3M 2091 vs 2097 Filter: Which One Should You Buy?
The 3M 2091 and 2097 are both P100 particulate filters, but the 2097 adds organic vapor relief and ships as 4 filters while the 2091 listing states a 2 count pack.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
3M 2097 P100 Particulate Filter with Organic Vapor9.6/10View on Amazon - 2
3M particulate filters P100 #2091/07000 , Pink9.5/10View on Amazon
Verdict. In this 3m 2091 vs 2097 filter comparison, the 3M 2097 is the pick for welders who want organic vapor relief on top of P100 particulate filtration, with 4 filters in the listing against the 2091 title’s 2 count. The 3M 2091 is the pick when the job is non-oil based particulates only and the NIOSH Approved line in its bullets matters, but its listing contradicts itself on count and weight, so confirm the pack before you buy.
Grinding dust hangs in the shop air, and a weld on painted or coated steel throws up fume that calls for a respirator with the right filters, not a paper mask. That is when a welder reaches for a respirator and the filters that lock onto it. This comparison puts the 3m 2091 vs 2097 filter side by side on what each listing states, so you can see which one fits the work on your bench.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The two filters

3M 2097 P100 Particulate Filter with Organic Vapor
A P100 particulate filter with organic vapor relief, sold as 2 pairs (4 filters), for use with 3M half and full face piece designs.
Pros
- P100 particulate filtration with organic vapor relief in the title
- 4 filters in the listing, 2 pairs
- Fits 3M half and full face piece designs, per the bullets
- Organic vapor relief in the title, which the 2091 listing does not state
Cons
- No warranty term is stated
- No weight is stated in the listing
- The listing states no NIOSH approval line, only the P100 class in its title
- Size is listed as Full Size with no fit guidance beyond the facepiece line

3M particulate filters P100 #2091/07000 , Pink
A pink P100 particulate filter for non-oil based particulates, NIOSH Approved, listed as a 2 count pack in the title.
Pros
- NIOSH Approved, stated in the bullets
- P100 filtration for non-oil based particulates
- Pink color, stated in the listing, sets it apart from the purple 2097
- P100 class matches the 2097 for particulate filtration
Cons
- Title says 2 Count, table says NumberOfItems 1
- Bullets say 1 lb, table says 0.01 pounds
- Warranty description reads As Labeled, with no term stated
- No organic vapor relief is stated, unlike the 2097
Other welders and gear to compare
3M Performance P100 Particulate + Odor FiltersCheck price on Amazon
3M 2091 P100 Particulate FilterCheck price on Amazon
3M Performance Filter P100 ParticulateCheck price on Amazon
3M 2091 Particle FilterCheck price on Amazon
3M PARTICULATE Filter 2096Check price on Amazon
3m 2091 vs 2097 filter side by side
| 3M 2097 | 3M 2091 | ||
|---|---|---|---|
| Gear Score | 69 | 64 | |
| Filter class | P100 with organic vapor relief | P100, non-oil based particulates | |
| Organic vapor relief | Stated in the title | Not stated | |
| Pack | 2 Pairs (4 Filters) | 2 Count (title), 1 item (table) | |
| Color | Purple | Pink | |
| Size | Full Size | One Size | |
| Facepiece | Half and full face piece designs | Not stated | |
| Dimensions | 6.0 x 7.3 x 1.5 inches | 7.0 x 5.1 x 1.0 inches (table) | |
| Weight | Not stated | 1 lb (bullets), 0.01 pounds (table) | |
| Standards | Not stated | NIOSH Approved | |
| Warranty | Not stated | As Labeled, no term stated |
All specs here repeat what the maker rates and the listing prints, copied down 8 November 2026. Neither listing states a warranty term, and the 2091 listing disagrees with itself on count and weight.
P100 filtration and organic vapor relief
Both listings state P100 particulate filtration, so both sit in the same particulate class. The 2091 bullets narrow it to non-oil based particulates and add NIOSH Approved, a line the 2097 listing does not carry. The 2097 title adds organic vapor relief, which the 2091 listing does not state. That relief is the one clear split between the two sides: the 2097 is the listing that states organic vapor relief alongside P100 filtration, and the 2091 listing states particulate filtration only.
Pack size and count
The 2097 listing is clear: 2 pairs, 4 filters, with NumberOfItems 4 in its table. The 2091 listing is not: its title says 2 Count and its table says NumberOfItems 1. Trust the title and bullets over the table, so count on 2 filters in the 2091 pack. That leaves the 2097 as the larger pack, with 4 filters against 2, which matters when you keep spares on the shelf and swap filters often.
Color, size and weight
The two filters are easy to tell apart by color: the 2091 is pink and the 2097 is purple, both stated in their tables. The 2091 is listed as One Size at 7.0 x 5.1 x 1.0 inches, with package dimensions of 3.048 x 15.24 x 11.938 centimeters in its bullets. The 2097 is listed as Full Size at 6.0 x 7.3 x 1.5 inches. Weight is where the 2091 listing trips again: its bullets put the product weight at 1 lb while its table says 0.01 pounds. The 2097 listing states no weight at all, so there is no weight comparison to make between the two.
Facepiece fit
The 2097 bullets say it can be used with 3M’s wide variety of half and full face piece designs, which covers both half masks and full face pieces. The 2091 listing names no facepiece at all, so fit comes down to the facepiece you already own and the filters it takes. Check the facepiece maker’s fit guidance before you buy either filter, and check that each filter seats fully on the facepiece when it arrives.
Choose the 3M 2097 if
- You want organic vapor relief with P100 particulate filtration.
- You want 4 filters in one listing.
- Your facepiece is a 3M half or full face piece design.
- You can live without a stated warranty term.
Choose the 3M 2091 if
- Your work is non-oil based particulates only.
- The NIOSH Approved line in the listing matters to you.
- You want the pink filter that stands apart from the purple 2097.
- You can live with a listing that disagrees with itself on count and weight.
FAQ for welders
What is the difference between the 3M 2091 and 2097 filters?
Both are P100 particulate filters. The 2097 adds organic vapor relief and comes as 4 filters in its listing, while the 2091 is listed as a 2 count pack for non-oil based particulates with NIOSH Approved in its bullets.
Can the 2097 filter be used on a half mask respirator?
The bullets say the 2097 can be used with 3M’s wide variety of half and full face piece designs. The 2091 listing names no facepiece, so check the facepiece maker’s guidance for that filter.
How many filters come in the 2091 pack?
The title says 2 Count, but the spec table says NumberOfItems 1. Trust the title over the table and count on 2 filters, and confirm the count with the seller before you buy.
Is the 3M 2091 NIOSH Approved?
The bullets state NIOSH Approved for the 2091. The 2097 listing states no NIOSH approval line, only the P100 class in its title.
Which filter should a welder pick for fume with organic vapor?
Of these two listings, the 2097 is the one that states organic vapor relief alongside P100 particulate filtration. The 2091 listing states particulate filtration for non-oil based particulates only. Neither listing states a warranty term.
Related: respirator cartridge vs filter, full face vs half mask respirator welding, respirator vs dust mask for welding, and welding fume extractor vs respirator.
Scoring, line by line
Both filters are scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. The 2097 scores higher on performance and value: it adds organic vapor relief to the same P100 class and packs 4 filters against 2. The 2091 scores on the strength of its stated NIOSH Approved line, but its contradictions on count and weight hold its value score down. Neither listing states a warranty term, so neither earns warranty points.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| 3M 2097 | 9.6 | 29 | 20 | 21 | 7 | 0 |
| 3M 2091 | 9.5 | 27 | 20 | 19 | 7 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.
Before you strike an arc. Check that each filter seats fully on your facepiece and that the facepiece seals on your face before you weld. Keep the filters dry between jobs, and keep spares on hand so a damaged filter never stays in use. Work with ventilation that moves fume away from your breathing zone, and keep a fire watch on hot work. See the OSHA welding overview.




