenge.
Weight, size and what ships in the box
Stated weights run from 4.19 lb on the JET to 21.25 lb on the VEVOR 20 ft hoist, with the VEVOR 5 ft hoist at 14.0 lb and the SPECSTAR at 17.4 lb. The kuailebuy states no weight. The JET measures 7.87 by 3.54 by 4.13 inches, while the SPECSTAR measures 4.9 by 6.7 by 24.4 inches. The VEVOR 20 ft hoist is the only pick that states a storage bag in the box.
Warranty
Only the JET states a warranty term, a lifetime warranty. The other four listings state no warranty term. A written term matters when the hoist will see daily shop use.
Before You Strike an Arc
- Check the hooks before the first pull: each hook should rotate freely, and the SPECSTAR latches should snap shut.
- On the picks with a three-position selector, work it through lifting, neutral and lowering with no load on the chain, and confirm the brake holds before hanging a load.
- Confirm the rated capacity on the housing matches the job, and never exceed it.
- Check the chain for twists and kinks before each pull, and keep the chain clean and dry between jobs.
- Keep the storage bag from the VEVOR 20 ft hoist with the hoist.
FAQ for welders
What capacity lever hoist do I need?
Capacities here run from 1/4 ton on the JET to 1 ton on the kuailebuy, with three picks rated at 3/4 ton and 1650 lbs. Match the rating to the heaviest load the job will pull, and never exceed it. The kuailebuy brake stops work when the load passes the rated capacity.
How much lift does a lever hoist need?
Lifts here run from 5 ft to 20 ft. The JET and the VEVOR 5 ft hoist carry 5 ft, the SPECSTAR and the kuailebuy carry 10 ft, and the VEVOR 20 ft hoist carries a 20 ft chain. Measure the pull before ordering, since a short chain cannot be stretched to reach.
What does a Weston dual-pawl brake do?
All five picks state a Weston or dual-pawl brake, which splits the load to opposite sides of the ratchet gear and holds the load in place. On the SPECSTAR it locks loads at any position, and on the kuailebuy it stops work when the load passes the rated capacity.
Do any of these hoists state a warranty?
Only the JET states a warranty term, a lifetime warranty. The other four listings state no warranty term. Check the listing before ordering when a written term matters.
Can a lever hoist pull at any angle?
The SPECSTAR states it works at any angle for machinery lifting, engine pulling, cargo tie-down and vehicle recovery. The other listings describe pulls in factories, warehouses, docks and garages without stating an angle. Keep the pull in line with the chain where the listing gives no angle.
Related: best lever hoist, best mini lever hoist, best lever chain hoist, best come along under 100, best lifting chains and best 2 ton engine hoist.
Scoring, line by line
Each hoist is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| JET JLP-025A-5 | 9.6 | 24 | 22 | 19 | 9 | 4 |
| kuailebuy 1 Ton Lever Hoist | 9.6 | 33 | 20 | 21 | 7 | 0 |
| VEVOR 3/4 Ton 20 ft Hoist | 9.6 | 30 | 21 | 22 | 7 | 0 |
| SPECSTAR VH943 | 9.6 | 28 | 21 | 21 | 7 | 0 |
| VEVOR 3/4 Ton 5 ft Hoist | 9.6 | 28 | 20 | 21 | 7 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




