Types of Ground Clamps: Which One to Buy
Brass T-style, A-shape and spring ground clamps differ in jaw shape, amp rating and cable fit, and the right one matches the welder and the work in front of it.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Aurikon 300 Amp Brass Welding Ground Clamp9.5/10View on Amazon - 2
Chazcool 260/500A Welding Ground Clamp (500A)9.5/10View on Amazon - 3
Vaphy 300-Amp T-Style Welding Ground Clamp Brass9.5/10View on Amazon - 4
Bolsen 2pcs 300A/500A/800A Earth Ground Cable Clip9.4/10View on Amazon
A weld is only as good as its ground. When the clamp bites clean metal and holds through the bead, the arc stays steady and the puddle behaves. When it slips or loses contact, the arc sputters and the bead goes cold. Types of ground clamps differ in jaw shape, spring tension and how they grip the cable, and the right one matches the welder and the work in front of it.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Aurikon 300 Amp Brass Welding Ground Clamp
A 300A brass clamp pair that states its cable fit and jaw opening, with a spring, serrated jaws and the hardware to fit the cable in the box.
Pros
- Rated 300A and fits welding cables up to 1/0 AWG
- Heavy-duty spring and serrated jaws hold a firm grip
- D-shaped jaw bridges over lips and obstacles
- Includes 2 Allen wrenches and 2 ferrules for fitting the cable
Cons
- 1.18 inch jaw opening is narrower than the 1-3/4 inch Vaphy jaw
- 5.43 inch body is shorter than the 7 inch Vaphy body
- No warranty term is stated
- Ferrules and Allen wrenches are small parts to keep track of in a busy shop

Chazcool 260/500A Welding Ground Clamp (500A)
A 500A forged brass A-shape clamp, the highest rating here, in a small single-clamp pack.
Pros
- Highest rating here at 500A
- Forged brass body with good conductivity
- Small size and light weight for carrying to the job
- Suits argon arc, submerged arc, resistance and stud welding
Cons
- One clamp in the box, so a second ground needs another order
- No jaw opening is stated
- No warranty term is stated
- No cable size is stated, so the fit must be checked on arrival

Vaphy 300-Amp T-Style Welding Ground Clamp Brass
A 300A brass T-style clamp pair with a 7 inch body and a 1-3/4 inch jaw opening, the widest jaw stated here.
Pros
- 1-3/4 inch jaw opening, the widest stated here
- 7 inch long body with a large surface area for the cable connection
- Brass build, sturdy and durable per the maker
- 2-pack covers two ground leads or a spare
Cons
- No cable size is stated, so the fit must be checked on arrival
- No spring tension detail is stated
- 7 inch body is the longest here and needs more room in a tool bag
- T-style jaw has no D-shape to bridge over lips and edges

Bolsen 2pcs 300A/500A/800A Earth Ground Cable Clip
A 300A two-pack clip clamp with a non-slip ergonomic handle and a grounding conductive tape, listed for MIG, MMA, TIG and ARC.
Pros
- Non-slip ergonomic handle with a comfortable grip
- Grounding conductive tape for a reliable connection
- Listed for MIG, MMA, TIG and ARC welding
- 2-pack at 300A covers two leads or a spare
Cons
- No jaw opening is stated
- No cable size is stated
- No dimensions are stated
- Body material is not stated
Types of Ground Clamps
The clamps in this guide cover the common shapes: a T-style brass clamp, an A-shape forged brass clamp, a spring clamp with serrated jaws, and an alligator-style clip clamp. The T-style Vaphy opens to 1-3/4 inch, the widest jaw stated here, while the Aurikon spring clamp opens to 1.18 inch and adds a D-shaped jaw that bridges over lips and obstacles. Amp ratings are 300A on the Vaphy, Aurikon and Bolsen, with the Chazcool A-shape (on Amazon) rated 500A. Only the Aurikon states a cable fit, up to 1/0 AWG.
Side by side
| Clamp | Rated amps | Jaw opening | Cable fit | Pack | Gear Score |
|---|---|---|---|---|---|
| Aurikon 300A Brass 2-Pack | 300A | 1.18 in | Up to 1/0 AWG | 2 | 9.5/10 |
| Chazcool 500A A-Shape | 500A | Not stated | Not stated | 1 | 9.5/10 |
| Vaphy 300A T-Style 2-Pack | 300A | 1-3/4 in | Not stated | 2 | 9.5/10 |
| Bolsen 300A 2-Pack | 300A | Not stated | Not stated | 2 | 9.4/10 |
Jaw opening and cable fit are the two figures to check before ordering: a clamp that cannot open wide enough for the work or take the cable size on the lead is the wrong clamp whatever its amp rating. The amp rating is the maker ceiling for the clamp, so pick one rated at or above the amps the welder runs.
Ground Clamps for Your Welder
The clamp is the last link between the welder and the work, so it needs to bite the piece and hold the cable before the arc starts, and these four cover the common shapes, ratings and pack sizes.
How to Pick the Right Ground Clamp
Start with the amp rating and the cable on the lead, then check the jaw against the work.
- Match the amps. A 300A clamp suits a welder that runs at or under that rating; the 500A Chazcool is the pick here for higher-amp work.
- Check the jaw opening. The Vaphy opens to 1-3/4 inch and the Aurikon to 1.18 inch; the other two state no opening, so measure the work first.
- Check the cable fit. The Aurikon takes cables up to 1/0 AWG. If the lead is thicker, it will not fit the clamp.
- Count the pack. The Vaphy, Aurikon and Bolsen come as 2-packs; the Chazcool is a single clamp.
- Look at what is in the box. The Aurikon includes 2 Allen wrenches and 2 ferrules for fitting the cable; the others list no fitting hardware.
FAQ for welders
What is a welding ground clamp?
It is the clamp that connects the ground lead from the welder to the workpiece, completing the circuit so the arc can strike. A good ground clamp bites clean metal and holds through the whole bead. The Vaphy, Aurikon and Chazcool state brass bodies, while the Bolsen states no material.
What amp rating does a ground clamp need?
Match the rating to the welder. The Vaphy, Aurikon and Bolsen are rated 300A and the Chazcool is rated 500A. The rating is the maker ceiling for the clamp, so pick one rated at or above the amps the welder runs.
How wide should the jaw opening be?
Wide enough to bite the edge or section being welded. The Vaphy opens to 1-3/4 inch, the widest opening stated here, and the Aurikon opens to 1.18 inch. The Chazcool and Bolsen state no jaw opening, so confirm the opening with the maker before ordering if the work is thick.
What size cable fits a ground clamp?
It depends on the clamp. The Aurikon fits welding cables up to 1/0 AWG and includes ferrules for the connection. The other three state no cable size, so confirm the cable fit with the maker before ordering.
Do ground clamps wear out?
The spring and the jaws take the wear: a tired spring loses its bite and pitted jaws lose contact. The Aurikon states a heavy-duty spring and serrated jaws, and the Bolsen states a non-slip handle and conductive tape. Keep the contact faces clean and check the bite before striking an arc.
Related: types of ground clamps in the welding consumables section, types of metal clamps, best 2 AWG welding cable, and best welding cable 1/0 AWG.




