Best Tool Cart Foam Liner (2026): 5 Rolls Compared
Five 16 inch wide foam liner rolls for tool cart drawers, compared on length, thickness, grip, cutting to fit and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallMIXPOWER 16 x 6 ft9.6/10View on Amazon - 2
Longest RollONREVA 16 in x 18 ft9.6/10View on Amazon - 3
Best Long RollPrecision Defined 16 ft9.6/10View on Amazon - 4
Best Sound DampeningHooTown 16 x 193 in9.5/10View on Amazon
A rolling cart drawer that rattles every time it moves is a small annoyance that adds up across a workday. Wrenches slide, sockets roll into a pile, and the drawer bottom takes the wear. The best tool cart foam liner stops that slide, cushions the tools, and keeps the drawer bottom from getting chewed up.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall MIXPOWER 16 x 6 ft: A stated 3 mm thickness, grid lines for cutting, washable foam rubber, and the only stated warranty here, 1 year. Check price on Amazon
- Longest Roll ONREVA 16 in x 18 ft: A 16 inch by 18 foot PVC rubber roll in a stated 1/8 inch thickness, the most coverage here. Check price on Amazon
- Best Long Roll Precision Defined 16 ft: A 16 foot memory foam-like roll with grid lines, washable and non-slip. Check price on Amazon
- Best Sound Dampening HooTown 16 x 193 in: Soft, thick foam that absorbs the sound of dropped tools, in a 193 inch roll. Check price on Amazon
The machines

MIXPOWER Professional Tool Box Liner and Drawer
A 16 inch wide, 6 foot foam rubber roll with grid lines for measuring, a stated 3 mm thickness, and the only stated warranty here, 1 year.
Pros
- States a 3 mm thickness and a 16 inch by 6 foot size
- Grid lines for measuring and cutting straight
- Rinses clean under cold water and lays flat after washing
- 1 year quality warranty stated in the listing
Cons
- 6 foot length covers fewer drawers than the longer rolls here
- No weight rating for heavy tools
- Black only, with no color choice stated
- Foam rubber, not the PVC rubber of the longest roll

ONREVA Tool Box Liner 16" Wide x 18 Ft
An 18 foot PVC rubber roll, the longest here, in a stated 1/8 inch thickness with a textured non-slip surface.
Pros
- Longest roll here at 16 inches by 18 feet
- Stated 1/8 inch PVC rubber, thicker than the 3 mm rolls
- Textured non-slip surface for sockets and wrenches
- Trims to fit rolling carts, cabinets and workbenches
Cons
- No warranty term stated
- No grid lines stated for measuring cuts
- No cleaning instructions stated
- Red only, with no color choice stated

Precision Defined Toolbox Liner Non-Slip Tool
A 16 foot memory foam-like roll, 16 inches wide, with straight grid lines and a washable, non-slip textured grip.
Pros
- 16 foot roll covers several drawers from one roll
- Memory foam-like material that clings to tools
- Straight grid lines for quick, clean cuts
- Washable with a simple wipe to clean
Cons
- No warranty term stated
- No weight rating for heavy tools
- Black only, with no color choice stated
- Needs trimming for any drawer narrower than 16 inches

Tool Box Liner Foam Toolbox Drawer Liner
A 16 inch by 72 inch high-density foam roll with a stated 3 mm thickness, cuttable with scissors or knives.
Pros
- States a 3 mm thickness in high-density foam
- Cuts to fit with scissors or knives
- Absorbs shock and vibration from tools
- Cushioned surface protects tools and work surfaces
Cons
- No weight rating for heavy tools
- 72 inch roll covers fewer drawers than the longer rolls here
- Maker warns against chemicals, high heat and sun exposure
- No grid lines stated for measuring cuts

Foam Toolbox Liner Drawer Liner
A 16 inch by 193 inch red foam roll that absorbs sound, grips tools in place, and cuts to fit any drawer.
Pros
- Long roll at 16 inches by 193 inches
- Soft, thick foam absorbs the sound of dropped tools
- Non-slip grip keeps tools from sliding and scratching
- Cuts to fit and stays flat in the drawer
Cons
- No thickness stated in the listing
- No grid lines stated for measuring cuts
- No weight rating for heavy tools
- Red only, with no color choice stated
Spec sheet comparison
| Model | Gear Score | Roll size | Thickness | Material | Warranty |
|---|---|---|---|---|---|
| MIXPOWER 16 x 6 ft | 9.6/10 | 16 in x 6 ft | 3 mm | Foam rubber | 1 year |
| ONREVA 16 in x 18 ft | 9.6/10 | 16 in x 18 ft | 1/8 in | PVC rubber | Not stated |
| Precision Defined 16 ft | 9.6/10 | 16 in x 16 ft | 0.12 in | Memory foam-like | Not stated |
| ChiKiner 16 x 72 in | 9.5/10 | 16 in x 72 in | 3 mm | High-density foam | Not stated |
| HooTown 16 x 193 in | 9.5/10 | 16 in x 193 in | Not stated | Foam | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 21 November 2026.
Buying guide: what matters in the best tool cart foam liner
Roll length and width
Every roll here is 16 inches wide, so the choice is length. Rolls run from 6 feet to 18 feet, and a longer roll lines more drawers from a single cut. Measure each drawer in a tool cart with drawers first, then cut the liner to fit, since a roll that is too short leaves drawers bare.
Thickness
Thickness is the cushion between tool and drawer. The liners here state 3 mm, 0.12 inch and 1/8 inch, and one listing states no thickness at all. A thicker liner cushions heavier tools better, while a thin liner suits shallow drawers that need every bit of depth.
Grip and cushion
A liner earns its keep by holding tools still when a drawer opens and closes. The makers describe non-slip surfaces, textured grip and memory foam-like material that clings to tools. Soft foam also absorbs sound, so dropped tools land quieter than they would on bare metal.
Cutting to fit
Every liner here cuts to fit with scissors, a razor or a utility knife, and two list grid lines for measuring straight cuts. Cut on a flat surface, check the fit in the drawer, and trim again rather than forcing an oversized piece into place.
Cleaning
Shop liners collect grit and oil. Three liners here are described as washable, with one maker saying to rinse under cold water and let it dry. A liner that lays flat after washing goes back in the drawer without a fight.
Use as directed. Cut with a sharp blade on a flat surface, keep fingers clear of the cut line, and keep liners away from hot work and open flame, since foam and rubber can melt or burn. Check the maker care notes before using cleaners or solvents on the liner.
Before You Strike an Arc
- Measure every drawer before cutting, since cart drawers in one cart can differ in size.
- Cut the liner a touch short of the drawer walls so it lies flat without bunching at the edges.
- Check that drawers still slide and close with the liner and tools in place.
- For washable liners, rinse and let the liner dry fully before putting tools back on it.
- Keep liners clear of hot metal, sparks and solvents that the maker warns against.
FAQ for welders
What size foam liner fits a tool cart drawer?
Start with the drawer, not the roll. Every roll here is 16 inches wide, so measure the drawer depth and length, then cut the liner to fit. A 6 foot roll suits a small cart, while the 18 foot roll covers several drawers from one piece.
Can I wash a foam tool box liner?
Three liners here are described as washable. One maker says to rinse under cold water and set the liner out to dry, and another says a simple wipe cleans it. Let a washed liner dry fully before putting tools back on it.
Will a foam liner keep tools from sliding?
That is the main job of these liners. The makers describe non-slip surfaces, textured grip and foam that clings to tools, so wrenches and sockets stay where they are put when a drawer opens and closes.
Can I cut a foam liner to fit my cart?
Yes. Every liner here is made to be cut, with scissors, a razor or a utility knife, and two list grid lines for measuring straight cuts. Measure the drawer, mark the cut, and trim the liner on a flat surface.
Does foam liner work in a rolling tool cart?
Yes. The liners here are listed for carts, tool boxes, cabinets and workbenches, and non-slip grip matters most when a tool cart with wheels rolls across the shop. Cut each drawer liner to fit so it does not shift when the cart moves.
Related: best casters for tool cart, best tool cart organizer, and the shop fixtures hub. Also see our tool cart foam category. Also see our best welding cart. Also see our best tool cart with wheels. Also see our best rolling tool cart. Also see our best mobile tool cart. Also see our best heavy duty tool cart. Also see our best tool cart side tray.
Scoring, line by line
Each liner is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Foam liners carry no electrical safety listing, so every liner here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MIXPOWER 16 x 6 ft | 9.6 | 29 | 20 | 20 | n/a | 3 |
| ONREVA 16 in x 18 ft | 9.6 | 30 | 21 | 22 | n/a | 0 |
| Precision Defined 16 ft | 9.6 | 28 | 20 | 20 | n/a | 0 |
| ChiKiner 16 x 72 in | 9.5 | 27 | 19 | 19 | n/a | 0 |
| HooTown 16 x 193 in | 9.5 | 26 | 19 | 19 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




