Anti Spatter Spray vs Gel: Which One Should You Buy?
Two anti spatter sprays and two nozzle gels compared on form, size, application, safety claims and warranty, with four examples from the listings we reviewed.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Forney 37031 Nozzle Gel For Mig Welding9.5/10View on Amazon - 2
Stanley AP90 Anti Spatter Spray (1x8.5 Oz.)9.4/10View on Amazon - 3
Made Here Co. Non-Toxic Anti-Spatter Spray9.4/10View on Amazon - 4
Anti Spatter Welding Nozzle Gel9.4/10View on Amazon
Anti spatter spray vs gel verdict: Pick gel if you want the nozzle itself protected: the Forney 37031 is a 16 oz silicone-free gel with a 90-day warranty, and the jhtii 7 oz bottle dips the tip with no overspray. Pick spray if you want to coat nozzles plus the surrounding work: the Made Here Co. 14 oz air-powered spray is non-toxic, and the Stanley AP90 covers MIG, TIG and arc from 8-10 inches.
Spatter on the nozzle starts plenty of bad arcs. It builds up, the wire feeds rough, and you stop to scrape the tip instead of welding. The anti spatter spray vs gel question is about how you keep that spatter off: spray it on, or dip the nozzle in gel. This comparison puts two sprays and two gels side by side on what each listing states, then scores all four.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The four examples

Forney 37031 Nozzle Gel For Mig Welding
A 16 oz silicone-free nozzle gel that films MIG nozzles and contact tips without clogging orifices, backed by a 90-day warranty.
Pros
- 16 oz jar, the largest size here
- Film will not clog orifices or threads on MIG nozzles and contact tips
- Odorless, non-flammable, non-toxic and silicone free
- 90 day warranty against manufacturer defects
Cons
- Suits nozzles and contact tips, not wide-area surface coating
- No coverage or reapplication figures in the listing
- Jar format means dipping the nozzle rather than spraying
- 90-day warranty is a short term

Stanley AP90 Anti Spatter Spray (1x8.5 Oz.)
An 8.5 oz silicone-based anti-spatter spray for MIG, TIG and arc tips and nozzles, non-flammable once dry.
Pros
- Covers MIG, TIG and arc tips, nozzles and surrounding surfaces
- Non-flammable after the solvent dries
- Sprays from 8-10 inches for fast application
- Suited to manual, automatic and robotic setups per the listing
Cons
- Silicone-based formula; silicone residue is a porosity concern for some welds
- 8.5 oz is the smallest spray can here
- No warranty term stated
- Part number reads 12oz against the 8.5 oz title and spec volume

Made Here Co. Non-Toxic Anti-Spatter Spray
A 14 oz non-toxic, air-powered anti-spatter spray for MIG, TIG and stick, made in the USA.
Pros
- Non-toxic formula with no harmful propellants
- Air-powered bag-on-valve can for even coverage
- 14 oz, the largest spray here
- Made in the USA
Cons
- No warranty term stated
- No flammability statement in the listing
- Listing leans on marketing language over specs
- Can format cannot dip a nozzle like gel

Anti Spatter Welding Nozzle Gel
A 7 oz silicone-free nozzle gel for dipping MIG tips, stated for flat, vertical and overhead work.
Pros
- Silicone free, odorless, non-toxic and non-flammable
- No dripping at high welding temperature, per the listing
- Stated for flat, vertical and overhead MIG
- Dip application with no overspray
Cons
- No warranty term stated
- 7 oz bottle is the smallest quantity here
- Petroleum jelly base per the spec table
Other welders and gear to compare
Akfix A90 Anti Spatter Welding SprayCheck price on Amazon
Kraken Bond Anti Spatter Welding SprayCheck price on Amazon
Anti Spatter Welding Spray for TIG and MIGCheck price on Amazon
Stanley AP90 Anti Spatter SprayCheck price on Amazon
Side by side
| Product | Gear Score | Type | Size | Notable | Warranty |
|---|---|---|---|---|---|
| Forney 37031 Nozzle Gel | 9.5/10 | Gel | 16 oz | Won’t clog orifices; 90-day warranty | 90 day |
| Stanley AP90 Spray | 9.4/10 | Spray | 8.5 oz | Non-flammable after drying | Not stated |
| Made Here Co. Spray | 9.4/10 | Spray | 14 oz | Non-toxic, air-powered | Not stated |
| jhtii Nozzle Gel | 9.4/10 | Gel | 7 oz | All-position, no-drip (maker stated) | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 19 October 2026. Two listings disagree with their own spec tables on size; the reviews below call out both.
Anti spatter spray vs gel: how they differ
Spray coats. Gel dips. The two sprays here go on with a shake and a pull of the trigger: Stanley says spray from 8-10 inches, Made Here Co. says shake and spray, no prep. The two gels go on the nozzle itself: Forney’s film coats MIG nozzles and contact tips, and jhtii says dip the tip before welding. That is the real split. Spray covers the nozzle, the tip and the work around the weld. Gel protects the nozzle and tip only, with no overspray from a spray can.
Application and coverage
For broad work, spray wins on speed. Stanley pitches its spray at manual welding, automatic systems and robotic setups, and Made Here Co. lists MIG, TIG and stick. One pass coats the nozzle and the surrounding surface, which matters when spatter lands past the tip. For the nozzle itself, gel is the targeted tool. Forney’s gel forms a film that will not clog orifices or threads, and suits semi and automatic welders. jhtii’s gel goes on by dipping, with no dripping at high temperature, and the listing states flat, vertical and overhead MIG. Neither gel listing claims to coat surrounding surfaces, and neither spray listing claims the precision of a dip.
Safety and formula claims
Read the formula before you buy. Stanley’s spray is silicone-based and states non-flammable only after the solvent dries. Made Here Co. states a non-toxic formula with compressed air instead of propellants. Forney’s gel is odorless, non-flammable, non-toxic and silicone free, and states it will not cause porosity. jhtii’s gel is also silicone free, odorless, non-toxic and non-flammable, and states its formula eliminates porosity from silicone residue. The silicone split matters: two makers formulate around it, one embraces it. None of the four listings states a CSA, UL or ETL listing.
Size and the two contradictions
Sizes run 7 to 16 oz on paper. Forney’s gel is 16 oz, the largest here. Made Here Co.’s spray is 14 oz. Stanley’s spray is 8.5 oz by title and spec volume. jhtii’s bottle is 7 oz by title and bullets. Two listings need a footnote. Stanley’s part number reads 12oz against the 8.5 oz title and spec volume; the title and spec table agree, so 8.5 oz stands. jhtii’s spec table says 1 ounce against the 7 oz title and bullets; again the title and bullets win, so 7 oz stands. Neither listing states coverage per ounce, so the size comparison ends at the can.
Choose anti spatter spray if
- You coat nozzles, tips and the work around the weld in one pass.
- You run TIG or stick as well as MIG: both sprays list more than MIG.
- You want the non-toxic, air-powered can: Made Here Co.
- You want one spray for manual, automatic and robotic setups: Stanley.
Choose gel if
- You protect the nozzle and contact tip with a dip, no overspray.
- You weld overhead or vertical and want no dripping: jhtii states both.
- You want a written warranty: Forney’s 90-day term is the only one here.
- You want silicone-free with a no-porosity statement: Forney.
Before You Strike an Arc
- Match the product to the process: the gels are MIG-nozzle products, while the sprays list MIG, TIG and stick or arc.
- Check the can against the listing on arrival: two listings here disagree with their own spec tables on size.
- Ventilate the work area and keep ignition sources clear until any carrier solvent has flashed off; Stanley states non-flammable only after drying.
- If porosity is a rejectable defect on your job, note which listings state silicone-free and a no-porosity claim.
FAQ for welders
Should I use spray or gel on a MIG nozzle?
Both work on the nozzle. Gel is the targeted option: Forney films the nozzle and contact tip without clogging orifices, and jhtii dips the tip with no overspray. Spray is the broad option: it coats the nozzle, tip and surrounding surface in one pass. Pick gel for the nozzle alone, spray when spatter lands past it.
Is silicone anti-spatter a problem for weld quality?
Two makers treat it as one. Forney’s gel is silicone free and states it will not cause porosity; jhtii’s gel is silicone free and states its formula eliminates porosity from silicone residue. Stanley’s spray is silicone-based. Those are the makers’ statements; none of the listings publishes measured results.
Can I use anti-spatter spray for TIG?
The Stanley listing names TIG among its uses, and Made Here Co. lists TIG and stick alongside MIG. The gel listings describe MIG nozzles and contact tips only. For TIG work, the sprays are the stated option here.
Does any of these have a warranty?
Forney states a 90 day warranty against manufacturer defects. The other three listings state no warranty term.
How do you apply the gel?
Dip the contact tip in the gel before welding, per the jhtii listing; Forney describes a film applied to MIG nozzles and contact tips. Reapply as the film burns off between welds.
Related: welding consumables, flux core vs MIG, MIG welding best practices and gas MIG vs gasless flux core.
Scoring, line by line
All four are scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a CSA, UL or ETL listing, so safety scores are 0 across the board; Forney’s 90-day warranty is the only written warranty term among the four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Forney 37031 Nozzle Gel | 9.5 | 29 | 20 | 21 | 0 | 3 |
| Stanley AP90 Spray | 9.4 | 29 | 20 | 20 | 0 | 0 |
| Made Here Co. Spray | 9.4 | 28 | 20 | 20 | 0 | 0 |
| jhtii Nozzle Gel | 9.4 | 28 | 19 | 20 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




