Best Type 27 Abrasive Wheel (2026): 5 Picks Compared
Five Type 27 abrasive wheels compared on diameter, thickness, arbor, rated RPM and pack count, from thin cut-off wheels to a grinding wheel.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallUnited Abrasives 220539.6/10View on Amazon - 2
Highest Rated SpeedPFERD SG Steel 631149.6/10View on Amazon - 3
Best Grinding WheelUnited Abrasives 200799.6/10View on Amazon - 4
Best for StainlessPearl DCW06A Slimcut-409.5/10View on Amazon
Cutting a bracket off a frame or trimming stock to length on the bench calls for a wheel that fits the grinder and matches the metal. The best type 27 abrasive wheel for the job depends on diameter, thickness, arbor and rated speed, and this roundup compares wheels on those stated figures plus pack count.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall United Abrasives 22053: 7 x .045 inch cut-off wheel, 50-pack, 8,500 max RPM. Check price on Amazon
- Highest Rated Speed PFERD SG Steel 63114: 13,300 RPM stated on a 4-1/2 inch Type 27 wheel. Check price on Amazon
- Best Grinding Wheel United Abrasives 20079: 6 x 1/4 inch grinding wheel, 10,200 max RPM, 25-pack. Check price on Amazon
- Best for Stainless Pearl DCW06A Slimcut-40: Contaminant free stated, grit A46, 10,200 max RPM. Check price on Amazon
The machines

United Abrasives-SAIT 22053 A60S General Purpose
A 7 by .045 inch Type 27 cut-off wheel in a 50-pack, rated at 8,500 max RPM for right-angle grinders.
Pros
- 50-pack of 7 inch cut-off wheels
- 7/8 inch arbor fits right-angle grinders
- Internal fiberglass reinforcement stated
- Made in the USA stated
Cons
- 8,500 max RPM is the lowest stated here
- 7 inch diameter needs a matching grinder
- No warranty term is stated
- Cut-off wheel only, not for grinding

PFERD SG Steel Type 27 Cut-Off Wheel
A 4-1/2 by 3/32 inch Type 27 cut-off wheel rated at 13,300 RPM, in a pack of 10.
Pros
- 13,300 RPM stated, highest here
- Type 27 design for thin sheet and hollow sections
- Aluminum oxide A abrasive stated
- Pack of 10 wheels
Cons
- 5/8 inch-11 mount, not a 7/8 inch arbor
- 3/32 inch thickness is thicker than .040 wheels
- No warranty term is stated
- Smaller pack than the 50-packs here

United Abrasives-SAIT20079 A24R General
A 6 by 1/4 inch Type 27 grinding wheel for ferrous metals, rated at 10,200 max RPM, in a 25-pack.
Pros
- 1/4 inch grinding wheel for stock removal
- 10,200 max RPM stated
- Internal fiberglass reinforcement stated
- 25-pack, Made in the USA stated
Cons
- Grinding wheel only, not for cutting
- 6 inch diameter needs a matching grinder
- No warranty term is stated
- Heaviest wheel here at 0.68 pounds

5-PK Pearl Abrasive DCW06A Slimcut-40 Cut-Off
A 6 by .040 inch Type 27 cut-off wheel, contaminant free, rated at 10,200 max RPM, in a 5-pack.
Pros
- Contaminant free stated at Fe + S + Cl under 0.1%
- 10,200 max RPM stated
- Grit A46 stated for stainless and sheet metals
- Thin .040 inch cut-off wheel
Cons
- Smallest pack here at 5 wheels
- 6 inch diameter needs a matching grinder
- No warranty term is stated
- Cut-off wheel only, not for grinding

Benchmark Abrasives Grinder Cut Off Wheels 4 1/2
A 4-1/2 by .040 inch Type 27 cut-off wheel with 7/8 inch arbor, in a 50 pack.
Pros
- 50 pack of 4-1/2 inch cut-off wheels
- 7/8 inch arbor for common angle grinders
- Thin .040 inch wheel for metal cutting
- ANSI and EU standards stated by the maker
Cons
- No max RPM figure is stated
- No warranty term is stated
- Cut-off wheel only, not for grinding
- Wheel weight stated at 0.1 pounds
Spec sheet comparison
| Model | Gear Score | Size | Max RPM | Type | Pack |
|---|---|---|---|---|---|
| United Abrasives 22053 | 9.6/10 | 7 x .045 x 7/8 in | 8,500 | Cut-off | 50 |
| PFERD SG Steel 63114 | 9.6/10 | 4-1/2 x 3/32 x 5/8-11 in | 13,300 | Cut-off | 10 |
| United Abrasives 20079 | 9.6/10 | 6 x 1/4 x 7/8 in | 10,200 | Grinding | 25 |
| Pearl DCW06A Slimcut-40 | 9.5/10 | 6 x .040 x 7/8 in | 10,200 | Cut-off | 5 |
| Benchmark BM-DPCO4540 | 9.5/10 | 4 1/2 x .040 x 7/8 in | Not stated | Cut-off | 50 |
All specs here repeat what the maker rates and the listing prints, copied down 22 November 2026.
Buying guide: choosing the best type 27 abrasive wheel
Diameter, thickness and arbor
Match the wheel to the grinder first. Diameters here run from 4-1/2 inches on the PFERD and Benchmark wheels to 7 inches on the United Abrasives 22053. Thickness runs from .040 inch on the Benchmark and Pearl wheels to 1/4 inch on the United Abrasives 20079 grinding wheel. Four wheels state a 7/8 inch arbor, while the PFERD states a 5/8 inch-11 mount, so check the spindle before ordering. Thin wheels cut; the 1/4 inch wheel grinds. For thin wheels in more depth, see our best thin cut abrasive wheels guide.
Rated speed
Never run a wheel past its rated speed. Stated maximums here are 8,500 RPM on the United Abrasives 22053, 10,200 RPM on the United Abrasives 20079 and the Pearl DCW06A, and 13,300 RPM on the PFERD. The Benchmark listing states no RPM figure. Match the wheel rating to the grinder nameplate, and keep the guard in place for every cut.
Cutting or grinding
Four picks here are cut-off wheels and one is a grinding wheel. The United Abrasives 20079 is a 6 by 1/4 inch grinding wheel for ferrous metals. The United Abrasives 22053, Benchmark, Pearl and PFERD wheels are thin cut-off wheels from .040 to 3/32 inch thick. A cut-off wheel trims and slices; a grinding wheel removes stock and dresses a bead. For cut-off wheels only, see our best abrasive cut off wheels guide, and for the thickness trade-off see thin vs standard cut off wheel.
Pack count and grain
Pack counts run from 5 wheels on the Pearl DCW06A to 50 wheels on the United Abrasives 22053 and the Benchmark pack, with 25 on the United Abrasives 20079 and 10 on the PFERD. All five state aluminum oxide grain. The Pearl states contaminant free at Fe + S + Cl under 0.1% and grit A46, which matters on stainless work. The United Abrasives wheels state internal fiberglass reinforcement and Made in the USA.
Use as directed. Wear eye and face protection, keep the guard in place, clamp the work, and keep hands and clothing clear of the spinning wheel. Check each wheel for cracks before mounting, never exceed the rated RPM, and let the wheel stop before setting the grinder down. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Check the arbor: four wheels here state 7/8 inch, the PFERD states 5/8 inch-11.
- Check the rated RPM against the grinder nameplate before mounting any wheel.
- Inspect each wheel for cracks or chips on arrival and before every use.
- Keep the guard fitted and clamp the workpiece before cutting or grinding.
For more options, see our metalworking machines guides.
FAQ for welders
What is the best type 27 abrasive wheel here?
The United Abrasives 22053 takes the top spot here: a 7 by .045 inch cut-off wheel in a 50-pack, rated at 8,500 max RPM for right-angle grinders. The PFERD follows with the highest stated speed at 13,300 RPM.
What sizes do these wheels come in?
Diameters stated are 4-1/2, 6 and 7 inches. Thickness stated runs from .040 inch to 1/4 inch, and arbors are 7/8 inch on four wheels and 5/8 inch-11 on the PFERD.
Which wheel here is for grinding?
The United Abrasives 20079 is the grinding wheel: 6 by 1/4 by 7/8 inches for ferrous metals, rated at 10,200 max RPM in a 25-pack. The other four are thin cut-off wheels.
How many wheels come in each pack?
Pack counts stated are 50 on the United Abrasives 22053 and Benchmark, 25 on the United Abrasives 20079, 10 on the PFERD and 5 on the Pearl DCW06A.
Scoring, line by line
Each wheel is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of these listings states a safety certification or a warranty term, so every wheel here scores zero on those two criteria; the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| United Abrasives 22053 | 9.6 | 29 | 21 | 22 | n/a | 0 |
| PFERD SG Steel 63114 | 9.6 | 30 | 21 | 20 | n/a | 0 |
| United Abrasives 20079 | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Pearl DCW06A Slimcut-40 | 9.5 | 28 | 20 | 19 | n/a | 0 |
| Benchmark BM-DPCO4540 | 9.5 | 28 | 19 | 19 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.
More welding guides
See every Welding Consumables guide and all Metal Fab Tools guides.
More picks: best abrasive wheel set, best abrasive wheels and discs, best dry grinding abrasive disc.




