Knotted vs Crimped Wire Wheel: Which Should You Buy?
Knotted vs crimped wire wheel: four wire wheels compared, two knotted for aggressive removal and two crimped for lighter work, from 1.5 to 3 inches.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Lincoln Electric KH305 Knotted Wire Wheel Brush9.5/10View on Amazon - 2
FPPO 3PCS 3 Inch Knotted Wire Wheel Cup Brush9.4/10View on Amazon - 3
Double Elite Wire Brush for Drill Set 21 Pcs9.4/10View on Amazon - 4
VIDICA Wire Brush for Drill Set 9Pcs,Abrasive Wire9.4/10View on Amazon
Verdict. Knotted vs crimped wire wheel? Pick knotted for aggressive rust and paint removal: the Lincoln Electric KH305 example runs at 20000 rpm with a knotted wire bristle. Pick crimped for lighter deburring and polishing: the 21-piece and 9-piece sets offer more pieces for varied tasks. Match the wheel to the aggression you need.
Knotted and crimped wire wheels both clean metal, but they cut differently. Knotted wheels have twisted wire tufts for aggressive material removal; crimped wheels have wavy wires for lighter work. This comparison puts two knotted and two crimped examples side by side on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The four wheels

Lincoln Electric KH305 Knotted Wire Wheel Brush
A Lincoln Electric knotted wire wheel brush, 20000 rpm, single wheel.
Pros
- 20000 rpm stated
- Lincoln Electric brand
- Knotted wire
- Single wheel focus
Cons
- No warranty stated
- Single piece only
- Angle grinder arbor only
- Black color only

FPPO 3PCS 3 Inch Knotted Wire Wheel Cup Brush
A 3-piece knotted wire wheel set, 3 inch, coarse, alloy steel.
Pros
- 3 pieces
- 3 inch
- Coarse grit
- Alloy steel
Cons
- No warranty stated
- No speed stated
- Silver only
- 3 pieces only

Double Elite Wire Brush for Drill Set 21 Pcs
A 21-piece crimped wire brush set for drills, 3 inch, carbon steel, 1.9 pounds.
Pros
- 21 pieces
- 3 inch
- Carbon steel
- 1.9 lbs
Cons
- No warranty stated
- No speed stated
- Crimped only
- Drill mount only
Other welders and gear to compare
AUPREX 5 Pack Knotted Wire Cup Brush for Angle Grinders withCheck price on Amazon
DEWALT Wire Cup BrushCheck price on Amazon
HOYIN 1-1/8" Twist Knotted Wire End BrushCheck price on Amazon
Side by side
| Wheel | Type | Pieces | Size | Speed | Warranty |
|---|---|---|---|---|---|
| Lincoln KH305 | Knotted | 1 | 4×0.5 in | 20000 rpm | Not stated |
| FPPO 3-Pc Knotted | Knotted | 3 | 3 in | 4500 rpm max | Not stated |
| Double Elite 21-Pc | Crimped | 21 | 3 in | Not stated | Not stated |
| VIDICA 9-Pc | Crimped | 9 | 1.5 to 3 in | 4500 rpm max | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 21 October 2026.
Knotted vs crimped wire wheel: the core difference
The knotted examples (FPPO 3-piece and Lincoln Electric KH305) use knotted wire bristles for coarse, aggressive work like rust removal; the FPPO listing also names paint removal. The crimped examples (VIDICA 9-piece and Double Elite 21-piece) use crimped wire for deburring, polishing and lighter rust removal. The listings state “coarse” grit for three of the four.
Piece count
The crimped side offers more pieces: 21 in the Double Elite set and 9 in the VIDICA set, versus 3 in the FPPO knotted set and 1 in the Lincoln Electric. More pieces mean more shapes and sizes for different tasks.
Speed rating
The Lincoln Electric KH305 states 20000 rpm, while the FPPO and VIDICA listings state a 4500 RPM maximum. The Double Elite listing states no rpm. Match the wheel’s stated maximum to your tool’s speed.
Size
The FPPO and Double Elite are 3-inch wheels; the VIDICA set includes 3, 2.5, 2 and 1.5 inch wheels, though its spec table lists a single 1.5 inch figure. The Lincoln Electric lists 4 by 0.5 inches. Match the wheel diameter to your grinder or drill.
Arbor or shank: match the wheel to your tool
Three of the four picks use a 1/4 inch shank or 1/4 inch hex shank and fit a drill: the FPPO knotted set, the VIDICA crimped set and the Double Elite crimped set. The Lincoln Electric KH305 is different: it has a 5/8-11 UNC arbor and fits an angle grinder, not a drill. The Double Elite notes its hex shank fits a regular power drill and a pneumatic air drill. Buy the arbor style for your tool; a wheel that does not mount is useless.
Wire thickness
The VIDICA and Double Elite crimped sets use 0.012 inch carbon steel wires. The FPPO states hardened steel wire for reduced breakage but no diameter.
Speed ratings: 4500 RPM vs 20000 RPM
The Lincoln Electric KH305 is rated 20000 rpm for grinder use. The FPPO knotted set and the VIDICA crimped set state a 4500 RPM maximum for drill use. The Double Elite states no speed rating. Never exceed the stated maximum: a drill that spins faster than 4500 RPM can throw wires from a drill-rated wheel, and the FPPO listing reminds users to wear goggle or eye protection. The Double Elite listing advises goggles, mask, protective gloves and protective clothing.
Wheel, cup and end brush shapes
The FPPO knotted set includes a wheel brush, a cup brush and an end brush. The VIDICA crimped set has wheels from 1.5 to 3 inches, cup brushes in 2.5 and 2 inches, and 1 inch pen brushes for tight spots. The Double Elite crimped set has 15 wire wheels, 3 wire cup brushes and 3 wire end brushes, with the 3/4 inch end brush stated as best for narrow holes and confined areas. Wheels suit edges and sides, cups suit flat surfaces, and end brushes suit holes and corners.
Carbon steel vs stainless steel wire
The VIDICA and Double Elite use carbon steel wire, which suits general rust and paint removal on steel. The Lincoln Electric KH305 uses stainless steel wire, and its listing states it can reduce discoloration on stainless and aluminum alloys and resists corrosion where contamination or after rust is a problem. For work on stainless or aluminum, the stainless wire wheel avoids embedding carbon steel particles that can later rust.
Set size: 1 wheel vs 21 pieces
The Lincoln Electric KH305 is a single wheel, pack of 1, for a shop that knows exactly what it needs. The FPPO knotted set has 3 pieces: a wheel, a cup and an end brush. The VIDICA crimped set has 9 pieces across wheels, cups and pen brushes. The Double Elite crimped set has 21 pieces, stated as more cost-efficient than buying from a local tool store. A large set covers more jobs but stores more brushes; a single wheel is the cheapest way to try one style. The Double Elite set weighs 1.9 pounds in the box.
FAQ for welders
What is the difference between knotted and crimped?
In these listings, knotted wheels have twisted wire tufts for aggressive removal; crimped wheels have wavy wires for lighter deburring and polishing.
Which is more aggressive?
Knotted, per the listings. The FPPO knotted example lists rust removal and paint removal, and the Lincoln knotted example lists rust removal and deburring; the crimped examples add polishing.
Which set has the most pieces?
The Double Elite crimped set with 21 pieces. The FPPO knotted has 3, the VIDICA crimped has 9, and the Lincoln Electric is a single wheel.
Which states a speed rating?
The Lincoln Electric KH305 at 20000 rpm, and the FPPO and VIDICA at a 4500 RPM maximum. The Double Elite states none.
Related: best wire wheel for rust removal, knotted vs crimped wire cup brush, and the metal fab tools hub.
Scoring, line by line
All four are scored on performance, build, value, safety listing and warranty. None of the listings states a safety certification or warranty term, so those score zero. The Lincoln Electric leads on brand and the stated 20000 rpm.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Lincoln KH305 | 9.5 | 30 | 20 | 20 | 0 | 0 |
| FPPO 3-Pc Knotted | 9.4 | 29 | 20 | 20 | 0 | 0 |
| Double Elite 21-Pc | 9.4 | 28 | 20 | 20 | 0 | 0 |
| VIDICA 9-Pc | 9.4 | 27 | 20 | 20 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.
Before you strike an arc. Wear eye protection and gloves with wire wheels; flying wires hurt. Check the wheel’s max rpm against your tool, secure the work, and keep hands clear of the spinning wheel.
[wgl_safety kind=”tool”]




