Best Adhesive Backed Measuring Tape (2026): 5 Steel Picks
Five steel adhesive measuring tapes compared by length, width, reading direction and pack size, from 39-inch to 78-inch tapes for the workbench.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJwodo 200cm Tape 2-Pack9.7/10View on Amazon - 2
Best BrandStarrett SM66W Tape Stix9.6/10View on Amazon - 3
Best Two-PackHZMM 78-Inch Tape 2-Pack9.6/10View on Amazon - 4
Best ValueQtcial 78-Inch Tape 2-Pack9.6/10View on Amazon - 5
Best Short TapeJwodo 100cm Tape 2-Pack9.6/10View on Amazon
A cut list means nothing if the bench has no fixed zero, and the best adhesive backed measuring tape gives the workbench, table saw and drafting table a permanent scale. This guide compares stick-on steel tapes by length, width, reading direction and pack size, each ranked by its Gear Score. Every tape below is steel with imperial and metric scales, so the choice comes down to length, width and which way the numbers run.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Jwodo 200cm Tape 2-Pack: Two 78-inch steel tapes, one reading each way Check price on Amazon
- Best Brand Starrett SM66W Tape Stix: Precision steel tape with polyurethane coating, 3/4 inch wide Check price on Amazon
- Best Two-Pack HZMM 78-Inch Tape 2-Pack: Two 78-inch steel tapes with rust and wear resistance Check price on Amazon
- Best Value Qtcial 78-Inch Tape 2-Pack: Two 78-inch steel tapes with dual scales and clear markings Check price on Amazon
- Best Short Tape Jwodo 100cm Tape 2-Pack: Two 39-inch tapes, one reading each way, for small benches Check price on Amazon
The machines

2-Pack Steel Self-Adhesive Measuring Tape
A 2-pack of 78-inch steel stick-on tapes, one reading left to right and one right to left, with imperial and metric scales.
Pros
- Two tapes in one pack, one reading left to right and one right to left
- 78-inch length with imperial and metric scales for fast conversion
- Steel tape with a waterproof and wear-resistant coating
- Cuts to any length with scissors and sticks to workbenches and table saws
Cons
- 1/2-inch width is narrower than the Starrett tape at 3/4 inch
- The pack holds two tapes, so a worn tape means buying the pair again
- Cutting to fit is permanent, so a miscut wastes tape
- No warranty term is stated

Starrett Tape Measure Stix, 3/4" x 72" (6')
A single 72-inch precision steel tape stix with adhesive backing, polyurethane coating and left-to-right or right-to-left reading.
Pros
- Precision steel with a polyurethane protective coating for extended service
- 3/4-inch width, the widest tape in this roundup
- Reads left to right or right to left, in English and metric graduations
- Cuts to size with scissors and mounts to workbenches, saws and drafting tables
Cons
- One tape in the pack, not two like the other sets
- 72 inches is shorter than the 78-inch tapes here
- Mounting is permanent adhesive, so moving the tape means replacing it
- Cutting to fit is permanent, so a miscut wastes tape

2 Pack Self-Adhesive Measuring Tape
A 2-pack of 78-inch steel stick-on tapes with dual scales, waterproof and rust-resistant build, and left-to-right reading.
Pros
- Two 78-inch steel tapes in one pack for bench and saw
- Dual imperial and metric scales with large, clear markings
- Waterproof and resistant to rust and wear
- Cuts with scissors, peels and sticks to workbenches, table saws and drafting tables
Cons
- Left-to-right reading only, with no right-to-left tape in the pack
- 1/2-inch width is narrower than the Starrett tape at 3/4 inch
- Mounting is permanent adhesive, so moving the tape means replacing it
- Cutting to fit is permanent, so a miscut wastes tape

2 Packs 1/2-Inch Self-Adhesive Measuring Tape
A 2-pack of 78-inch steel stick-on tapes with dual scales, waterproof and wear-resistant coating, and left-to-right reading.
Pros
- Two 78-inch steel tapes in one pack for bench and saw
- Dual imperial and metric scales with large, clear markings
- Waterproof and wear-resistant coating for extended use
- White color and clear markings read quickly at a glance
Cons
- Left-to-right reading only, with no right-to-left tape in the pack
- 1/2-inch width is narrower than the Starrett tape at 3/4 inch
- White only, with no yellow high-visibility version like the Jwodo 100cm set
- Mounting is permanent adhesive, so moving the tape means replacing it

2Pcs Steel Self-Adhesive Measuring Tape
A 2-pack of 39-inch steel stick-on tapes, one reading left to right and one right to left, with imperial and metric scales.
Pros
- Two tapes in one pack, one reading left to right and one right to left
- 39-inch length with imperial and metric scales for small benches
- Steel tape with a waterproof and anti-corrosive build
- Yellow color stands out on the bench for quick reading
Cons
- 39 inches is the shortest length here
- The 39-inch length needs a second tape for longer bench runs
- Mounting is permanent adhesive, so moving the tape means replacing it
- No warranty term is stated
Spec sheet comparison
| Tape | Gear Score | Length | Width | Pack | Reading |
|---|---|---|---|---|---|
| Jwodo 200cm Tape 2-Pack | 9.7/10 | 78 in (200 cm) | 1/2 in | 2 tapes | Left-to-right and right-to-left |
| Starrett SM66W Tape Stix | 9.6/10 | 72 in (6 ft) | 3/4 in | 1 tape | Left-to-right or right-to-left |
| HZMM 78-Inch Tape 2-Pack | 9.6/10 | 78 in (200 cm) | 1/2 in | 2 tapes | Left-to-right |
| Qtcial 78-Inch Tape 2-Pack | 9.6/10 | 78 in (200 cm) | 1/2 in | 2 tapes | Left-to-right |
| Jwodo 100cm Tape 2-Pack | 9.6/10 | 39 in (100 cm) | 1/2 in | 2 tapes | Left-to-right and right-to-left |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026.
How to choose the best adhesive backed measuring tape
Length and pack size
Length runs from 39 inches on the short Jwodo set to 78 inches on the Jwodo, Qtcial and HZMM sets, with the Starrett stix at 72 inches, or 6 feet. Four sets hold two tapes, while the Starrett pack holds one tape. Longer tapes suit full benches and table saws, while the 39-inch set suits small benches and short runs. For longer runs, see the best 25 ft tape measure.
Reading direction and scales
Every tape below carries imperial and metric scales with large, clear markings. The Jwodo packs hold one tape reading left to right and one reading right to left, so a maker can match the tape to the bench. The Starrett stix reads left to right or right to left, while the Qtcial and HZMM tapes read left to right. See measuring tape measurements for how to read the scales.
Steel, coating and sticking
All five tapes are precision steel with an adhesive backing, and most carry a waterproof and wear-resistant coating. The Starrett stix adds a polyurethane protective coating, the HZMM tape resists rust and wear, and the short Jwodo tape is waterproof and anti-corrosive. Each tape cuts with scissors to the length the bench needs, then peels and sticks to workbenches, table saws and drafting tables. See the best layout ruler for marking alongside the tape.
Width on the bench
Width runs from 1/2 inch on four sets to 3/4 inch on the Starrett stix. Wider tape shows larger markings and covers more bench, while narrower tape fits tight spots and thin edges. The 1/2-inch tapes suit most benches, and the 3/4-inch Starrett suits makers who want the widest scale on the bench.
Before You Strike an Arc
- Cut each tape with scissors to the bench length before peeling the backing.
- Check the reading direction before sticking: the Jwodo packs hold one left-to-right tape and one right-to-left tape.
- Stick the tape to a flat surface: workbench, table saw or drafting table, as the maker names.
- Keep a second tape from the 2-pack for the next bench or saw.
FAQ for welders
How long are these adhesive measuring tapes?
Three sets run 78 inches, or 200 cm. The Starrett stix runs 72 inches, or 6 feet, and the short Jwodo set runs 39 inches, or 100 cm.
Can you cut an adhesive measuring tape to length?
Yes. The Jwodo, Starrett, Qtcial and HZMM listings all state the tape cuts with scissors, so a maker can trim it to the bench or saw before sticking it down.
Do these tapes read left to right and right to left?
The Jwodo packs hold one tape reading left to right and one reading right to left. The Starrett stix reads left to right or right to left, while the Qtcial and HZMM tapes read left to right.
Will the adhesive hold on a table saw?
The makers name table saws among the surfaces, with workbenches and drafting tables. The tapes use a strong adhesive backing, and the steel carries a waterproof and wear-resistant coating.
Scoring, line by line
Each tape is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Measuring tapes have no electrical safety listing to state, so every tape here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Jwodo 200cm Tape 2-Pack | 9.7 | 32 | 21 | 22 | n/a | 0 |
| Starrett SM66W Tape Stix | 9.6 | 30 | 22 | 20 | n/a | 0 |
| HZMM 78-Inch Tape 2-Pack | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Qtcial 78-Inch Tape 2-Pack | 9.6 | 29 | 20 | 21 | n/a | 0 |
| Jwodo 100cm Tape 2-Pack | 9.6 | 28 | 20 | 20 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.
More welding guides
See every measuring and layout guide. Also see the best layout ruler. Also see the best 25 ft tape measure. Also see the measuring tape measurements.




