Thoriated vs Ceriated Tungsten: Which One Should You Buy?
The red 2% thoriated electrodes and the gray 2% ceriated electrode compared on size, pack, current use, packing and what each listing leaves unclear.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Midwest Tungsten Service Red 1/8" TIG Tungsten9.6/10View on Amazon - 2
YESWELDER TIG Welding Tungsten Electrode 2%9.6/10View on Amazon - 3
Midwest Tungsten Service Red 1/16" TIG Tungsten9.6/10View on Amazon
Verdict. Pick thoriated when your TIG work is DC on copper alloys, nickel alloys, titanium alloys or non-corroding steels, which is exactly what the two Midwest Tungsten listings describe. Pick ceriated when you need one electrode the listing rates for AC or DC, and for DC work at low current, which is the YESWELDER listing’s stated strength.
Tungsten choice comes up fast when you set up a TIG torch: the thoriated vs ceriated tungsten question is really about which current you run and which metals you weld. Here the two sides show up as three listings: two red 2% thoriated 10-packs from Midwest Tungsten Service, in 1/8 in and 1/16 in, and one gray 2% ceriated pack from YESWELDER, in 3/32 in by 7 in. This comparison lays out what each listing states so you can match the electrode to the job on your bench.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The three products

Midwest Tungsten Service Red 1/8" TIG Tungsten
A 10-pack of red 1/8 in 2% thoriated TIG electrodes (WT20/EWTh-2) described for DC work on copper, nickel and titanium alloys and non-corroding steels, with AWS A5.12M/A5.12:2036 conformance stated.
Pros
- 2% thoriated WT20/EWTh-2 in a red 10-pack, the largest diameter here at 1/8 in
- Listing states exceptional use for DC applications, including copper, nickel and titanium alloys
- States US manufacturing plus a free MSDS and certificate of conformance
- AWS A5.12M/A5.12:2036 conformance stated on the listing
Cons
- No warranty term is stated
- Listing states DC applications only; AC is not mentioned
- Packaging of the electrodes is not described
- No electrode length is stated

YESWELDER TIG Welding Tungsten Electrode 2%
A gray 2% ceriated TIG electrode pack (WC20/EWCe-2), 3/32 in by 7 in, stated for AC or DC use with best performance in DC at low current, vacuum packed.
Pros
- 2% ceriated WC20/EWCe-2 with a minimum of 97.30% tungsten and 1.80 to 2.20% cerium stated
- Stated for AC or DC, performing best in DC at low current settings
- Vacuum packing stated, with color-coded outer packaging to tell models apart
- AWS A5.12M/A5.12:2009 conformance stated
Cons
- No warranty term is stated
- Only one size stated: 3/32 in by 7 in
- No stated guidance on which metals or thicknesses it suits

Midwest Tungsten Service Red 1/16" TIG Tungsten
A 10-pack of red 1/16 in 2% thoriated TIG electrodes (WT20/EWTh-2) described for DC work on copper, nickel and titanium alloys and non-corroding steels, with AWS A5.12M/A5.12:2036 conformance stated.
Pros
- 2% thoriated WT20/EWTh-2 in red, the smallest diameter here at 1/16 in
- Listing states exceptional use for DC applications, including copper, nickel and titanium alloys
- States US manufacturing plus a free MSDS and certificate of conformance
- AWS A5.12M/A5.12:2036 conformance stated on the listing
Cons
- No warranty term is stated
- Listing states DC applications only; AC is not mentioned
- Table lists two different model numbers: 40400-allTIG and Ad-bm1-14305
- Table dimensions of 0.39 x 0.39 x 0.5 in do not match a 1/16 in electrode; title and bullets control
Other welders and gear to compare
TIG Welding Tungsten Electrodes 2% Thoriated .040" x 7"Check price on Amazon
CK T3327GT2 2% Thoriated Tungsten Electrode 3/32" X 7"Check price on Amazon
Pre-Ground TIG Tungsten Sharpened Electrodes Red 2% ThoriatedCheck price on Amazon
TIG Welding Electrodes 2% Thoriated WT20Check price on Amazon
Side by side
| Midwest Tungsten 1/8 in 2% Thoriated | YESWELDER 3/32 in 2% Ceriated | Midwest Tungsten 1/16 in 2% Thoriated | |
|---|---|---|---|
| Verdict | Top pick | Ceriated pick | Fine-diameter pick |
| Side | Thoriated (WT20/EWTh-2) | Ceriated (WC20/EWCe-2) | Thoriated (WT20/EWTh-2) |
| Diameter | 1/8 in | 3/32 in | 1/16 in |
| Length | Not stated | 7 in | Not stated |
| Pack | 10 per title and bullets | 10 per title and bullets (table says 1) | 10 per title and bullets |
| Color band | Red | Gray | Red |
| Stated standard | AWS A5.12M/A5.12:2036 | AWS A5.12M/A5.12:2009 | AWS A5.12M/A5.12:2036 |
| Stated current use | DC applications | AC or DC; best in DC at low current | DC applications |
| Item weight | 10.2 oz | 6.4 oz | 5.6 oz |
| Packing | Not stated | Vacuum packing | Not stated |
| First listed | May 12, 2016 | December 17, 2018 | August 7, 2015 |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 20 October 2026. None of the three listings states a warranty term or a duty cycle, so those have no rows in the table.
Thoriated vs Ceriated Tungsten: Which Side Fits
The split is in the chemistry and the current. Both thoriated listings are 2% thoriated, coded WT20/EWTh-2, red banded, and both describe DC applications: copper alloys, nickel alloys, titanium alloys and non-corroding steels. The ceriated listing is 2% ceriated, coded WC20/EWCe-2, gray banded, with a minimum of 97.30% tungsten and 1.80 to 2.20% cerium stated, and it is the only one of the three that states AC or DC use. It adds that it performs best in DC welding at low current settings.
The listings give no shared head-to-head spec beyond that, so this is a case of matching the stated current to your machine. If you weld DC only and work the alloys the Midwest listings name, the thoriated 10-packs describe your job directly. If you switch between AC and DC, or do low-current DC work, the ceriated listing is the one that names your use.
Size and pack
The thoriated side comes in two diameters: the Midwest 1/8 in 10-pack at 10.2 ounces item weight, and the 1/16 in 10-pack at 5.6 ounces. The ceriated side is one size: 3/32 in by 7 in, 6.4 ounces item weight, with the title and bullets calling it a 10-pack while the specification table answers 1 for both package quantity and number of pieces. Where a listing disagrees with itself, the title and bullets win: read it as a 10-pack and confirm with the seller if the count matters to your order.
Standards and paperwork
All three listings claim AWS conformance: the Midwest thoriated packs cite A5.12M/A5.12:2036, the YESWELDER ceriated pack cites A5.12M/A5.12:2009. The Midwest listings go further with free MSDS and certificate of conformance links and stated US manufacturing. The YESWELDER listing’s extras are practical: vacuum packing to prevent oxidation and color-coded outer packaging so you can tell models apart at a glance.
Choose thoriated if
- You TIG weld on DC and work copper alloys, nickel alloys, titanium alloys or non-corroding steels, which the thoriated listings name directly.
- You want the choice of 1/8 in or 1/16 in in a stated 10-pack.
- Free conformance paperwork and stated US manufacturing matter to your shop.
- The red band matches how your bench is already organized.
Choose ceriated if
- You need an electrode the listing rates for AC or DC.
- Much of your DC work runs at low current, where the listing says this electrode performs best.
- Vacuum packing and color-coded packaging matter for storage and quick identification.
- 3/32 in by 7 in is the size your torch is set up for.
Before You Strike an Arc
- Match the electrode diameter to the collet and collet body in your torch; a 3/32 in electrode does not belong in a 1/8 in collet.
- Set the current type the listing states: DC for the thoriated packs, AC or DC for the ceriated pack.
- Grind the tip lengthwise if your shop practice calls for a point, keeping the grind marks along the electrode axis.
- Inspect new electrodes on arrival for chips, cracks or heavy oxidation, and store them dry; the vacuum pack on the ceriated pack helps until it is opened.
- Keep the AWS conformance paperwork the Midwest listings offer with your shop records.
FAQ for welders
What is the difference between thoriated and ceriated tungsten electrodes?
In these listings, the thoriated electrodes are 2% thoriated WT20/EWTh-2 with a red band, described for DC applications on copper, nickel and titanium alloys and non-corroding steels. The ceriated electrode is 2% ceriated WC20/EWCe-2 with a gray band, stated for AC or DC use and for DC at low current. The listings give no other performance comparison between the two chemistries.
Can ceriated tungsten electrodes run on AC?
Yes, according to the YESWELDER listing: it states the 2% ceriated electrodes can be used in AC or DC processes, and that they perform best in DC welding at low current settings. Neither thoriated listing mentions AC.
What do the red and gray bands mean?
The red band marks the 2% thoriated electrodes and the gray band marks the 2% ceriated electrode in these listings. Color coding lets you tell the chemistry apart at a glance, which is also why the YESWELDER listing adds color-coded outer packaging.
How many electrodes come in each pack?
All three listings describe 10-packs in their titles and bullets. The YESWELDER specification table answers 1 for package quantity and number of pieces, which contradicts the title and bullets; the title and bullets take precedence, but confirm with the seller before ordering if the count matters.
Do these electrodes come with conformance paperwork?
The Midwest Tungsten listings state a free MSDS and certificate of conformance are linked on the listing, and that the electrodes adhere to AWS A5.12M/A5.12:2036. The YESWELDER listing states conformance to AWS A5.12M/A5.12:2009 but does not mention a certificate or MSDS.
Related: pure tungsten vs lanthanated tungsten, pure tungsten vs ceriated tungsten, 1/16 vs 1/8 tungsten electrode, and best shielding gas for TIG welding.
Scoring, line by line
Each electrode is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Midwest Tungsten 1/8 in 2% Thoriated | 9.6 | 29 | 21 | 21 | n/a | 0 |
| YESWELDER 3/32 in 2% Ceriated | 9.6 | 29 | 20 | 21 | n/a | 0 |
| Midwest Tungsten 1/16 in 2% Thoriated | 9.6 | 28 | 20 | 21 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




