Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Rust Converter for Frame (2026): 5 Picks

5 rust converters and primers for frames, from a 14 oz Eastwood aerosol to 1 gallon SENVEN and FDC cans, ranked by Gear Score.

Best Rust Converter for Frame (2026): 5 Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Eastwood Frame CoatingBest OverallEastwood Frame Coating9.6/10View on Amazon
  2. 2SENVEN 1 GallonBest GallonSENVEN 1 Gallon9.6/10View on Amazon
  3. 3Ouzuye 35 ozBest Water-BasedOuzuye 35 oz9.6/10View on Amazon
  4. 4FDC Ultra GallonBest SprayFDC Ultra Gallon9.5/10View on Amazon

A truck frame comes back from winter with rust blooming along the rails, and a wire wheel alone will not hold it back. The best rust converter for frame work turns that rust into a stable coating you can prime and paint, without cutting the frame apart. This roundup compares 5 converters and primers on size, form, heat resistance, dry time and warranty, and ranks them by the Gear Score.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Eastwood Frame Coating: Only stated warranty here, 90 days, with an extension tube for inside frames Check price on Amazon
  • Best Gallon SENVEN 1 Gallon: 1 gallon of 2-in-1 converter and primer, heat resistant to 350 degrees Fahrenheit Check price on Amazon
  • Best Water-Based Ouzuye 35 oz: 35 oz water-based converter, heat stable to 350F, with stated coverage per liter Check price on Amazon
  • Best Spray FDC Ultra Gallon: 1 gallon spray covering 500 square of smooth surface, per the listing Check price on Amazon

The machines

Eastwood Internal Frame Coating Aerosol

Eastwood Internal Frame Coating Aerosol

Eastwood9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

14 oz aerosol internal frame coating with an extension tube for inside rails, plus a 90-day limited warranty.

Pros

  • Extension tube sprays inside frame rails and bolt holes
  • Only stated warranty here: 90-day limited with 90-day return
  • Converter and prevention in one aerosol
  • Lifetime Tech Support stated on the listing

Cons

  • 14 oz is the smallest size here
  • No heat figure is stated
  • No dry time is stated
  • California cancer and reproductive harm warning stated on the listing
2 in 1 Rust Converter and Metal Primer 1

2 in 1 Rust Converter and Metal Primer 1

SENVEN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

1 gallon 2-in-1 rust converter and metal primer in black, heat resistant to 350 degrees Fahrenheit, for frames, chassis and trailers.

Pros

  • 2-in-1 converter and metal primer for frames and chassis
  • Heat resistant to 350 degrees Fahrenheit
  • Recoat in 2 to 5 hours when dry to the touch
  • 1 gallon size suits a full frame and chassis

Cons

  • No warranty term is stated on the listing
  • No coverage figure is stated
  • Bullets call the brand SEVEN once, where the title says SENVEN
  • No application tool is stated, brush, roller or spray
2 in 1 Rust Converter & Metal Primer

2 in 1 Rust Converter & Metal Primer

Ouzuye9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

35 oz water-based 2-in-1 rust converter and primer, heat stable to 350F, with stated coverage per liter and a 24 hour dry time.

Pros

  • Water-based formula, cleans up with water
  • Heat stable to 350F (176C)
  • Stated coverage, about 6 to 8 square meters per liter
  • Brush, roller or spray application

Cons

  • Coverage falls to 4 to 6 square meters per liter on heavily rusted surfaces
  • Matte black is the only color stated
  • 24 hours to dry and form a film, so plan the job around it
HORHIZA 2 in 1 Black Rust Converter & Metal Primer

HORHIZA 2 in 1 Black Rust Converter & Metal Primer

HORHIZA9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

42 oz water-based 2-in-1 rust converter and metal primer in black, with 2 to 3 thin coats and a 24 hour dry time.

Pros

  • Water-based, non-toxic and low-odor formula
  • No primer required, apply direct to rusted or clean metal
  • UV, chemical and abrasion resistance stated
  • 42 oz suits frames, chassis, trailers and machinery

Cons

  • No warranty term is stated on the listing
  • No heat figure is stated, only heat-resistant
  • No coverage figure is stated
  • Brush application only, per the listing
FDC Rust Converter Ultra

FDC Rust Converter Ultra

FDC9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

1 gallon rust converter spray, covering 500 square of smooth surface per the listing, at 8.0 lb.

Pros

  • 1 gallon spray covers 500 square of smooth surface, per the listing
  • Spray application for large panels and frames
  • Maker claims no sandblasting, grinding or scraping is needed
  • Suits automobiles, machinery, railings and marine use, per the listing

Cons

  • No warranty term is stated on the listing
  • No heat figure is stated
  • No dry time is stated
  • Coverage unit is not stated, only 500 square

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Size Form Heat resistance Dry time Coats Warranty
Eastwood Frame Coating 9.6/10 14 oz Aerosol with extension tube Not stated Not stated Not stated 90-day limited
SENVEN 1 Gallon 9.6/10 1 gal / 128 oz Paint Up to 350 F 2 to 5 hours to recoat Minimum 2 thin coats Not stated
Ouzuye 35 oz 9.6/10 35 oz Brush, roller or spray Up to 350F (176C) 24 hours Minimum 2 thin coats Not stated
HORHIZA 42 oz 9.6/10 42 oz Brush-on paint Heat-resistant, no figure stated 24 hours 2 to 3 thin coats Not stated
FDC Ultra Gallon 9.5/10 1 gal / 128 oz Spray Not stated Not stated Not stated Not stated

Ratings in this table are the makers’ own claims taken from each product page (11 November 2026).

Buying guide: the best rust converter for frame

Converter and primer in one

3 of the 5 here state a 2-in-1 converter and primer: SENVEN, Ouzuye and HORHIZA. Eastwood states a converter and prevention aerosol, and FDC states a converter spray. A 2-in-1 saves a priming step where the listing states it; where it does not, plan on a primer coat.

Size and coverage

Sizes run from a 14 oz aerosol to 1 gallon cans. The Ouzuye states coverage of about 6 to 8 square meters per liter, falling to 4 to 6 on heavily rusted or rough surfaces, and the FDC states 1 gallon covers 500 square of smooth, nonporous surface. The SENVEN and HORHIZA state no coverage figure, so buy by the size of the frame, not by the label.

Heat resistance

Two converters state a heat figure: SENVEN and Ouzuye state heat resistance up to 350 degrees Fahrenheit, with Ouzuye adding 176C. The Eastwood, HORHIZA and FDC state no heat figure, so do not assume they suit an engine bay or brake parts.

Dry time and coats

Dry time decides when the frame goes back to work. SENVEN states recoating in 2 to 5 hours when dry to the touch. Ouzuye and HORHIZA state 24 hours for drying and forming a film. Eastwood and FDC state no dry time. The SENVEN, Ouzuye and HORHIZA state thin coats: a minimum of 2 for SENVEN and Ouzuye, and 2 to 3 for HORHIZA.

Inside the frame

Frames rust from the inside out, and only the Eastwood states an extension tube for frame openings and bolt holes. The other converters state brush, roller or spray application on open metal. If the inside of the rails matters, the aerosol with a tube is the only pick here made for it.

Use as directed. Keep the area clear and ventilated, wear eye, skin and respiratory protection when applying these coatings, and keep them away from open flame, per the Eastwood listing. See the OSHA welding overview and our Safety Disclaimer.

Before You Strike an Arc

  • Check the size: 14 oz for the Eastwood aerosol, 35 oz for the Ouzuye, 42 oz for the HORHIZA, and 1 gallon for the SENVEN and FDC.
  • Check the form: aerosol with an extension tube for the Eastwood, brush, roller or spray for the Ouzuye, brush for the HORHIZA, and spray for the FDC.
  • Check the heat figure: 350 degrees Fahrenheit stated for the SENVEN and Ouzuye, and no figure stated for the others.
  • Check the dry time: 2 to 5 hours for the SENVEN, 24 hours for the Ouzuye and HORHIZA, and no time stated for the Eastwood and FDC.
  • Check the warranty: a 90-day limited warranty stated for the Eastwood, and no term stated for the others.

FAQ for welders

What is rust converter?

A coating that turns rust into a stable layer you can prime and paint, instead of bare metal. The converters here state they seal out moisture and air. It is a surface treatment, not new steel.

How does rust converter work?

It reacts with the rust and converts it into a stable black coating, per the Ouzuye and SENVEN listings. The coating then seals the metal from moisture and air. Apply it to rusted metal after removing loose rust, grease and oil.

How long does rust converter last?

No listing here states a service life in years, so there is no figure to quote. The listings state the coating seals out moisture, air and salt. Durability depends on prep, coats and top coat, so follow the listing directions.

How do I use rust converter on a car frame?

Remove grease, oil and loose rust first, then apply thin coats: a minimum of 2 for the SENVEN and Ouzuye, and 2 to 3 for the HORHIZA. The Eastwood aerosol uses an extension tube for inside frame rails. Let it dry for the time the listing states before top coating.

What is rust converter paint?

A paint that combines a rust converter with a primer or top coat in one product. The SENVEN, Ouzuye and HORHIZA state a 2-in-1 converter and primer. The FDC states a converter spray, and the Eastwood states a converter and prevention aerosol.

Related: the best rust converter for auto body, the rust remover vs rust converter for car, the best weld through primer and the welding consumables hub.

Scoring, line by line

Each converter is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Rust converters state no electrical safety listing, so no converter earns safety points here; the ranking comes from the other criteria plus warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Eastwood Frame Coating 9.6 29 20 20 n/a 2
SENVEN 1 Gallon 9.6 32 21 21 n/a 0
Ouzuye 35 oz 9.6 30 21 21 n/a 0
HORHIZA 42 oz 9.6 29 20 21 n/a 0
FDC Ultra Gallon 9.5 28 19 20 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides