Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tool Cart Side Tray (2026): 5 Picks for the Shop

Five tool cart side trays for a home shop, compared on mount type, tray size, material and what each tray holds, from magnetic shelf sets to rolling tray carts.

Best Tool Cart Side Tray (2026): 5 Picks for the Shop
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Mayouko Magnetic Toolbox Shelf SetBest OverallMayouko Magnetic Toolbox Shelf Set9.6/10View on Amazon
  2. 2EGOVO Rolling Tool TrayBest Rolling CartEGOVO Rolling Tool Tray9.6/10View on Amazon
  3. 3CMS MAGNETICS Tool TrayBest Single TrayCMS MAGNETICS Tool Tray9.5/10View on Amazon
  4. 4WORKPRO Magnetic Parts Tray SetBest for Small PartsWORKPRO Magnetic Parts Tray Set9.5/10View on Amazon

Your cart top fills up fast when the grinder, clamps and layout tools all land in the same square foot, and the small stuff ends up on the floor. A side tray moves cans, towels and fasteners off the work surface and onto the side of the cart, where you can grab them without clearing space. This guide compares the best tool cart side tray options for a home shop: magnetic shelf sets that stick to the cart side, rolling tray carts with detachable side trays, and magnetic parts trays, scored on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Mayouko Magnetic Toolbox Shelf Set: A 4-piece magnetic side shelf set: 6 and 12 inch trays, a paper towel holder and a 3 spray can holder with 7 screwdriver holes. Check price on Amazon
  • Best Rolling Cart EGOVO Rolling Tool Tray: A rolling tray cart with a 15.8 x 11.8 inch mesh tray, 3 detachable side trays and two lockable wheels. Check price on Amazon
  • Best Single Tray CMS MAGNETICS Tool Tray: One 12.125 x 4.5 x 1.25 inch magnetic tray with side holding magnets for tool boxes and cabinets. Check price on Amazon
  • Best for Small Parts WORKPRO Magnetic Parts Tray Set: Four collapsible silicone trays in three sizes that fold flat to 0.8 inch, with magnets on the bottom and inside. Check price on Amazon

The machines

Mayouko Magnetic Toolbox Shelf & Tray Set

Mayouko Magnetic Toolbox Shelf & Tray Set

Mayouko9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece magnetic side shelf set with two rectangle trays, a paper towel holder and a spray can holder, in stainless steel with rubber coated magnets.

Pros

  • Two rectangle trays, 6 inch and 12 inch, plus a 2-piece paper towel holder
  • 3 spray can holder with 7 screwdriver holes in one unit
  • Rubber coated magnets mount on the cart side with no drilling
  • Stainless steel with a black coating against rust

Cons

  • Needs a magnetic metal surface; it will not stick to non-magnetic panels
  • Tray sizes stop at 12 inches, so long tools stay on the cart top
  • Paper towel holder is part of the set whether you use it or not
  • No warranty term is stated
Metal Rolling Tool Tray with Wheels

Metal Rolling Tool Tray with Wheels

EGOVO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A rolling metal tray cart with a 15.8 x 11.8 inch mesh tray, 3 detachable side trays on adjustable hooks, and four swivel casters with two lockable wheels.

Pros

  • 3 detachable side trays plus extra hooks for tools and parts
  • 15.8 x 11.8 inch mesh tray drains oil and water
  • Four 360 degree swivel casters, two of them lockable
  • Metal frame with anti-rust powder coating

Cons

  • Takes floor space as a full rolling cart
  • Mesh tray gaps drop small screws and pins
  • Only two of the four wheels lock
  • Main tray is 15.8 x 11.8 inches, small for large parts
CMS MAGNETICS - Magnetic Tool Tray 12.12x4.5x1.25"

CMS MAGNETICS - Magnetic Tool Tray 12.12x4.5x1.25"

CMS MAGNETICS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single magnetic tool tray, 12.125 x 4.5 x 1.25 inches, with side holding magnets for tool boxes, cabinets and pallet racks.

Pros

  • Side holding magnets mount it to tool boxes and cabinets
  • 12.125 inch length holds a row of tools and hardware
  • 1.25 inch depth keeps parts in the tray
  • Simple one-piece tray with nothing to assemble

Cons

  • Single tray only; no second tray or can holder
  • 4.5 inch width is narrow for bulky tools
  • Needs a magnetic surface to mount
  • No warranty term is stated
WORKPRO 4PC Collapsible Magnetic Parts Tray Set

WORKPRO 4PC Collapsible Magnetic Parts Tray Set

WORKPRO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece collapsible silicone parts tray set in three sizes, with magnets on the bottom and inside, folding flat to 0.8 inch.

Pros

  • Three sizes: 11 x 7.1, 6.3 x 5.3 and two 5.3 x 3.1 inch trays
  • Folds flat to 0.8 inch and expands to 1.97 inches
  • Magnets on the bottom and inside hold screws and nuts
  • Silicone with plastic edges, no burrs to scratch paint

Cons

  • Silicone walls flex under heavy hand tools
  • Largest tray is 11 x 7.1 inches, sized for parts, not cans
  • No spray can holder or towel storage
  • Collapsible design trades rigidity for flat storage
Dehoyi Heavy Duty Adjustable Height Metal Rolling

Dehoyi Heavy Duty Adjustable Height Metal Rolling

DEHOYI9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A height-adjustable rolling tool tray cart, 36.2 to 42.9 inches, with a double tray layout, removable tray, hooks and four swivel wheels.

Pros

  • Height adjusts from 36.2 to 42.9 inches for standing or seated work
  • Double tray design with a removable tray and extra hooks
  • Four 360 degree swivel wheels for moving around the shop
  • Thickened metal plate with anti-rust powder coated finish

Cons

  • Trays sit on top; nothing hangs on the cart side
  • Height range starts at 36.2 inches, tall for low work
  • Four swivel wheels roll freely on sloped floors
  • Takes floor space as a full rolling cart

Spec sheet comparison

Model Gear Score Type Main tray size Pieces Material Mounting Warranty
Mayouko Magnetic Toolbox Shelf Set 9.6/10 Magnetic shelf set 12 in rectangle tray 4 Stainless steel Rubber coated magnets Not stated
EGOVO Rolling Tool Tray 9.6/10 Rolling cart 15.8 x 11.8 in mesh 3 side trays Metal Detachable hooks Not stated
CMS MAGNETICS Tool Tray 9.5/10 Magnetic tray 12.125 x 4.5 in 1 Not stated Side holding magnets Not stated
WORKPRO Magnetic Parts Tray Set 9.5/10 Magnetic parts trays 11 x 7.1 in 4 Silicone Bottom and inside magnets Not stated
DEHOYI Rolling Tool Tray 9.5/10 Rolling cart Double tray 2 trays Metal Removable tray and hooks Not stated

Ratings in this table are the makers’ own claims taken from each product page (21 November 2026).

Buying guide: choosing the best tool cart side tray

Magnetic mount or rolling cart

Side trays split into two kinds here. Magnetic trays stick to the steel side of a toolbox or cart with no drilling: the Mayouko set, the CMS MAGNETICS tray and the WORKPRO parts trays all mount this way, so the cart side has to be a magnetic metal surface. Rolling tray carts are their own work surface on wheels: the EGOVO carries 3 detachable side trays on hooks, and the DEHOYI runs a double tray layout on top. Pick magnetic when floor space is tight, and a rolling cart when you want a second surface that follows you around the shop.

Tray size and what fits

Size decides what the tray actually holds. The Mayouko set gives you a 6 inch rectangle tray and a 12 inch rectangle tray, plus a 3 spray can holder with 7 screwdriver holes. The CMS MAGNETICS tray measures 12.125 inches long, 4.5 inches wide and 1.25 inches deep, a single row for tools and hardware. The WORKPRO trays run from 5.3 x 3.1 inches up to 11 x 7.1 inches and fold flat to 0.8 inch for storage. On the rolling carts, the EGOVO mesh tray is 15.8 x 11.8 inches, and the DEHOYI height adjusts from 36.2 to 42.9 inches.

Material and finish

The Mayouko trays are stainless steel with a black coating, and the magnets are rubber coated to grip without scratching the surface underneath. The WORKPRO trays are silicone with plastic edges, made to fold and to hold screws, nuts and pins. The EGOVO and DEHOYI carts are metal with anti-rust powder coating; the EGOVO main tray is mesh, which drains oil and water instead of pooling them. Match the material to the load: steel for cans and hand tools, silicone for small parts you sort as you work.

Wheels, hooks and staying put

Both rolling carts run on four 360 degree swivel wheels. The EGOVO adds two lockable wheels so the cart stays where you park it, and its side tray hooks adjust to tighten or loosen the fit. The DEHOYI adds a removable tray and extra hooks, and its height adjustment covers standing and seated work. Magnetic trays stay put by magnet strength alone, so check the stated mount: rubber coated magnets on the Mayouko, side holding magnets on the CMS MAGNETICS, and dual magnets on the WORKPRO.

Use as directed. Keep hot work away from silicone trays and paper towel holders, and never load a magnetic tray past what the magnets can hold over a walkway. Lock the wheels before you lean on a rolling tray cart, and keep spray cans away from sparks and slag. See the OSHA welding overview and our Safety Disclaimer.

Before You Strike an Arc

  • Check that your cart side is magnetic steel before ordering a magnetic tray; the Mayouko, CMS MAGNETICS and WORKPRO all need a magnetic metal surface.
  • Measure the flat side panel of your cart against the tray length: 12 inches on the Mayouko and CMS MAGNETICS trays, 11 inches on the largest WORKPRO tray.
  • On the EGOVO, set the side tray hooks and lock two wheels before you load tools; on the DEHOYI, set the height between 36.2 and 42.9 inches for the job.
  • Keep spray cans and paper towels on the far side of the cart from the weld zone, and keep small fasteners in a tray with a raised edge.

FAQ for welders

Will a magnetic side tray stick to any tool cart?

It sticks to a magnetic metal surface. The Mayouko set uses rubber coated magnets made for the side of a wheeled tool chest, the CMS MAGNETICS tray mounts to tool boxes, cabinets and pallet racks, and the WORKPRO trays stick to tool carts and metal shelves. A non-magnetic side panel will not hold them.

What size side tray do I need for spray cans?

The Mayouko set includes a 3 spray can holder with 7 screwdriver holes, sized for cans and drivers in one unit. The CMS MAGNETICS tray is 4.5 inches wide, and the largest WORKPRO tray is 11 x 7.1 inches, both better suited to tools and small parts than to cans.

Is a rolling tray cart better than a magnetic tray?

It depends on floor space. A rolling cart like the EGOVO or DEHOYI is a second work surface on four swivel wheels, with side trays or a double tray layout. A magnetic tray adds storage to the cart you already own and takes no floor space, but it only holds what the magnets can carry.

Can I use these trays for small parts like screws and nuts?

Yes. The WORKPRO set is made for screws, nuts, pins and small parts, with magnets on the bottom and inside of each tray. The CMS MAGNETICS tray holds tools and hardware in a 1.25 inch deep tray, and the Mayouko rectangle trays hold parts on the cart side.

Related: best mobile tool cart, best heavy duty tool cart, and the blacksmithing hub.

Scoring, line by line

Each tray is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Trays and tray carts have no electrical safety listing to state, so every pick here scores zero on that criterion, and no listing here states a warranty term, so the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Mayouko Magnetic Toolbox Shelf Set 9.6 30 21 21 n/a 0
EGOVO Rolling Tool Tray 9.6 29 21 20 n/a 0
CMS MAGNETICS Tool Tray 9.5 27 20 20 n/a 0
WORKPRO Magnetic Parts Tray Set 9.5 26 19 20 n/a 0
DEHOYI Rolling Tool Tray 9.5 24 20 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides

Shop Fixtures ·

Best Heavy Duty Tool Cart (2026)

Five heavy duty tool carts for the garage and shop, compared on load rating, tiers, casters and storage.