Best Sandblasting Media 120 Grit (2026): 4 Aluminum Oxide Picks
Aluminum oxide packs at 120 grit compared on pack weight, stated hardness, wet or dry use, reuse claims, equipment fit and packaging.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallTITGGI 120 Grit 19 lb9.6/10View on Amazon - 2
Small JobsKandylio #120 2.5 lb9.5/10View on Amazon - 3
Mid Size PackYHAspace 120 Grit 12 lb9.5/10View on Amazon - 4
Precision WorkIndustrial Mineral #1209.4/10View on Amazon
Rust, old paint and weld scale do not belong under a fresh coat. Strip the surface back to clean metal, etch it so coating can grip, and keep the profile fine enough for paint. That job is where the best sandblasting media 120 grit earns its place in a blast cabinet or pressure pot.
Every pick here is aluminum oxide at the stated grit, so the choice comes down to pack weight, stated hardness, wet or dry use and packaging. The TITGGI pack states the fullest detail: a 19 lb bucket, a maker stated Mohs hardness of 9, and wet or dry use. The other packs state less, and each card below keeps every figure with the pack that states it.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall TITGGI 120 Grit 19 lb: The 19 lb bucket states Mohs hardness of 9, wet or dry use and no free silica, the fullest stated detail here. Check price on Amazon
- Small Jobs Kandylio #120 2.5 lb: A 2.5 lb pack with stated fit for bench cabinets, pressure blasters, siphon blasters and standard guns. Check price on Amazon
- Mid Size Pack YHAspace 120 Grit 12 lb: A 12 lb pack with maker stated Mohs hardness of 9 and wet or dry use for deburring and etching. Check price on Amazon
- Precision Work Industrial Mineral #120: An 8.0 lb fine pack stated for precision engraving, deburring and textured finishes on hard surfaces. Check price on Amazon
The machines

TITGGI 120 Grit Aluminum Oxide Blast Media
A 19 lb bucket of brown fused aluminum oxide at 120 grit, with a maker stated Mohs hardness of 9 and wet or dry use for rust and paint removal.
Pros
- Largest pack here at 19 lb in a white bucket
- Maker states Mohs hardness of 9 for the brown fused aluminum oxide
- Maker states wet or dry use and no free silica
- Stated for rust and paint removal and a fine matte finish
Cons
- A 19 lb bucket is the heaviest pack here to move and store
- Maker longevity claims give no cycle count to compare
- No cabinet or gun compatibility list is stated
- Bucket pack suits repeat work more than a small touch up job

#120 Grit Aluminum Oxide Blasting Media for All
A 2.5 lb pack of #120 grit aluminum oxide with sharp angular grains, stated for bench cabinets, pressure blasters, siphon blasters and standard guns.
Pros
- States compatibility with bench cabinets, pressure and siphon blasters
- Sharp angular grains stated for rust removal and paint stripping
- Maker states the media can be filtered and recycled multiple times
- Small 2.5 lb pack suits small cabinet and jewelry work
Cons
- Smallest pack here at 2.5 lb, so larger jobs need refills
- No hardness figure is stated for the grain
- Wet or dry use is not stated
- Packaging is not stated

Aluminum Oxide - 12 LBS
A 12 lb pack of #120 grit aluminum oxide with angular particles and a maker stated Mohs hardness of 9, for wet or dry deburring, cleaning and etching.
Pros
- Maker states Mohs hardness of 9 for the aluminum oxide
- Maker states wet or dry blasting use
- Angular particles stated for deburring, cleaning and etching
- Mid size pack at 12 lb between the small and large packs here
Cons
- No warranty term is stated
- No cabinet or gun compatibility list is stated
- Packaging is not stated
- Maker states glass will also be etched, so masked work needs care

Aluminum Oxide Blast Media (#120 Grit (Fine))
An 8.0 lb pack of #120 grit fine aluminum oxide stated for sandblasting, surface preparation, precision engraving, deburring and textured finishes.
Pros
- Stated for precision engraving as well as surface preparation
- Maker states sharp edges and cutting power through multiple uses
- Stated for cleaning, deburring and textured finishes on hard surfaces
- Mid size pack at 8.0 lb
Cons
- No warranty term is stated
- No hardness figure is stated for the grain
- Wet or dry use is not stated
- Packaging and equipment fit are not stated
Spec sheet comparison
| Model | Gear Score | Grit | Weight | Hardness | Wet or dry | Packaging | Warranty |
|---|---|---|---|---|---|---|---|
| TITGGI 120 Grit 19 lb | 9.6/10 | 120 grit | 19 lb | Mohs 9 | Wet or dry | White bucket | Not stated |
| Kandylio #120 2.5 lb | 9.5/10 | #120 grit | 2.5 lb | Not stated | Not stated | Not stated | Not stated |
| YHAspace 120 Grit 12 lb | 9.5/10 | #120 grit | 12 lb | Mohs 9 | Wet or dry | Not stated | Not stated |
| Industrial Mineral #120 | 9.4/10 | #120 grit (fine) | 8.0 lb | Not stated | Not stated | Not stated | Not stated |
Specifications are manufacturer rated, as published by each maker and collected 21 November 2026.
Buying guide: best sandblasting media 120 grit
What 120 grit does
Makers here state 120 grit for rust removal, paint stripping, surface preparation and a fine matte finish before painting, coating or refinishing. Kandylio calls the size a medium grit balance for heavy cleaning without over etching workpieces. Treat that balance claim as a maker claim and match the grit to the finish you need: a fine profile for coating prep, not a coarse strip for heavy scale.
Aluminum oxide, glass bead and silica
All picks here are aluminum oxide. TITGGI states its brown fused aluminum oxide will not break down as fast as glass blasting media and lasts 10 times longer than silica. Those are maker claims with no cycle count, so compare packs on stated hardness, pack weight and fit. For shop practice, blast with aluminum oxide and not silica sand, and wear a supplied air or rated respirator with eye protection.
Pack weight and packaging
Pack weights here run from 2.5 lb to 19 lb. The Kandylio pack at 2.5 lb suits bench cabinet and small gun work. The Industrial Mineral pack at 8.0 lb and the YHAspace pack at 12 lb sit in the middle. The TITGGI pack at 19 lb is the largest and the only pack that states packaging, a white bucket. Packaging for the other packs is not stated, so check how the media ships before you order.
Wet or dry use and reuse
TITGGI and YHAspace state wet or dry use. Kandylio and Industrial Mineral Supply do not state wet or dry use. On reuse, Kandylio states the media can be filtered and recycled multiple times, Industrial Mineral Supply states sharp edges through multiple uses, and TITGGI states a longer cycle life than most blast media. No maker states a cycle count, so plan on filtering spent media and judging cut by the finish on the work.
Surfaces and jobs
Stated surfaces differ by pack. TITGGI lists glass, granite, marble, ceramic and steel. Industrial Mineral Supply lists metal, glass, stone and other hard surfaces, plus precision engraving. Kandylio lists auto restoration, motorcycle frames, jewelry, molds, hardware and welding residue. YHAspace states glass will also be etched by aluminum oxide, so mask glass and finished areas you do not want etched.
Use as directed. Wear a supplied air or rated respirator and eye protection, keep dust contained in the cabinet or blast area, and follow the blaster manual for setup. Do not use silica sand. See our Safety Disclaimer.
Before You Strike an Arc
- Check the grit printed on the pack before you load the cabinet or pot.
- Match the media to the equipment fit each maker states, cabinet, pressure pot or siphon gun.
- Mask glass and finished surfaces you do not want etched.
- Keep spent media filtered and dry for reuse, and judge cut by the finish on the work.
FAQ for welders
Is 120 grit aluminum oxide good for rust and paint removal?
Makers here state 120 grit aluminum oxide for rust removal, paint stripping and surface preparation before coating. TITGGI states a fine matte finish, and Kandylio states fast rust removal and paint stripping with sharp angular grains.
Can 120 grit media be used wet?
TITGGI and YHAspace state wet or dry use for their packs. Kandylio and Industrial Mineral Supply do not state wet or dry use, so use those packs as the maker directs for your blaster.
How long does aluminum oxide blast media last?
No maker here states a cycle count. TITGGI states a longer cycle life than most blast media and 10 times longer than silica, Kandylio states the media can be filtered and recycled multiple times, and Industrial Mineral Supply states sharp edges through multiple uses.
Will 120 grit aluminum oxide etch glass?
YHAspace states glass will also be etched by aluminum oxide. TITGGI lists glass among the surfaces its media will clean and etch, and Kandylio lists glass etching among stated jobs, so mask glass you want to keep clear.
What pack weight should a home shop buy?
Packs here run from 2.5 lb to 19 lb. A 2.5 lb pack suits small cabinet jobs, 8.0 lb and 12 lb packs suit repeat home shop work, and the 19 lb bucket suits a shop that blasts often and can store the weight.
Related: best sandblasting media, best sandblasting media for aluminum, best air compressor for sandblasting and the metal finishing hub.
Scoring, line by line
Each pack is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No maker here states a safety standard or a warranty term, so no pick earns points on those criteria; the ranking comes from stated grit detail, pack weight, hardness, wet or dry use, equipment fit and packaging.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| TITGGI 120 Grit 19 lb | 9.6 | 29 | 21 | 22 | n/a | 0 |
| Kandylio #120 2.5 lb | 9.5 | 28 | 20 | 18 | n/a | 0 |
| YHAspace 120 Grit 12 lb | 9.5 | 26 | 18 | 20 | n/a | 0 |
| Industrial Mineral #120 | 9.4 | 23 | 18 | 19 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




