Best Steel Plate Clamp (2026): 4 Clamps Compared
Four steel plate clamps compared by rated capacity from 1100 to 4400 lb, jaw opening, body construction and stated safety features.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Highest CapacityKARRYTON 2 Ton Plate Clamp9.5/10View on Amazon - 2
Certified PickAmarite 1 Ton Plate Clamp9.6/10View on Amazon - 3
Best Grip DesignFITHOIST 0.8 Ton Plate Clamp9.4/10View on Amazon - 4
Lightest PickFrienda 0.5 Ton Plate Clamp9.3/10View on Amazon
When a sheet of plate has to come off the rack and onto the table without a second set of hands, the best steel plate clamp is the one whose rating covers the plate in front of you and whose jaw fits its thickness. We compared four vertical plate clamps by rated capacity, jaw opening, body construction and stated safety features, using only what each maker publishes.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
- Highest Capacity KARRYTON 2 Ton Plate Clamp: Rated 2 ton, 4400 lb, with a 1.3 inch jaw and safety spring mechanism. Check price on Amazon
- Certified Pick Amarite 1 Ton Plate Clamp: GS certified and CE marked, 1 ton rating, forged alloy steel body. Check price on Amazon
- Best Grip Design FITHOIST 0.8 Ton Plate Clamp: Sloping slot and serrated cams, 0.8 ton rating, 0.6 inch jaw. Check price on Amazon
- Lightest Pick Frienda 0.5 Ton Plate Clamp: Screw-adjustable 0 to 1.1 inch opening at 1.82 lb, 0.5 ton rating. Check price on Amazon
The machines

Amarite Vertical Plate Clamp, 1 Ton/2200lbs
A 1 ton vertical plate clamp rated at 2200 lb with a 0.8 inch jaw opening, forged alloy steel body and stated GS and CE markings.
Pros
- Only clamp here with stated GS certification and CE marking
- Stated compliant with EN 13155 and ASME B30.20
- One-piece forged alloy steel body
- Self-locking function during lifting, with a 180 degree swivel shackle
Cons
- Rated at 1 ton, half the capacity of the KARRYTON clamp
- Jaw opening stops at 0.8 inch, so thicker plate is out
- Plate surface hardness must stay below HRC30 or Brinell 300 per the maker
- Minimum working load limit is 10 percent of the maximum, per the maker

KARRYTON 2Ton/4400LB Vertical Lifting Plate Clamp
A 2 ton vertical plate clamp rated at 4400 lb with a 1.3 inch jaw opening, alloy steel body and a safety spring mechanism.
Pros
- Highest rated capacity here at 2 ton, 4400 lb
- Widest jaw opening here at 1.3 inches for thicker plate
- Safety spring mechanism keeps the clamp from sliding during a lift
- 180 degree rotary shackle adjusts to the lift angle
Cons
- Heaviest clamp here at 18.3 lb to handle and position
- No warranty term is stated
- Built for plate work, not for lifting round stock or pipe
- Oversized for thin sheet work under its jaw range

FITHOIST Vertical Plate Clamp 1760Lbs
A 0.8 ton vertical plate clamp rated at 1760 lb with a 0.6 inch jaw opening, welded alloy steel body and a safety spring mechanism.
Pros
- Sloping slot design increases grip in the horizontal position
- Safety spring mechanism keeps the clamp from slipping
- Fully welded alloy steel construction with anti-rust coating
- Pivoting bail and serrated hardened steel cams for hook-up
Cons
- Lowest jaw opening here at 0.6 inch
- Rated at 0.8 ton, below the 1 ton and 2 ton clamps here
- No certification standard is stated
- No warranty term is stated

Frienda Plate Lifting Clamp 1100 Lbs/0.5t
A 0.5 ton screw-adjustable plate clamp rated at 1100 lb with a 0 to 1.1 inch opening, in forged steel for horizontal and vertical lifts.
Pros
- Screw adjustment sets the opening from 0 to 1.1 inches
- Works for horizontal and vertical lifting and alignment
- Forged steel body for harsh shop environments
- Lightest clamp here at 1.82 lb to carry and position
Cons
- Lowest rated capacity here at 0.5 ton, 1100 lb
- Screw adjustment is slower to set than a spring latch
- No certification standard is stated
- No warranty term is stated
Spec sheet comparison
| Plate Clamp | Gear Score | Rated Capacity | Jaw Opening | Body | Warranty |
|---|---|---|---|---|---|
| KARRYTON 2 Ton Plate Clamp | 9.5/10 | 2 ton, 4400 lb | 1.3 in | Alloy steel | Not stated |
| Amarite 1 Ton Plate Clamp | 9.6/10 | 1 ton, 2200 lb | 0.8 in | Forged alloy steel | Not stated |
| FITHOIST 0.8 Ton Plate Clamp | 9.4/10 | 0.8 ton, 1760 lb | 0.6 in | Alloy steel, welded | Not stated |
| Frienda 0.5 Ton Plate Clamp | 9.3/10 | 0.5 ton, 1100 lb | 0 to 1.1 in | Forged steel | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (21 November 2026).
Buying guide: the best steel plate clamp
Rated capacity comes first
Every clamp here carries a stated rating, and that rating is the limit to work to. The KARRYTON clamp is rated at 2 ton, 4400 lb. The Amarite clamp is rated at 1 ton, 2200 lb, the FITHOIST clamp at 0.8 ton, 1760 lb, and the Frienda clamp at 0.5 ton, 1100 lb. The Amarite maker also states a minimum working load limit of 10 percent of the maximum, so very light lifts sit outside its stated range. Match the rating to the heaviest plate you move, and never lift over people.
Jaw opening decides what fits
Jaw opening sets the thickest plate a clamp can grip. The KARRYTON jaw opens to 1.3 inches, the widest here. The Frienda screw adjusts from 0 to 1.1 inches, which suits mixed thin stock. The Amarite jaw opens to 0.8 inch and the FITHOIST jaw to 0.6 inch, so both stop at thinner plate. Measure your plate before ordering, because a clamp that cannot close on the plate cannot hold it.
Locking and grip features
The KARRYTON and FITHOIST clamps state a safety spring mechanism that keeps the clamp from sliding during a lift. The FITHOIST design adds a sloping slot that increases grip in the horizontal position, plus serrated hardened steel cams. The Amarite clamp states a self-locking function during lifting. The Frienda clamp relies on screw adjustment for clamping force. See all hoists and lifting gear we cover.
Certification and plate hardness
The Amarite clamp is the only one here with stated certification: GS certified, CE marked, and stated compliant with EN 13155 and ASME B30.20. Its maker also states the plate surface hardness must stay below HRC30 or Brinell 300. No other maker here states a certification standard or a hardness limit, so those checks rest on the Amarite listing alone.
Before You Strike an Arc
- Check the rated capacity against the plate weight before every lift, and never exceed the stated rating.
- Measure plate thickness against the jaw opening: 1.3 inches on the KARRYTON, 0.8 inch on the Amarite, 0.6 inch on the FITHOIST.
- On the Amarite clamp, keep plate hardness below HRC30 or Brinell 300 as the maker states.
- Inspect the spring latch, cams and shackle on arrival, and confirm the lock lever moves freely.
- Keep people clear of the load path; never lift a plate over anyone.
FAQ for welders
What capacity plate clamp do I need?
Match the stated rating to your heaviest plate. The clamps here run from 0.5 ton, 1100 lb on the Frienda, to 2 ton, 4400 lb on the KARRYTON. The Amarite maker also states a minimum working load limit of 10 percent of its 2200 lb maximum.
What jaw opening do these clamps have?
The KARRYTON jaw opens to 1.3 inches, the Frienda screw adjusts from 0 to 1.1 inches, the Amarite jaw opens to 0.8 inch, and the FITHOIST jaw opens to 0.6 inch.
Which clamp states a certification?
The Amarite clamp states GS certification and CE marking, with compliance stated for EN 13155 and ASME B30.20. The other three makers state no certification standard.
Can these clamps lift horizontally?
The FITHOIST maker states a sloping slot that increases grip in the horizontal position, and the Frienda maker states horizontal and vertical lifting. The Amarite maker states vertical and horizontal use as well.
Do these clamps come with a warranty?
No maker here states a warranty term. The KARRYTON clamp includes a pair of nitrile palmed working gloves, per its maker.
Scoring, line by line
The Gear Score weighs performance (rated capacity and jaw opening), build (body material and construction), value (what the clamp covers for its class), safety (stated locking features and certifications) and warranty. Only the Amarite clamp states a certification standard, and no maker here states a warranty term, so the warranty part of the score stays at zero across the guide. How we pick explains the weights.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Amarite 1 Ton Plate Clamp | 9.6 | 29 | 21 | 20 | 7 | 0 |
| KARRYTON 2 Ton Plate Clamp | 9.5 | 32 | 21 | 21 | 0 | 0 |
| FITHOIST 0.8 Ton Plate Clamp | 9.4 | 27 | 20 | 20 | 0 | 0 |
| Frienda 0.5 Ton Plate Clamp | 9.3 | 24 | 19 | 19 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.
More welding guides
Also see our best 2 ton engine hoist. Also see our best lever hoist.
More picks: browse lifting and pressing, metal fab tools and every buying guide.




