Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Small Locking Pliers (2026): 4 Shop Picks

Four small locking pliers compared by jaw shape, jaw capacity, release mechanism, grip, stated ANSI standard and warranty.

Best Small Locking Pliers (2026): 4 Shop Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1IRWIN VISE-GRIP 4 in Long NoseBest OverallIRWIN VISE-GRIP 4 in Long Nose9.6/10View on Amazon
  2. 2IRWIN VISE-GRIP 4 in Curved JawBest Curved JawIRWIN VISE-GRIP 4 in Curved Jaw9.5/10View on Amazon
  3. 3WORKPRO 4-1/2 in Long NoseBest ValueWORKPRO 4-1/2 in Long Nose9.4/10View on Amazon
  4. 4Klein 38600 5 in Curved JawBest 5 InchKlein 38600 5 in Curved Jaw9.4/10View on Amazon

Fit-up is where a weld starts, and fit-up is mostly clamping. A small locking plier holds the tab, the patch or the bracket exactly where the tack needs it, then lets go with a squeeze of the release. We compared four picks to find the best small locking pliers for shop, farm and home work, scoring jaw shape, jaw capacity, release, build, stated standards and warranty from what each listing publishes. A 4 in plier fits the apron pocket and still reaches into corners a big C-clamp cannot, which is exactly where fit-up work happens.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall IRWIN VISE-GRIP 4 in Long Nose: ANSI stated, wire cutter, 1 5/8 in jaw, lifetime warranty Check price on Amazon
  • Best Curved Jaw IRWIN VISE-GRIP 4 in Curved Jaw: Wire cutter, trigger release, 1 in jaw, lifetime warranty Check price on Amazon
  • Best Value WORKPRO 4-1/2 in Long Nose: 4-1/2 in chrome vanadium, one-hand release, anti-slip handle Check price on Amazon
  • Best 5 Inch Klein 38600 5 in Curved Jaw: Pinch-free quick release, thumb knob, rust preventative coating Check price on Amazon

The machines

IRWIN VISE-GRIP Original Locking Pliers

IRWIN VISE-GRIP Original Locking Pliers

IRWIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 in long nose locking plier with hardened teeth, a wire cutter and a 1 5/8 in jaw capacity, in heat-treated alloy steel and stated to meet or exceed ANSI specifications.

Pros

  • Meets or exceeds ANSI specifications, the only stated standard here
  • 1 5/8 in jaw capacity, the largest stated in this group
  • Built-in wire cutter for more versatility
  • Limited lifetime manufacturer warranty description

Cons

  • Heaviest listing weight here at 0.44 kg
  • No anti-slip handle treatment stated
  • Long nose is less suited to round stock than a curved jaw
IRWIN VISE-GRIP Curved Jaw Locking Pliers

IRWIN VISE-GRIP Curved Jaw Locking Pliers

IRWIN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 in curved jaw locking plier with hardened teeth, a wire cutter and a 1 in jaw capacity, with a classic trigger release and a hex key adjusting screw.

Pros

  • Curved jaw with hardened teeth grips a variety of shapes from any angle
  • Built-in wire cutter for more versatility
  • Classic trigger release for maximum locking force
  • Limited lifetime manufacturer warranty description

Cons

  • 1 in jaw capacity is smaller than the long nose IRWIN's 1 5/8 inches
  • No standard or certification stated
  • No anti-slip handle treatment stated
WORKPRO 4-1/2 inch Mini Long Nose Locking Pliers

WORKPRO 4-1/2 inch Mini Long Nose Locking Pliers

WORKPRO9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-1/2 in mini long nose locking plier in chrome vanadium steel, with a one-handed release trigger, an anti-slip diamond-pattern handle and an adjustable screw.

Pros

  • Mini long nose at 4-1/2 inches
  • One-handed release trigger for single-handed operation
  • Anti-slip diamond-pattern handle for a comfortable grip
  • Chrome vanadium steel, heat-treated, with an adjustable screw

Cons

  • No warranty term is stated
  • No standard or certification stated
  • Jaw capacity is not stated
  • Marketing language is heavy; the steel claim is the maker's
Klein Tools 38600 Curved Jaw Locking Pliers

Klein Tools 38600 Curved Jaw Locking Pliers

KLEIN TOOLS9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 in curved jaw locking plier with lever-less quick release handles, an intuitive thumb knob and molded grips, listed for high locking force with pinch-free operation.

Pros

  • Lever-less quick release handles for pinch-free operation
  • Intuitive thumb knob for quick and easy size changes
  • Molded grips for all-day comfort
  • Rust preventative coating for corrosion protection

Cons

  • Warranty description reads 'Call vendor for warranty', so no term is stated
  • No standard or certification stated
  • Jaw capacity is not stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Jaw Length Features Warranty
IRWIN VISE-GRIP 4 in Long Nose 9.6/10 Long nose, 1 5/8 in capacity 4 in (100mm) Wire cutter, ANSI stated Limited lifetime
IRWIN VISE-GRIP 4 in Curved Jaw 9.5/10 Curved jaw, 1 in capacity 4 in Wire cutter, trigger release Limited lifetime
WORKPRO 4-1/2 in Long Nose 9.4/10 Long nose 4-1/2 in One-hand release, anti-slip handle Not stated
Klein 38600 5 in Curved Jaw 9.4/10 Curved jaw 5 in Quick release, thumb knob, molded grips Not stated

Ratings in this table are the makers’ own claims taken from each product page (22 October 2026). Where the spec table disagrees with the title, the table cells use the title figure.

Buying guide: choosing the best small locking pliers

Jaw shape: long nose or curved jaw

Two picks have long noses and two have curved jaws. The IRWIN 1602L3 is a 4 in long nose for narrow, hard-to-reach places, and the WORKPRO is a 4-1/2 in mini long nose for tightening, clamping, twisting and turning. The IRWIN 1002L3 is a 4 in curved jaw with hardened teeth designed to grip a variety of shapes from any angle, and the Klein 38600 is a 5 in curved jaw for clamping and gripping. For more reach, see our best long locking pliers guide.

Jaw capacity

Capacity is the thickest stock the jaws close on. The IRWIN long nose lists 1 5/8 inches, the largest stated here, and the IRWIN curved jaw lists 1 inch. The WORKPRO and Klein listings do not state a jaw capacity. If you clamp thick flat bar or stacked parts, a stated capacity matters; if you mostly hold sheet and small tube, any of these four covers it.

Release and adjustment

Every pick locks with a turn of the adjustment screw and lets go with a release. The IRWIN curved jaw lists a classic trigger release for maximum locking force and a hex key adjusting screw that draws materials together. The WORKPRO lists a one-handed release trigger and a flexible screw design for different jaw widths. The Klein lists lever-less quick release handles for pinch-free operation and an intuitive thumb knob for quick changes. Compare release styles in our toggle clamp vs C-clamp guide.

Grip, handles and coating

The WORKPRO lists an anti-slip diamond-pattern handle for a comfortable grip while maneuvering and rotating the tool. The Klein lists molded grips for all-day comfort and a rust preventative coating for corrosion protection. The IRWIN spec tables list alloy steel handles and an ergonomic grip type. None of the listings states a cushioned or dipped handle, so expect bare metal with shaping.

Warranty and stated standards

The two IRWIN listings carry a manufacturer warranty description of ‘Limited lifetime’, the only concrete terms here. The Klein warranty description reads ‘Call vendor for warranty’, and the WORKPRO listing states no warranty. Only the IRWIN long nose states a standard: it meets or exceeds ANSI specifications. For a full set instead of one size, see our best locking pliers set picks.

Wire cutters

Two picks list a built-in wire cutter: the IRWIN 1602L3 and the IRWIN 1002L3, both of which the listings say add versatility. It cuts tie wire, MIG wire and small fasteners without a second tool. The WORKPRO and Klein listings do not mention a cutter, so keep side cutters on the bench for those.

Use as directed. Locking pliers are clamps, not hammers: do not strike them to tighten the grip. Keep fingers clear of the release and the jaw pivot, wear eye protection when cutting wire with the built-in cutter, and never use pliers on live electrical work.

Before You Strike an Arc

  • Check the jaw faces on arrival: the IRWINs list hardened teeth, and factory oil should be wiped so the teeth bite.
  • Run the adjustment screw from open to closed before first use. A gritty screw is easier to address now than mid fit-up.
  • Squeeze, lock and release each pair. The Klein lists pinch-free quick release handles and the WORKPRO a one-handed trigger; both should open without a fight.
  • Match the jaw to the work: long nose for narrow gaps, curved jaw for a variety of shapes, per the listings.
  • Where the spec table disagrees with the title on size, measure the tool when it arrives and keep the box until it checks out.

FAQ for welders

What are locking pliers used for in welding?

Clamping fit-up: holding tabs, patches, brackets and small parts in place for tacking. A locking plier stays shut on its own, which frees both hands for the torch. The WORKPRO listing names clamping, twisting and turning among its uses.

Long nose or curved jaw for welding?

Long nose pliers reach into narrow, hard-to-reach places; the IRWIN 1602L3 and the WORKPRO 4-1/2 in are the long noses here. Curved jaws grip a variety of shapes from any angle, which suits mixed scrap and repair work; the IRWIN 1002L3 and the Klein 38600 are the curved jaws. Many shops keep one of each.

What does the wire cutter on locking pliers do?

The IRWIN long nose and the IRWIN curved jaw both list a built-in wire cutter for more versatility. It cuts tie wire, MIG wire and small fasteners in the shop. Tie wire holds parts for tacking and gets trimmed after, so a cutter on the plier saves a trip to the bench. It is not a substitute for a dedicated cutter on hardened wire.

Do locking pliers need a warranty?

A warranty matters if the adjustment screw or release wears out. The two IRWIN listings state a limited lifetime manufacturer warranty description. The Klein says to call the vendor, and the WORKPRO states no warranty, so factor that into the price you are willing to pay.

Can I use small locking pliers on thick stock?

Only within the stated jaw capacity: 1 5/8 inches on the IRWIN long nose and 1 inch on the IRWIN curved jaw. Forcing the jaws wider than they close strains the mechanism. For thick plate, step up to a larger clamp.

Related: best long locking pliers, best locking pliers set, best locking c-clamp, best small spring clamps, toggle clamp vs c-clamp, bar clamp vs c-clamp for welding, quick clamps for welding, welding magnets vs welding clamps, best welding clamps for fabrication, and the welding tables and carts hub.

Scoring, line by line

Each plier is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Performance covers jaw shape, jaw capacity and the release mechanism; build covers steel and construction; value covers what the stated specs give a welder. Only the IRWIN long nose states a standard, ANSI, so it is the only pick with safety points. The two IRWINs state a limited lifetime warranty; the other listings state no term.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
IRWIN VISE-GRIP 4 in Long Nose 9.6 30 21 20 5 3
IRWIN VISE-GRIP 4 in Curved Jaw 9.5 29 21 20 0 3
WORKPRO 4-1/2 in Long Nose 9.4 28 20 21 0 0
Klein 38600 5 in Curved Jaw 9.4 28 20 19 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides

Welding Tables and Carts ·

Best Straight Locking Pliers (2026)

Best straight locking pliers compared: four listings from 6.5 to 10 inches scored on jaw shape, adjustment, teeth and warranty.