Best High Bay LED Shop Lights (2026): 5 UFO Picks for Shops and Garages
Five UFO high bay LED lights for shops, barns and warehouses, compared on watts, lumens, dimming, ratings and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJC-LGL 150W 6-Pack9.7/10View on Amazon - 2
Brightest OutputElaruslux 200W 10-Pack9.7/10View on Amazon - 3
Best DimmingHYPERLITE 150W 4-Pack9.7/10View on Amazon - 4
Lightweight PickSunco 150W 10-Pack9.7/10View on Amazon
A dim shop hides the fit-up line, the bead and the grinder marks, and a dark corner turns a simple repair into guesswork. Overhead light that reaches the bench and the floor changes how a weld reads and how the floor feels underfoot. This guide compares the best high bay led shop lights for warehouses, barns, garages and fab shops, on what each listing states: watts, lumens, dimming, ratings and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall JC-LGL 150W 6-Pack: 22,500 lumens with three selectable wattages, 0-10V dimming, an IP65 rating and a 5 year warranty. Check price on Amazon
- Brightest Output Elaruslux 200W 10-Pack: 29,500 lumens at 5000K with a 90+ CRI and up to 150 lumens per watt. Check price on Amazon
- Best Dimming HYPERLITE 150W 4-Pack: 1-10V dimming, 21,750 lumens at 145 lumens per watt, UL listed and IP65 rated. Check price on Amazon
- Lightweight Pick Sunco 150W 10-Pack: A 2.14 lb body with a 110 degree beam, UL, FCC and RoHS certifications, in a 10-pack. Check price on Amazon
The machines

JC-LGL UFO LED High Bay Light 150W 6 Pack
A 150W UFO high bay with 22,500 lumens, three selectable wattages, 0-10V dimming, an IP65 rating and a 5 year warranty, sold as a 6-pack.
Pros
- Three selectable wattages, 150W, 100W and 90W, in one light
- 22,500 lumens at 5000K with 0-10V dimming
- IP65 water and dust rating plus an IK08 protection level
- 5 year warranty with a hanging hook, safety rope and 5 foot cord in the box
Cons
- Dimmer switch not included
- A CRI over 70 is lower than the 90+ CRI on the Elaruslux
- Less light than the 200W models here
- A 6-pack is more than a small shop needs for one bay

HYPERLITE LED High Bay Lights 150W 21,750lm 5000K
A 150W UFO high bay with 21,750 lumens, 1-10V dimming, a UL listing and an IP65 rating, sold as a 4-pack with a hook and safety rope.
Pros
- 21,750 lumens at 145 lumens per watt
- 1-10V dimmable with a 5 foot cord and a 110V standard plug
- UL listed and IP65 rated for water and dust
- 5 year warranty with a free hook and safety rope in the box
Cons
- A reflector is not included
- At 8.0 lb, it weighs more than the Sunco at 2.14 lb
- Operates from minus 22 to 113 degrees F, a narrower cold range than the Sunco
- No selectable wattage; it runs at 150W only

Sunco 10 Pack UFO LED High Bay Light, 150W
A 150W UFO high bay with 19,500 lumens, a 110 degree beam and a 2.14 lb body, sold as a 10-pack with UL, FCC and RoHS certifications.
Pros
- 2.14 lb body, light to hang, with an included hanging loop
- 110 degree beam spreads light across shelving and floor space
- UL, FCC and RoHS certifications with a wet rating for indoor use
- Runs from minus 40 to 113 degrees F for unheated shops
Cons
- Non-dimmable; it runs at full output every time
- 19,500 lumens is the lowest output here
- 30,000 hour rated life is shorter than the 50,000 hour figures here
- 130 lumens per watt is lower than the 145 and 150 figures here

10 Pack 200W UFO LED High Bay Light
A 200W UFO high bay with 29,500 lumens, 90+ CRI and a 105 degree beam, sold as a 10-pack with an ETL listing.
Pros
- 29,500 lumens, the highest output here
- 90+ CRI for accurate colors
- Up to 150 lumens per watt
- 105 degree beam with a flicker-free driver
Cons
- 2 year warranty, the shortest here
- 200W draws more power than the 150W models here
- A 10-pack suits a large shop more than a single bay
- Dimming is not part of this listing, so buyers who want dimming should pick another light here

HYPERLITE High Bay LED Light
A 200W UFO high bay with 26,000 lumens at 5000K and an ETL listing, sold as a 4-pack with a standard US plug.
Pros
- 26,000 lumens at 5000K from 200W
- One-piece housing for thermal management
- ETL listed with a standard US plug for easy install
- 3 year limited warranty with a new light for defects in 1 year
Cons
- No dimming; buyers who want it should pick the HYPERLITE 150W or the JC-LGL
- 26,000 lumens is less than the Elaruslux at the same 200W
- 3 year warranty is shorter than the 5 year terms here
- 200W draws more power than the 150W models here
Spec sheet comparison
| Model | Gear Score | Watts | Lumens | Dimming | Rating | Pack | Warranty |
|---|---|---|---|---|---|---|---|
| JC-LGL 150W 6-Pack | 9.7/10 | 150W | 22,500 | 0-10V | ETL, IP65 | 6 | 5 years |
| HYPERLITE 150W 4-Pack | 9.7/10 | 150W | 21,750 | 1-10V | UL, IP65 | 4 | 5 years |
| Sunco 150W 10-Pack | 9.7/10 | 150W | 19,500 | Non-dimmable | UL, FCC, RoHS | 10 | 5 years |
| Elaruslux 200W 10-Pack | 9.7/10 | 200W | 29,500 | Not stated | ETL | 10 | 2 years |
| HYPERLITE 200W 4-Pack | 9.6/10 | 200W | 26,000 | Not stated | ETL | 4 | 3 years |
All specs here repeat what the maker rates and the listing prints, copied down 21 November 2026.
What to look for in the best high bay led shop lights
Watts and lumens
Watts set the power draw and lumens set the light output. The three 150W models here put out 19,500, 21,750 and 22,500 lumens, while the two 200W models put out 26,000 and 29,500 lumens. The Elaruslux lists up to 150 lumens per watt, the HYPERLITE 150W lists 145 lumens per watt, and the Sunco lists 130 lumens per watt. Match the lumen figure to the size of the space, not the wattage alone.
Dimming
Two of the five lights dim. The HYPERLITE 150W dims at 1-10V and the JC-LGL dims at 0-10V, and the JC-LGL also lets you pick 150W, 100W or 90W from the same housing. The Sunco is non-dimmable and runs at full output every time you switch it on. The JC-LGL notes the dimmer switch is not included, so plan for that part if you want dimming.
Beam angle and color
All five lights list 5000K daylight. The Sunco lists a 110 degree beam and the Elaruslux lists a 105 degree beam, which spreads light across shelving, floor space and work areas. The Elaruslux lists a 90+ CRI for color accuracy, while the JC-LGL lists a CRI over 70.
Ratings for damp and dusty shops
The HYPERLITE 150W and the JC-LGL both carry an IP65 rating for water and dust, and the JC-LGL adds an IK08 protection level. The Sunco is wet rated for indoor use and carries UL, FCC and RoHS certifications. The HYPERLITE 150W runs from minus 22 to 113 degrees F, and the Sunco runs from minus 40 to 113 degrees F, which suits unheated shops.
Pack size and mounting
Packs run from 4 to 10 lights. The HYPERLITE 150W and the JC-LGL include a hanging hook, a safety rope and a 5 foot cord, and the Elaruslux includes a 5 foot cord and a safety cable. The Sunco hangs from an included hanging loop on a 60 inch cord, and the HYPERLITE 200W installs with a standard US plug. The HYPERLITE 150W and the JC-LGL both list a 3 minute install.
Use as directed. Cut power at the breaker before you hang or move a light, use the included hook and safety rope where the box includes one, and keep cords clear of hot work and grinder sparks. Do not run a light on a circuit or dimmer the listing does not support, and never exceed the stated wattage for the fixture.
Before You Strike an Arc
- Check the plug and supply before you hang anything: the HYPERLITE 150W lists a 110V standard plug, the Sunco lists a 120V supply, and the HYPERLITE 200W lists a standard US plug.
- Check the box for the hook, safety rope and cord: the HYPERLITE 150W and the JC-LGL list a hook, a safety rope and a 5 foot cord, and the Elaruslux lists a 5 foot cord and a safety cable.
- Dimming needs a matching control: the HYPERLITE 150W dims at 1-10V and the JC-LGL dims at 0-10V, and the JC-LGL notes the dimmer switch is not included.
- Check each light on arrival: switch it on, look at the 5000K output and the beam, and check the housing and cord for damage before you hang it.
FAQ for welders
What size high bay light fixture do I need for my shop?
Match watts and lumens to the space. The 150W models here put out 19,500 to 22,500 lumens, and the 200W models put out 26,000 and 29,500 lumens. The Sunco lists a 110 degree beam and the Elaruslux lists a 105 degree beam, which helps spread light across a wide floor.
How do I clean a high bay shop light?
Cut power first and let the light cool, then wipe the lens and housing with a dry cloth. The HYPERLITE 150W and the JC-LGL carry an IP65 rating for water and dust, so a damp wipe suits those two. Keep water away from the plug and cord ends.
How much does it cost to install a high bay light fixture?
The listings describe a hang and plug job: the HYPERLITE 150W, the JC-LGL and the Elaruslux include a 5 foot cord with a US plug, plus a hook or a safety cable. If the shop needs a new circuit, a higher mount or wiring work, hire a licensed electrician for that part.
How big should a high bay light fixture be?
Bodies here run from 10.8 to 13.0 inches across, so any of them fits a standard high bay mount. Pick by light output instead: 150W for 19,500 to 22,500 lumens, or 200W for 26,000 and 29,500 lumens.
How do I fix a loose high bay light fixture?
Cut power first, then check the hook, the safety rope and the mount for wear or a loose fit. Tighten the mount, reseat the hook, and check the cord for damage before you switch the light back on. Replace a worn hook or rope before you hang the light again.
Related: best shop lights, best shop light fixtures, best shop lights under 100, best work light for welding, best shop light for working on cars, fluorescent light fixture sizes, shop fan vs exhaust fan, and the shop fixtures hub. Also see the blacksmithing hub.
Scoring, line by line
Each light is scored out of 10 on performance, build, value, safety listing and warranty. Every light here carries a UL or ETL listing, so every light scores on the safety criterion, and the ranking comes from all five criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| JC-LGL 150W 6-Pack | 9.7 | 32 | 22 | 21 | 8 | 4 |
| HYPERLITE 150W 4-Pack | 9.7 | 30 | 21 | 21 | 8 | 4 |
| Sunco 150W 10-Pack | 9.7 | 28 | 21 | 21 | 8 | 4 |
| Elaruslux 200W 10-Pack | 9.7 | 32 | 20 | 21 | 7 | 3 |
| HYPERLITE 200W 4-Pack | 9.6 | 29 | 20 | 20 | 7 | 3 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




